Gembird TWS-02 True Wireless Stereo Earbuds
User Manual
General Information
This product is manufactured by or on behalf of Gembird Europe B.V. Inquiries regarding product compliance in Europe should be sent to: Gembird Europe B.V., Wittevrouwen 56, 1358 CD, Almere, The Netherlands. Visit www.gmb.nl for more information.
Warranty conditions are available at: www.gmb.nl/warranty
For product support, visit www.gmb.nl/service or contact helpdesk@gembird.nl.
Safety Warning: Please follow the safety advice provided in the manual to ensure safe handling of the product. This includes information on proper disposal and handling of batteries.
Features
- BT TWS in-ear earbuds
- Up to 6 hours of listening time on a single charge
- The storage case provides an additional 30 hours of listening time
- Automatically mutes music for incoming calls
- LED status indicator
Specifications
- Interface: BT v.5
- BT frequency range: 2402 MHz ... 2480 MHz
- RF output power: 4 dBm
- Supported profiles: HSP, HFP, A2DP and AVRCP
- Recharging time: Up to 1 hour (USB Type-C port)
- Operation distance: Up to 10 meters in the open air
- Speaker frequency response: 20 Hz - 20000 Hz
- Battery: Case 300 mAh; Earbuds internal 30 mAh x 2 pcs, Li-Polymer
- Net weight (whole set): 27 g
Product Operation
Step 1: Power On/Pairing
Place the earbuds in the charging case. The LED indicators on the earbuds will light up, indicating they are charging. To power on and initiate pairing, remove the earbuds from the case. The earbuds will automatically power on and enter pairing mode.
Step 2: Connect to Device
On your smartphone or other Bluetooth-enabled device, navigate to the Bluetooth settings. Turn on Bluetooth and search for available devices. Select "TWS-02" from the list of available devices to connect.
Step 3: Controls and Functions
- Incoming Call: Short press the touch control on either earbud to answer or end a call.
- Music Playback:
- Play/Pause: Short press the touch control on either earbud.
- Next Track: Double press the touch control on the right earbud.
- Previous Track: Double press the touch control on the left earbud.
- Volume Up: Press and hold the touch control on the right earbud for more than 2 seconds.
- Volume Down: Press and hold the touch control on the left earbud for more than 2 seconds.
Charging the Earbuds
Place the earbuds in the charging case. Connect the charging case to a power source using the provided USB Type-C cable. The LED indicator on the case will show the charging status. A full charge takes approximately 1 hour.
Declaration of Conformity
Gembird Europe B.V. declares that this equipment is in compliance with Directive 2014/53/EU (RED). The full text of the EU declaration of conformity is available at: www.gmb.nl/certificates
Waste Disposal
The symbol of the crossed-out wheeled bin indicates that this appliance must not be disposed of with household waste. Consumers are legally required to hand in batteries and the appliance at designated collection points. Please delete all personal data before returning the appliance. Remove batteries and lamps before disposal and dispose of them separately.