Danze
SPECIFICATIONS
ZIGA ZAGA® 1 PIECE TOILET
Model: DC031221
Description
- 3" flush valve technology with Fluidmaster® pilot valve
- Elongated bowl with 12" rough-in
- 16 1/2" rim height
- Fully glazed concealed trapway
- Water consumption rating: 1.6 gpf (6 Lpf)
- Accessories included: soft-close seat, side mounted tank lever in Chrome finish and matching color ceramic floor bolt cover plates
Standards
- [UPC Certification] • UPC
- [ASME Certification] • ASME A112.19.2
- [CSA Certification] • CSA B45.1
- [ADA Compliance] • ADA Accessibility Guidelines for Buildings and Facilities - 4.16 Water Closets
Warranty
Five Year Limited Warranty (Vitreous China)
Technical Information
| Fixture | |
|---|---|
| Configuration | one-piece, elongated |
| Water per flush | 1.6 gpf / 6 Lpf |
| Trapway | 2 1/8" (5.4 cm) |
| Water depth from rim | 5 1/8" (13 cm) |
| Water area | 11 3/4" (30 cm) x 8 5/8" (22 cm) |
| Seat post hole centers | 5 1/2" (14 cm) |
| Operating static pressure range | 20 to 80 psi |
Colors Available
- White (WH)
Diagram and Dimensions
The diagram illustrates the side and top views of the Ziga Zaga 1-Piece Toilet, showing installation dimensions relative to the finished wall and floor.
Key Dimensions:
- Overall Height (approximate): 29 5/8"
- Bowl Height (to rim): 16 1/2"
- Tank Width: 7 1/8"
- Overall Depth (from wall): 28 3/4"
- Rough-in (distance from finished wall to center of drain): 12"
- Water Supply Connection: 3/8" S.P.S.
- Trapway Width: 2 1/8" (5.4 cm)
- Water Depth from Rim: 5 1/8" (13 cm)
- Water Area: 11 3/4" (30 cm) x 8 5/8" (22 cm)
- Seat Post Hole Centers: 5 1/2" (14 cm)
- Slot for floor bolt covers: 1/2" x 1"
- Distance from wall to center of seat post holes: 4 5/8"
- Distance from wall to center of trapway: 18 5/8"
- Overall Width (at widest point): 14 1/2"
- Distance from floor to water supply connection: 8"
- Distance from floor to trapway center: 14"
- Distance from floor to seat post holes: 14 1/2"
- Distance from floor to front of bowl: 16 1/2"
Optional Accessories
| Model | Description | Finish |
|---|---|---|
| D497440 | Sirius™ side mount tank lever | Chrome |
| D497440BN | Sirius™ side mount tank lever | Brushed Nickel |
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerance established by ASME Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Submittal Information
Job Name: _________________________
Contractor: _________________________
Location: _________________________
Contact #: _________________________
