OUKITEL WP32 User Manual

Product Overview

This document provides a comprehensive user manual for the OUKITEL WP32 mobile phone. It covers essential information for safe and effective use, including accessories, battery care, device operation, and maintenance.

Accessories

The OUKITEL WP32 comes with the following accessories:

• Fast charger
• Type-C cable
• SIM card ejector tool

Battery

The mobile phone has a built-in battery. The battery status can be monitored via the icon displayed in the upper right corner of the screen.

Battery Capacity: 6300 mAh

Fast Charging: 10W

Important Safety Notice: Use only manufacturer-approved batteries specifically designed for your phone. Incompatible batteries may cause serious injury or damage to the phone. Never place batteries or phones on or near heating devices such as microwave ovens, stoves, or radiators. Overheating batteries may explode.

Device Layout

Front View:

• Headphone jack
• Light sensor
• Front camera
• Touchscreen
• Speaker
• TYPE-C port

Rear View:

• Auxiliary camera
• Main rear camera
• Flash
• SIM card slot
• Customizable key
• Volume up/down buttons
• Power button
• NFC
• Speaker grille

How to Insert SIM Card

1. Ensure the phone can make calls. Insert the SIM card in the correct order.
2. Use the SIM ejector tool to press the hole on the side to eject the card tray.
3. Insert the card holder into the panel in the direction of the arrow.

How to Start Up the Device

The device has a built-in non-removable battery. Press and hold the power button for 3-5 seconds to start up the device.

How to Send SMS, MMS

SMS

• Open the SMS application.
• Select "New message".
• Enter the phone number or select from contacts.
• Select "Edit message" and enter the text.
• Send.

MMS

When creating a text message, select images, videos, or other files you want to add. Select and send.

Language Settings

To change the language:

1. From the main menu, navigate to "System Settings".
2. Go to "Language and input method".
3. Select "Language", then choose "Add language".
4. Select your desired language. The system will automatically switch to the selected language interface.

SAR Information

The maximum specific absorption rate (SAR) for this product is <2.0 W/kg. This complies with national standards EN62209-1:2016; EN 62209-2:2010; EN 62479:2010; EN 50360:2017; EN 50566:2017.

Safety Precautions

To ensure safe usage of the product, strictly adhere to the following:

• Keep the device at least 15 cm away from medical implants or pacemakers. Do not carry the device in your coat pocket.
• Do not expose the device or its battery to high temperatures or heat-generating equipment, such as direct sunlight, heaters, microwave ovens, ovens, or water heaters. Overheating the battery may cause it to explode.
• When charging is complete, disconnect the charger from the phone and unplug it from the outlet.
• If the device has a non-removable battery, do not attempt to replace it yourself to avoid damaging the battery or the device.
• Using an unauthorized or incompatible power source, charger, or battery may lead to fire, explosion, or other hazards.
• Do not disassemble or restart the battery, insert foreign objects, immerse it in water or other liquids, to avoid battery leakage, overheating, fire, or explosion.
• Do not drop, crush, scratch, or puncture the battery to avoid excessive external pressure, which may lead to internal short circuits and battery overheating.
• The company is not responsible for accidents caused by non-standard accompanying charging equipment.
• For full CE compliance information, please visit: http://www.oukitel.com
• Be cautious with headphones; excessive sound pressure from headphones can cause hearing loss.
• CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
• The product can only be connected to a USB interface of version 2.0.
• The adapter should be installed near the equipment and be easily accessible.
• RF compliance: the device complies with RF specifications when used at a distance of at least 10 mm from your body.
• Operating temperature: -10°C to +40°C.

Technical Maintenance

Carefully read the information on care and maintenance of this phone to use it more safely and effectively, and to maximize its service life.

• For opening the device, disassembling accessories, etc., follow the instructions in the manual and do not attempt to use other instructions.
• Do not drop, knock, or shake the device. Careless handling may result in screen breakage, damage to the internal board, etc.
• Do not use chemical solvents or detergents to clean the device. Wipe the case with a soft cotton cloth dampened with water and mild soap.
• Clean the camera and display with a clean, dry, soft cloth.
• When the charger is not in use, disconnect it from the outlet. Do not connect a fully charged battery to the charger for a long time, as overcharging will shorten the battery life.

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Any changes or modifications not approved by the manufacturer may void the user's right to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful radio communications interference.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio technician for help.

Manufacturer Information

Manufacturer: SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO., LTD.

Address: 202, Building A2, Silicon Valley Power Intelligent Terminal Industrial Park, No. 20, Dafu Industrial Zone, Kukeng Community, Guanlan Street, Longhua District, Shenzhen, China.

Importer in Ukraine: LLC "KOMEL", Ukraine, 03117, Kyiv, Bereosteyskyi Ave, 67, building L