Fanatec ClubSport Steering Wheel F1® 2023 Quick Guide
Package Content
This section details the items included in the ClubSport Steering Wheel F1® 2023 package.
- 1x ClubSport Steering Wheel F1® 2023
- 1x Racing Style Button Caps
A visual representation of the items included in the package: the steering wheel and button caps.
Getting Started
Follow these steps to begin using your new steering wheel:
- Watch the video guide for setup: https://fanatec.com/QR/CS-F-V2.5-23
- Download the latest drivers and software: https://fanatec.com/driver
- Refer to the full product manual for comprehensive details: https://fanatec.com/QR/QR-WS
- Access the Advanced Podium Module (APM) guide if applicable: https://fanatec.com/QR/P-APM
Visual cues and QR codes directing users to video tutorials, driver downloads, and the full product manual.
Firmware Update
Keeping your steering wheel's firmware up-to-date ensures optimal performance and access to the latest features.
- Connect the steering wheel to your PC or compatible console.
- Ensure you have the latest Fanatec drivers installed.
- Follow the on-screen instructions provided by the firmware update software. This typically involves initiating the update and waiting for it to complete.
A step-by-step illustration of connecting the steering wheel to a device and initiating the firmware update process.
Centre Calibration
Calibrate the center position of the steering wheel for accurate steering input in games.
- Turn the steering wheel fully to the left.
- Turn the steering wheel fully to the right.
- Press the Tuning Menu button (often indicated by 'CAL' or a gear icon) to enter calibration mode.
- Follow any on-screen prompts or indicators on the Wheel Base to confirm the center position.
Illustrations demonstrating the physical actions required to calibrate the steering wheel's center point, typically involving full left and right turns and a button press.
Modes
The steering wheel supports various operational modes, which may vary depending on the connected Fanatec Wheel Base.
- Enter Tuning Menu: Press the designated Tuning Menu button.
- Exit Tuning Menu: Press the Tuning Menu button again or follow on-screen prompts.
- Repeat: Some functions may require repeating an action.
- Wheel Base Dependent: Mode functionality can differ based on the specific Fanatec Wheel Base used.
Diagrams explaining how to navigate and select different operational modes for the steering wheel, often linked to specific Wheel Base features.
Tuning Options
Access and adjust various settings and parameters through the Tuning Menu for personalized control.
- Enter Tuning Menu: Press the Tuning Menu button.
- Exit Tuning Menu: Press the Tuning Menu button again or follow on-screen prompts.
Visual guides on accessing and interacting with the steering wheel's tuning menu for customization.
Shifter Calibration
Calibrate your shifter (if connected and compatible) for precise gear engagement.
- Ensure the shifter is in neutral (N).
- Press and hold the designated button (e.g., 'LOW RIGHT BTN') while the shifter is in neutral.
- Follow on-screen or Wheel Base prompts to complete the calibration process.
Visual steps for calibrating the gear shifter, usually involving placing it in neutral and pressing specific buttons.
Button Mapping
Map the steering wheel's buttons to game functions for both PC and PlayStation platforms. Note that some buttons may be designated as Game-Specific Buttons (GSB) and their functions are determined by the game.
