OUKITEL WP28 User Manual

Accessories

The OUKITEL WP28 comes with the following accessories:

• Fast charger
• Type-C Cable
• User Manual
• Warranty Card

Battery

The mobile phone has a built-in battery. You can monitor the battery status via the icon in the upper right corner of the screen.

• Battery Capacity: 10600 mAh
• Fast Charging: 18W

Attention: Use only manufacturer-approved batteries specifically designed for your phone. Incompatible batteries may cause serious injury or damage to the phone. Never place batteries or phones on or inside heating devices such as microwave ovens, stoves, or radiators. Overheating batteries may explode.

Device Overview

The OUKITEL WP28 features the following components:

• Front: Light sensor, Speaker, Front camera, Volume Up button, Volume Down button, Power button, Touchscreen.
• Bottom: Type-C Port, Microphone.
• Side: SIM card slot.
• Back: Main camera, Flash, Ventilation hole.

How to Insert SIM Card

1. Ensure the phone can make calls, insert the SIM card in the following order.
2. Insert the pin into the side hole to eject the card tray.
3. Insert the card holder into the panel in the direction of the arrow.

How to Start the Device

The device has a built-in non-removable battery. Press and hold the power button for 3-5 seconds to start the device.

How to Send SMS, MMS

SMS

• Open the SMS app.
• Select "New message".
• Enter the phone number or select from your contacts.
• Select "Edit message" and enter the text.
• Send.

MMS

When creating a text message, select images, videos, or other files you want to add. Select and send.

Language Settings

From the main menu, navigate to "System Settings", then "Language & input method". In the "Language & input method" menu, select "Language", then "Add language". Select the desired language, and the system will automatically switch to the language interface.

SAR Information

The maximum specific absorption rate (SAR) for this product is <2.0 W/kg. This complies with national standards EN62209-1:2016; EN 62209-2:2010; EN 62479:2010; EN 50360:2017; EN 50566:2017.

Safety

To ensure safe and effective use of the product, strictly adhere to the following:

• Keep the device at least 15 cm away from any medical implant or cardiac pacemaker. Never put the device in a shirt pocket.
• Do not expose the device or batteries to high temperatures or heat-generating equipment, such as sunlight, heaters, microwave ovens, ovens, or water heaters. Battery overheating may cause an explosion.
• When charging is complete, disconnect the charger from the phone and unplug it from the outlet.
• If the device has a non-removable battery, do not attempt to replace the battery yourself to avoid damaging the battery or the device.
• Using an unauthorized or incompatible power source, charger, or battery may cause fire, explosion, or other hazards.
• Do not disassemble or restart the battery, insert other objects, immerse in water or other liquids to avoid battery leakage, overheating, fire, or explosion.
• Do not drop, crush, scratch, or puncture the battery to avoid excessive external pressure, which may lead to internal short-circuiting and battery overheating.

The company is not responsible for accidents caused by non-standard accompanying charging equipment.

For full CE compliance information, please visit: http://www.oukitel.com

Maintenance

Familiarize yourself with the care and maintenance information for this phone to use it more safely and effectively, and to maximize its service life.

• For opening the device, disassembling accessories, etc., follow the instructions in the manual and do not attempt to use other instructions.
• Do not drop, hit, or shake the device. Careless handling may lead to screen breakage, internal board damage, etc.
• Do not use chemical solvents or detergents to clean the device. Wipe the body with a soft cotton cloth dampened with water and mild soap.
• Clean the camera and display with a clean, dry, soft cloth.
• When the charger is not in use, unplug it from the outlet. Do not connect a fully charged battery to the charger for an extended period, as overcharging will shorten the battery life.

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Any changes or modifications not approved by the manufacturer may void the user's right to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Information on Specific Absorption Rate (SAR):

This mobile phone complies with government requirements for radio wave exposure. The guidelines are based on standards developed by independent scientific organizations through periodic and thorough evaluation of scientific research. The standards include a significant safety margin designed to ensure the safety of all persons, regardless of age or health status, using accessories that provide a distance of 10 mm between the user's body and the handset. Belt clips, holsters, and similar accessories should not contain metallic components.

Use only the antenna supplied with the equipment or an approved one. FCC ID: 2ANMU-WP28

• Caution: Be careful with headphones; excessive sound pressure from headphones can cause hearing loss.
• Caution: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
• The product can only be connected to a USB interface of version 2.0 or higher.
• The adapter should be installed near the equipment and be easily accessible.
• Radio frequency compliance: the device complies with radio frequency specifications when used at a distance of at least 10 mm from your body.

Operating temperature: -20°C to +55°C.

Manufacturer: SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO., LTD. Address: 202, Building A2, Silicon Valley Power Intelligent Terminal Industrial Park, No. 20, Dafu Industrial Zone, Kukeng Community, Guanlan Street, Longhua District, Shenzhen, China.

Manufacturer (Ukrainian): ШЕНЖЕН ЮНДЖІ ІНТЕЛЛІГЕНТ ТЕКНОЛОДЖІ СО., ЛТД. Address: 202, Building A2, Silicon Valley Power Intelligent Terminal Industrial Park, No. 20, Dafu Industrial Zone, Kukeng Community, Guanlan Street, Longhua District, Shenzhen, China.

Importer in Ukraine: LLC "KOMEL", Ukraine, 03117, Kyiv, Bereстейський Ave, 67, building L.