OUKITEL C36 User Manual

Accessories

The OUKITEL C36 comes with the following accessories:

• Quick Charger
• TYPE-C Cable
• Leather case
• SIM card pin

Battery

The C36 features an internal battery with a capacity of 5150 mAh. The battery status can be monitored via the icon on the top right of the screen.

Warning:

• Use only OUKITEL-approved batteries designed for this phone.
• Incompatible batteries may cause serious injury or damage to the phone.
• Never place batteries or phones on or in heating devices like microwave ovens, stoves, or radiators, as overheating can cause explosions.

Charging information: 10W Schnellladung

Device Overview

The C36 features:

• Front camera
• Light Sensing + Distance Sensing Receiver
• Main camera
• Flash
• Sub camera
• Volume buttons (+/-)
• Power key with Fingerprint Scanner
• Headphone jack
• Horn hole
• MIC hole
• TYPE-C interface

How to insert the card

To ensure your phone can make calls, insert the SIM card as follows:

1. Insert the ejector pin into the hole on the side of the phone to pop out the card tray.
2. With the phone facing up, insert the SIM card(s) and TF card into the cardholder in the direction of the arrow.

The phone supports dual SIM cards and a TF card.

How to boot

With the non-removable battery, press the power button for 3-5 seconds to boot the device.

How to send SMS, MMS

SMS

1. Open the SMS app.
2. Select 'New Information'.
3. Enter a phone number or browse your contacts.
4. Select 'Edit Information', enter your text.
5. Send.

MMS-video

• When writing a text message, you can select images, videos, or other files to add.
• You can also take a new picture or video directly.
• Select 'Send'.

Language switching settings

1. Navigate to Main menu > Settings > System > Language and input method.
2. Select 'Language and input method' > 'Language' > 'Language adding'.
3. Select your desired language. The system will automatically switch.
4. To set it as primary, select the icon next to the language bar and drag it to the first position.

SAR (Specific Absorption Rate)

The maximum electromagnetic radiation absorption ratio (SAR) of this product is ≤2.0W/kg, in line with national standards.

Relevant standards include: EN62209-1:2016, EN 62209-2:2010, EN 62479:2010, EN 50360:2017, EN 50566:2017.

The highest reported SAR level for body-worn usage (10mm) is 0.565 W/kg. Body simultaneous transmission is 0.923 W/kg. Head SAR is 1.006 W/kg and Head simultaneous transmission is 1.453 W/kg. Hotspot SAR is 0.573 W/kg and Hotspot simultaneous transmission is 0.892 W/kg.

Safety

To ensure safety during use, strictly abide by the following rules:

• Keep the device at least 15cm away from medical implants or rhythm adjusters. Do not place the device in your coat pocket.
• Do not expose the device or batteries to high temperatures or heat-generating equipment (sunlight, heaters, microwave ovens, etc.). Overheating can cause explosions.
• Disconnect the charger when charging is complete or not in use.
• Do not attempt to replace the battery yourself if it is non-removable, as this may damage the battery or device.
• Use only approved power sources, chargers, and batteries to avoid fire, explosion, or other hazards.
• Do not disassemble, reset, puncture, or immerse the battery in water or other liquids to prevent leakage, overheating, fire, or explosion.
• Avoid dropping, crushing, or scratching the battery to prevent internal short-circuit and overheating.
• The company is not responsible for accidents caused by non-standard charging equipment.

For full CE compliance information, visit: http://www.oukitel.com

Maintenance

• Understand the maintenance procedures to use the phone safely and extend its service life.
• Follow manual instructions for opening the phone and disassembling accessories. Do not attempt other methods.
• Avoid dropping, knocking, or shaking the phone. Rough handling can cause screen rupture or damage internal components.
• Do not use chemical solvents or detergents. Clean the phone case with a soft cotton cloth dampened with water and mild soap.
• Clean lenses (e.g., camera lens) and the display with a clean, dry, soft cloth.
• Unplug the charger from the power outlet when not in use. Avoid prolonged charging of a fully charged battery, as it shortens battery life.

Standard package includes: Phone, Manual, Protective film, Protective case, Headset, USB data cable, OTG cable, Charger.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

FCC/IC RF Radiation Exposure and SAR Statements

The Smart Phone C36 has been tested for body-worn Specific Absorption Rate (SAR) compliance. The FCC/IC has established detailed SAR requirements. RF Exposure Information: The radio module has been evaluated under FCC Bulletin C95.1 and IEEE 1528 and found to be compliant with RF Exposure from radio frequency devices. This model meets the applicable government requirements for exposure to radio frequency waves.