OUKITEL G2 User Manual

Device Overview

Headphone Jack: Located at the top of the device.

Proximity Sensor: Situated near the front camera.

Front Camera: For selfies and video calls.

Touchscreen: The primary interface for interacting with the phone.

Speaker: For audio output.

Type-C Port: For charging and data transfer.

SIM Card Slot: For inserting SIM cards.

Customizable Key: A programmable button for quick access to functions.

Volume Buttons: For adjusting audio volume.

Power Button: For turning the device on/off and locking/unlocking the screen.

NFC: Near Field Communication for contactless transactions.

Rear Camera: For taking photos and videos.

Flash: Provides illumination for the rear camera.

Auxiliary Camera: Additional camera for enhanced photography.

Speaker Outlet: For audio output.

Accessories

• Fast Charger: For rapid battery replenishment.
• Type-C Cable: For charging and data transfer.
• SIM Card Ejector Tool: For opening the SIM card tray.

Battery

The mobile phone has a built-in battery. The battery status can be monitored via the icon displayed in the upper right corner of the screen.

Battery Capacity: 6300 mAh

Fast Charging: Supports quick charging capabilities.

Caution: Use only manufacturer-approved batteries specifically designed for your phone. Incompatible batteries may cause serious injury or damage to the phone. Never place batteries or phones on or inside heating devices such as microwave ovens, stoves, or radiators. Overheating of batteries can cause them to explode.

Inserting the SIM Card

1. Ensure the phone can make calls by inserting the SIM card in the correct order.
2. Insert the SIM card ejector tool into the side hole and press to eject the card tray.
3. Insert the card holder into the panel in the direction of the arrow.

Powering On the Device

The device is equipped with a built-in non-removable battery. Press and hold the power button for 3-5 seconds to power on the device.

Sending SMS, MMS

SMS:

• Open the SMS application.
• Select "New message".
• Enter the phone number or select from contacts.
• Select "Edit message" and enter the text.
• Tap "Send".

MMS-Video:

• When creating a text message, select images, videos, or other files you wish to add.
• Make your selection and send.

Language Settings

1. From the main menu, navigate to "System Settings".
2. Go to "Language and input method".
3. In the "Language and input method" menu, select "Language".
4. Choose "Add language" and select your desired language. The system will automatically return to the selected language interface.

SAR Information

The Specific Absorption Rate (SAR) of this product is less than 2.0 W/kg. This complies with national standards EN62209-1:2016; EN 62209-2:2010; EN 62479:2010; EN 50360:2017; EN 50566:2017.

Safety Precautions

• Keep the device at least 15 cm away from medical implants or pacemakers. Do not carry the device in your trouser pocket.
• Do not expose the device or its battery to high temperatures or heat-generating equipment, such as direct sunlight, heaters, microwave ovens, ovens, or water heaters. Overheating of the battery may cause it to explode.
• When charging is complete, disconnect the charger from the phone and unplug it from the outlet.
• If the device has a non-removable battery, do not attempt to replace it yourself to avoid damaging the battery or the device.
• Using an unauthorized or incompatible power source, charger, or battery may lead to fire, explosion, or other hazards.
• Do not disassemble, short-circuit, or immerse the battery in water or other liquids to prevent battery leakage, overheating, fire, or explosion.
• Do not drop, crush, scratch, or puncture the battery, as excessive external pressure may cause internal short-circuiting and battery overheating.
• The company is not responsible for accidents caused by non-standard accompanying charging equipment.
• For full CE compliance information, please visit: http://www.oukitel.com
• Be cautious with headphones; excessive sound pressure from headphones can cause hearing loss.
• CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
• The product can only be connected to a USB interface of version 2.0.
• The adapter should be installed near the equipment and be easily accessible.
• RF Compliance: The device complies with radio frequency specifications when used at a distance of at least 10 mm from your body.
• Operating Temperature: -20°C to +55°C.

Technical Maintenance

• Familiarize yourself with the care and maintenance information for this phone to use it more safely and effectively, and to maximize its service life.
• For opening the device, disassembling accessories, etc., follow the instructions in this manual and do not attempt to use other instructions.
• Do not drop, knock, or shake the device. Careless handling may lead to screen breakage, internal board damage, etc.
• Do not use chemical solvents or detergents to clean the device. Wipe the casing with a soft cotton cloth dampened with water and mild soap.
• Clean the camera and display with a clean, dry, soft cloth.
• When the charger is not in use, unplug it from the outlet. Do not connect a fully charged battery to the charger for an extended period, as overcharging will shorten the battery's service life.

FCC Compliance:

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Any changes or modifications not approved by the manufacturer may void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Specific Absorption Rate (SAR) Information:

This mobile phone complies with government requirements for radio wave exposure. The guidelines are based on standards developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial margin of safety designed to assure the safety of all persons, regardless of age or health status, using accessories that maintain a 10 mm distance between the user's body and the handset. Belt clips, holsters, and similar accessories should not contain metallic components.

Use only the antenna supplied with the equipment or an approved antenna. FCC ID: 2ANMU-WP28

Manufacturer Information

Manufacturer: SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO., LTD.

Address: 202, Building A2, Silicon Valley Power Intelligent Terminal Industrial Park, No. 20, Dafu Industrial Zone, Kukeng Community, Guanlan Street, Longhua District, Shenzhen, China.

Importer in Ukraine: LLC "KOMEL", Ukraine, 03117, Kyiv, Berešteyskyi Ave., 67, building L.

Website: www.oukitel.com