Model
DC023330 (2 Piece High Efficiency Toilet Bowl)
DC022321 (2 Piece High Efficiency Toilet Tank)
Description
- 3" flush valve technology with Fluidmaster® pilot valve
- Elongated bowl with 12" rough-in
- 16 1/2" rim height
- Fully glazed concealed trapway
- Water consumption rating: 1.28 gpf (4.8 Lpf)
- Accessories included: soft-close seat, matching color ceramic floor bolt cover plates (for Model #DC023330) and side mounted tank lever in Brushed Nickel finish (for Model # DC022321)
Standards
- UPC certified
- ASME A112.19.2 certified
- CSA B45.1 certified
- ADA Accessibility Guidelines for Buildings and Facilities - 4.16 Water Closets compliant
Warranty
Five Year Limited Warranty (Vitreous China)
Technical Information
| Fixture | Value |
|---|---|
| Configuration | two-piece, elongated |
| Water per flush | 1.28 gpf / 4.8 Lpf |
| Trapway | 2 1/8" (5.4 cm) |
| Water depth from rim | 5 3/8" (13.7 cm) |
| Water area | 7 1/2" (19 cm) x 9 3/4" (24.6 cm) |
| Seat post hole centers | 5 1/2" (14 cm) |
| Operating static pressure range | 20 to 80 psi |
Optional Accessories
| Model | Description | Finish |
|---|---|---|
| D497441 | Cirtangular® side mount tank lever | Chrome |
| D497441BN | Cirtangular® side mount tank lever | Brushed Nickel |
| D497441RB | Cirtangular® side mount tank lever | Oil Rub Bronze |
Colors Available
- White (WH)
- Biscuit (BC)
Dimensions
Diagram Description: The diagram illustrates the side and top views of the toilet, indicating key dimensions relative to the finished wall and floor.
- Finished Wall to Front of Bowl: 28 3/4"
- Rough-in (distance from finished wall to center of drain): 12"
- Rim Height: 16 1/2"
- Water depth from rim: 5 3/8" (13.7 cm)
- Water area: 7 1/2" (19 cm) x 9 3/4" (24.6 cm)
- Seat post hole centers: 5 1/2" (14 cm)
- Overall Height (tank): 31 3/4"
- Tank Width: 8 3/4"
- Bowl Width (at widest point): 14 3/4"
- Bowl Depth (front to back): 18 1/2"
- Trapway Width: 2 1/8" (5.4 cm)
- Flush Valve Diameter: 5 1/2"
- Water Supply Connection: 3/8" S.P.S. SUPPLY
- Tank Bolt Slot Dimensions: 1/2" X 1"
Important Note
Dimensions of fixtures are nominal and may vary within the range of tolerance established by ASME Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Submittal Information
Job Name: [Placeholder]
Contractor: [Placeholder]
Location: [Placeholder]
Contact #: [Placeholder]
