Gembird WM-90ST-01 Full-Motion TV Wall Mount
This document provides instructions for the Gembird WM-90ST-01 full-motion TV wall mount.
General Information
Manufactured by or on behalf of Gembird Europe B.V. Inquiries regarding product compliance in Europe should be sent to: Gembird Europe B.V., Wittevrouwen 56, 1358 CD, Almere, The Netherlands. Visit www.gmb.nl for more information.
Warranty conditions: www.gmb.nl/warranty
Product support: www.gmb.nl/service and/or helpdesk@gembird.nl
Safety Information
For safe handling of the product, please follow the safety advice provided on www.gmb.nl/safety. This advice is available in multiple languages including English (ENG), German (DE/AT), Dutch (NL/BE), Spanish (ES), Czech (CZ), French (FR/BE), Italian (IT), Portuguese (PT), Polish (PL), Romanian (RO), Slovak (SK), Slovenian (SL), Croatian (HR), Hungarian (HU), and Bulgarian (BG).
Product Specifications
- Model: WM-90ST-01
- Type: Full-motion TV wall mount
- Supported Screen Size: 37" - 90"
- Maximum Weight Capacity: 50 kg
- Maximum VESA Mounting: 600x400 mm
Installation Guide
The following steps outline the installation process. Please refer to the diagrams for visual guidance.
Step 1: Prepare the Wall Mount Arms
Attach the wall mount arms (D) to the main bracket (A) using the 4mm Allen key (I). Loosen the two screws on the mount by 1 turn appropriately. Ensure the arms are securely attached for subsequent installation.
Step 2: Attach Mounting Plates to TV
Select the appropriate screws (M-A, M-B, M-C, M-D) and spacers (M-E, M-F, M-G, W-C) for your TV. Attach the mounting plates (C) to the back of your TV using the provided screws and spacers. Ensure the correct screw length is used (Too Long or Too Short are indicated as incorrect). Tighten the screws securely.
Step 3: Mount the Bracket to the Wall
Choose the appropriate wall mounting hardware (W-A, W-B) based on your wall type. Drill holes in the wall according to the required spacing (e.g., 90mm or 95mm). Securely attach the wall bracket (A) to the wall using the selected hardware. Ensure the bracket is level.
Step 4: Hang the TV on the Wall Mount
Lift the TV with the attached mounting plates and hang it onto the wall mount arms. Ensure the safety hooks engage to prevent the TV from falling.
Step 5: Adjust and Secure the TV
Loosen the screws (F) on the arms as shown in the diagram. Adjust the TV to the desired angle. Once the angle is set, tighten the screws and handle to secure the TV in place.
Step 6: Cable Management
Use the provided cable ties (F) to manage and secure the cables connected to the TV.
Note: Ensure all screws are tightened appropriately throughout the installation process.
Parts List
- A (x1): Main Bracket
- B (x1): Cable Management Cover
- C (x2): Mounting Plates
- D (x2): Wall Mount Arms
- E (x1): Spacer Block
- F (x3): Cable Ties
- G (x2): M6x10 Screws
- H (x2): M5x10 Screws
- I (x1): 4mm Allen Key
- J (x1): 10-13mm Wrench
- M-A (x4): M6x14 Screws
- M-B (x4): M8x16 Screws
- M-C (x4): M6x30 Screws
- M-D (x4): M8x35 Screws
- M-E (x4): D8 Spacers
- M-F (x4): Ø15x28x5 Spacers
- M-G (x4): Ø15x28x5 Spacers
- W-A (x4): ST8.0x90 Screws
- W-B (x4): Ø12x60 Wall Anchors
- W-C (x4): D8 Washers