Fanatec ClubSport BMW M3 GT2 QuickGuide

Tuning Options

To enter the Tuning Menu, press the Tuning button. To navigate within the menu, use the right FunkySwitch™. Press it up or down to access 5 setup profiles. Rotate the FunkySwitch™ to change option values.

Centre Calibration

If centre calibration is required (e.g., after a firmware update of the ClubSport Wheel Base), press the Tuning Menu Button to enter the Tuning Menu. When the Tuning Menu is active, simultaneously press the analogue stick and the FunkySwitch™ to calibrate the wheel centre. This is illustrated in the diagram.

Diagram shows a steering wheel with callouts pointing to the Tuning Button and FunkySwitch, indicating their use for centre calibration.

Shifter Calibration

To enter shifter calibration mode, simultaneously press the Tuning Menu Button and the button highlighted below.

Diagram shows a steering wheel with callouts pointing to the Tuning Button and another button (labeled with a red circle) for shifter calibration.

Attaching the Steering Wheel

Remove the storage pin.
Align the ClubSport Wheel Base axle to the correct position.
Compress and hold the Quick Release mechanism.
Slide the steering wheel onto the ClubSport Wheel Base axle.
Release the Quick Release mechanism.

Diagrams illustrate each step of attaching the steering wheel, showing the removal of a pin, alignment, compression of the quick release, sliding onto the axle, and releasing the mechanism.

Detaching the Steering Wheel

Compress and hold the Quick Release mechanism.
Slide the steering wheel off the ClubSport Wheel Base axle.
Place the rim face down on a table.
Insert the storage pin.
Release the Quick Release mechanism.

Diagrams illustrate each step of detaching the steering wheel, showing the compression of the quick release, sliding off the axle, placing the rim down, inserting the pin, and releasing the mechanism.

Modes

To switch between modes, simultaneously press and hold the two buttons highlighted below for one second. The wheel base LED indicates the active mode:

Red indicates PC mode.
Blue indicates PS4™ mode*.
Purple indicates compatibility mode*.

* Not applicable for every Fanatec wheel base. Please check the individual user manual of your Fanatec wheel base.

Diagram shows a steering wheel with callouts pointing to two buttons (labeled with red circles) used for switching modes.

Button Mapping

The table below details the button mapping for the steering wheel:

R2 L2 R1 L1 L3 R3 Touch Pad X

Button	Function	PC	PS4
7	1	A
8	4
6	Joy +	GSB 2*
12	+26	O
11	D-Pad +	25
9	x	O
Button		3
		2
	Options	10

* Game Specific Button

Diagram shows a steering wheel with numbered buttons and their corresponding functions, including the Tuning Button, FunkySwitch, and Touch Pad.

Fanatec® is a registered trademark of Endor AG. Designed and developed by Endor AG in Germany. Contact information for Endor AG is provided.

Website: www.fanatec.com - www.endor.ag

	Fanatec ClubSport Steering Wheel F1 2020 Quick Guide A quick guide to attaching, detaching, and upgrading the Fanatec ClubSport Steering Wheel F1 2020, including calibration, modes, and button mapping.
	Fanatec ClubSport Steering Wheel Formula V2.5 Quick Guide A quick guide to the Fanatec ClubSport Steering Wheel Formula V2.5, covering package contents, setup, calibration, tuning options, modes, button mapping, support, and video resources.
	Fanatec ClubSport BMW M3 GT2 V2 Quick Start Guide A concise guide to setting up and calibrating the Fanatec ClubSport BMW M3 GT2 V2 racing steering wheel for PC and PlayStation, covering package contents, quick release attachment, centre and shifter calibration, modes, tuning options, and button mapping.
	Fanatec ClubSport Porsche 918 RSR Quick Guide A quick guide to the Fanatec ClubSport Porsche 918 RSR steering wheel, covering modes, tuning options, button mapping, calibration, and attachment/detachment.
	Fanatec ClubSport Steering Wheel F1® 2023 Quick Guide Quick guide for setting up and using the Fanatec ClubSport Steering Wheel F1® 2023, covering package contents, firmware updates, calibration, modes, and button mapping.
	Fanatec Podium Steering Wheel BMW M4 GT3 Quick Start Guide Comprehensive guide to setting up, calibrating, and customizing the Fanatec Podium Steering Wheel BMW M4 GT3 for PC and PlayStation gaming, including firmware updates and button mapping.
	Fanatec CSL Universal Hub Quick Guide A concise guide to installing, adjusting, and using the Fanatec CSL Universal Hub, covering package contents, compatibility, width adjustment, attachment, detachment, modes, calibration, button mapping, and support resources.
	Fanatec Podium Button Module Endurance Quick Guide A concise guide detailing the package contents, installation, calibration, and button mapping for the Fanatec Podium Button Module Endurance, a high-performance sim racing accessory.