Gembird WM-75T-04 Tilt TV Wall Mount
User Manual
General Information
This product is manufactured by or on behalf of Gembird Europe B.V. Inquiries to the EU Importer or related to product compliance in Europe should be sent to: Gembird Europe B.V., Wittevrouwen 56, 1358 CD, Almere, The Netherlands. www.gmb.nl
Warranty conditions: www.gmb.nl/warranty
Product support: www.gmb.nl/service and/or helpdesk@gembird.nl
Safety
To ensure safe handling of the product, follow the safety advice on the website. The website provides safety instructions in multiple languages including German, Dutch, Spanish, French, Italian, Portuguese, Polish, Romanian, Slovak, Slovenian, Croatian, Hungarian, Bulgarian, Russian, and Ukrainian.
Compatibility:
- Supports TVs from 32" to 75"
- Maximum weight capacity: 75 kg
- Maximum VESA mounting pattern: 400x400 mm
Made in CHINA
Product Identification
Model Number: WM-75T-04
Product Type: TV wall mount (tilt)
Assembly Instructions
The following components are included:
- A (x1): Wall plate
- B (x2): Mounting brackets
- C (x2): Decorative covers
- M-A (x4): M6x14 screws
- M-B (x4): M8x16 screws
- M-C (x4): M6x30 screws
- M-D (x4): M8x35 screws
- M-E (x4): Ø15xØ8x5 spacers
- M-F (x4): Ø15xØ8x15 spacers
- M-G (x4): D8 washers
- W-A (x6): ST6.3x55 screws
- W-B (x6): Ø10x45 screws
- W-C (x6): D6 wall plugs
Step 1: Attach Brackets to TV
Attach the mounting brackets (B) to the back of the TV using the appropriate screws (M-A, M-B, M-C, M-D) and spacers (M-E, M-F, M-G) as needed. Ensure the brackets are oriented correctly (TOP indicated).
Step 2: Mount Wall Plate to Wall
Locate the desired position on the wall. Use a stud finder to ensure secure mounting. Drill holes using the specified drill bit size (e.g., Ø4.5mm for W-A screws, 55mm depth; Ø10mm for W-C wall plugs, 60mm depth). Secure the wall plate (A) to the wall using screws (W-A) and wall plugs (W-C) if mounting into drywall. Ensure the wall plate is level.
Step 3: Hang TV on Wall Plate
Lift the TV with the attached brackets and hook them onto the wall plate. Ensure the safety latches engage.
Adjustments
If the display does not stop at your desired position, adjust the knobs as shown in the diagram.