| # | PC | PlayStation® |
|---|---|---|
| 1 | Up, Down, Left, Right, Press - 25 | Up, Down, Left, Right, Press - *GSB 1 |
| 2 | Rotate Left - 23 / Right - 24 | Rotate Left - *GSB 2 / Right - *GSB 3 |
| 3 | Joystick | Joystick |
| 4 | 26 (Press) | GSB 4* |
| 5 | PS | PS |
| 6 | SHARE / CREATE | SHARE / CREATE |
| 7 | OPTIONS | OPTIONS |
| 8 | R3 | R3 |
| 9 | 27 (Rotate - CW) / 21 (Rotate - CCW) | GSB 5* / GSB 6* |
| 10 | L2 | L2 |
| 11 | L3 | L3 |
| 12 | R2 | R2 |
| 13 | 34 (Up) / 32 (Down) | GSB 7* / GSB 8* |
| 14 | 33 (Up) / 31 (Down) | GSB 9* / GSB 10* |
| 15 | Cross | Cross |
| 16 | 36 (Rotate - CW) / 35 (Rotate - CCW) | GSB 11* / GSB 12* |
| 17 | Circle | Circle |
| 18 | 3 | Triangle |
| 19 | 4 | Square |
| 20 | 61 | GSB 13* |
| 21 | 62 | GSB 14* |
| 22 | L1 | L1 |
| 23 | 5 | R1 |
| 24 | R1 | R1 |
| 25 | Analogue Paddles: A = Clutch Bite Point, B = Handbrake + Clutch, C = Brake + Throttle, D = Mappable Analogue Axes (See Video Guide) | Analogue Paddles: A = Clutch Bite Point, B = Handbrake + Clutch, C = Brake + Throttle, D = Mappable Analogue Axes (See Video Guide) |
| 26 | ENC: 37 / 38, MPS Pulse / Constant: 37 - 48 | GSB 15 / 17* GSB 15 - 27* |
| 27 | ENC: 49 / 50, MPS Pulse / Constant: 49 - 60 | GSB 27 / 28* GSB 27 - 38* |
A detailed schematic of the steering wheel, labeling each button and control with its corresponding function for PC and PlayStation gaming platforms.
Support and Compliance
For technical assistance and product information, please refer to the following resources:
- Support & FAQs: https://fanatec.com/support/faq
- Fanatec App: https://fanatec.com/app
Warranty Information: The product warranty is provided by Endor AG. Please consult the included warranty sheet and the terms & conditions of Endor AG available on fanatec.com.
FCC Compliance: This device adheres to part 15 of the FCC rules. Its operation is contingent upon two conditions: it must not cause harmful interference, and it must accept any interference received. Modifications not explicitly detailed in this user manual may result in the cessation of the device's operation.
China RoHS 2: This product complies with China RoHS 2 regulations concerning the restriction of hazardous substances in electrical and electronic products. The designated Environmental Protection Use Period (EPUP) for this product is 10 years.
China RoHS 2 Table:
| Part Name | Hazardous Substances | |||||
|---|---|---|---|---|---|---|
| Pb | Hg | Cd | Cr6+ | PBB | PBDE | |
| Cable/Adaptor | O | O | O | O | O | O |
| Plastic | O | O | O | O | O | O |
| Metal parts | X | O | O | O | O | O |
| Other enclosure components | O | O | O | O | O | O |
| PCBA | O | O | O | O | O | O |
Key for RoHS Table:
- O: Indicates that the hazardous substance content in all homogeneous materials for this part is below the limit requirement (GB/T 26572).
- X: Indicates that the hazardous substance content in at least one homogeneous material for this part is above the limit requirement (GB/T 26572).
Manufacturer:
Fanatec® is a registered trademark of Endor AG. Designed and developed by Endor AG in Germany.
Distribution and Contact:
Manufactured and distributed by Endor AG, E.ON-Allee 3 - 84036 Landshut - Germany.
Contact Information:
- EU/US/Canada/Australia: 00800 0 FANATEC or +49 (871) 9221-122
- Japan: +81 306 7172-719
- Email: info.webshop@fanatec.com
- Website: www.fanatec.com, www.endor.ag
Importers:
- Endor America LLC: 8200 Wilshire Blvd. Suite 200 - Beverly Hills CA 90211 - USA. Telephone: +1 321-655-3524. Email: webshop@fanatec.com. Website: www.fanatec.com - www.endor.ag
- Endor Australia Pty Ltd: 3 Staley Street, California Gully, Vic, 3556 - Australia. Telephone: 661 453 979 40. Email: webshop@fanatec.com. Website: www.fanatec.com - www.endor.ag
- Endor Japan Kabushikigaisya: E5001 3-13-1, Harumi Cyuo-ku Tokyo-to, Tokyo 104-0053 - Japan. Telephone: 03-6717-2719. Email: webshop@fanatec.com. Website: www.fanatec.com - www.endor.ag
QR codes for accessing the Fanatec mobile app, support resources, and FAQs, alongside important regulatory and warranty information, and contact details for manufacturers and distributors.
Fanatec | Realistic Sim Racing Hardware
Fanatec | Realistic Sim Racing Hardware
Endor: Endor AG
Fanatec | Realistic Sim Racing Hardware
