Description
- 3" flush valve technology with Flushmaster® pilot valve
- Elongated bowl with 12" rough-in
- 16 1/2" rim height
- Fully glazed trapway
- Water consumption rating: 1.6 gpf (6 Lpf)
- Accessories included: soft-close seat, matching color bolt caps (for Model # DC013230) and angle mounted brass tank lever in Brushed Nickel finish (for Model # DC012223)
Standards
- UPC [Universal Plumbing Code]
- ASME A112.19.2 [American Society of Mechanical Engineers standard for vitreous china plumbing fixtures]
- CSA B45.1 [Canadian Standards Association standard for plumbing fixtures]
- ADA Accessibility Guidelines for Buildings and Facilities - 4.16 Water Closets [Americans with Disabilities Act guidelines]
Warranty
Five Year Limited Warranty (Vitreous China)
Technical Information
| Fixture Specifications | |
|---|---|
| Configuration | two-piece, elongated |
| Water per flush | 1.6 gpf / 6 Lpf |
| Trapway | 2 1/8" (5.4 cm) |
| Water depth from rim | 4 7/8" (12.5 cm) |
| Water area | 9" (22.7 cm) x 11 3/4" (29.8 cm) |
| Seat post hole centers | 5 1/2" (14 cm) |
| Operating static pressure range | 20 to 80 psi |
Colors Available
- White (WH)
- Biscuit (BC)
Product Dimensions and Diagram
The product diagram illustrates the physical dimensions and installation requirements for the Orrington® toilet. Key dimensions include:
- Overall Height: 31 1/2"
- Tank Height: 16 1/2"
- Rough-in (distance from finished wall to center of trapway): 12"
- Water depth from rim: 4 7/8"
- Seat post hole centers: 5 1/2"
- Overall Depth (from finished wall): 29"
- Overall Width (at base): 15"
- Bowl Width (top view): 5 1/2"
- Bowl Depth (top view): 10 1/8"
- Tank Lever Slot: 1/2" X 1"
The diagram also indicates the location for the 3/8" S.P.S. SUPPLY connection and shows the relationship to the FINISHED WALL and FINISHED FLOOR.
Optional Accessories
| Model | Description | Finish |
|---|---|---|
| D497661 | Orrington® angle mount tank lever | Chrome |
| D497661BN | Orrington® angle mount tank lever | Brushed Nickel |
| D497661RB | Orrington® angle mount tank lever | Oil Rub Bronze |
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerance established by ASME Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Submittal Information
Job Name: _________________________ Contractor: _________________________ Location: _________________________ Contact #: _________________________
