Danze
DC013330-DC012323 SPECIFICATIONS
ORRINGTON® 2 PIECE HIGH EFFICIENCY TOILET
Model
Bowl: DC013330 (2 Piece High Efficiency Toilet Bowl)
Tank: DC012323 (2 Piece High Efficiency Toilet Tank)
Description
- 3" flush valve technology with Flushmaster® pilot valve
- Elongated bowl with 12" rough-in
- 16 3/4" rim height
- Fully glazed trapway
- Water consumption rating: 1.28 gpf (4.8 Lpf)
- Accessories included: soft-close seat, matching color bolt caps (for Model # DC013330) and angle mounted brass tank lever in Brushed Nickel finish (for Model # DC012323)
Standards
- UPC
- ASME A112.19.2
- CSA B45.1
- ADA Accessibility Guidelines for Buildings and Facilities - 4.16 Water Closets
Warranty
Five Year Limited Warranty (Vitreous China)
Technical Information
| Feature | Value |
|---|---|
| Configuration | two-piece, elongated |
| Water per flush | 1.28 gpf / 4.8 Lpf |
| Trapway | 2 1/8" (5.4 cm) |
| Water depth from rim | 5 1/2" (14 cm) |
| Water area | 7 1/4" (18.5 cm) x 9 1/2" (24.2 cm) |
| Seat post hole centers | 5 1/2" (14 cm) |
| Operating static pressure range | 20 to 80 psi |
Colors Available
- White (WH)
- Biscuit (BC)
Optional Accessories
| Model | Description | Finish |
|---|---|---|
| D497661 | Orrington® angle mount tank lever | Chrome |
| D497661BN | Orrington® angle mount tank lever | Brushed Nickel |
| D497661RB | Orrington® angle mount tank lever | Oil Rub Bronze |
Product Dimensions and Installation Diagram
The diagram illustrates the physical dimensions and installation layout of the toilet. Key dimensions include:
- Overall Height: 32 inches (81.3 cm)
- Rim Height: 16 3/4 inches (42.5 cm)
- Rough-in: 12 inches (30.5 cm) from finished wall
- Bowl Depth: Approximately 17 1/2 inches (44.5 cm)
- Bowl Width: Approximately 15 inches (38.1 cm)
- Seat Post Hole Centers: 5 1/2 inches (14 cm)
- Water Supply Connection: Shown on the left side of the tank.
- Base Dimensions: The base footprint is approximately 10 3/8 inches (26.4 cm) from front to back and 15 3/8 inches (39 cm) wide at the widest point.
- Wall Clearance: 9 inches (22.9 cm) from finished wall to the center of the trapway outlet.
Important Note
Dimensions of fixtures are nominal and may vary within the range of tolerance established by ASME Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Submittal Information
Job Name: [Placeholder]
Contractor: [Placeholder]
Location: [Placeholder]
Contact #: [Placeholder]
