OUKITEL WP28 User Manual

Manufacturer Information

Manufacturer Name: Shenzhen YunJi Intelligent Technology CO., LTD

Manufacturer Address: A-side A2 Building 2/F Enet New Industrial Park, No.20 Dafu Industrial Zone, Aobei Community, GuanLan, LongHua New District, Shenzhen China

Website: oukitel.com

Product Overview: OUKITEL WP28

This document serves as the user manual for the OUKITEL WP28 smartphone.

Device Components

A diagram illustrates the front of the OUKITEL WP28 smartphone, labeling the following components:

• Light sensor
• Receiver
• Front camera
• Volume + button
• Volume - button
• Off button
• Touch screen
• MIC (microphone)
• Type-c port

Diagrams also show the sides and rear of the device, indicating:

• SIM Card slot
• Flash
• Macro Camera
• Rear main camera
• Vent Hole
• Fingerprint sensor

Included Accessories

The package includes:

• Quick Charger
• USB Type-C Cable
• User Manual
• Warranty Card

Battery Information

The OUKITEL WP28 features an internal battery with a capacity of 10600 mAh. Battery status can be monitored via an icon on the top right of the screen. The device supports 15W Fast Charging.

Battery Warnings

• Use only OUKITEL-approved batteries designed for this phone.
• Incompatible batteries can cause serious injury or damage.
• Never place batteries or phones near heating devices like microwaves, ovens, stoves, or radiators, as overheating can cause explosions.

Getting Started

How to Boot the Device

With its non-removable battery, press and hold the power button for 3-5 seconds to boot the device.

SIM Card Insertion

To enable calling functionality, insert the SIM card as follows:

1. Insert and press the ejector pin into the side hole to pop out the card tray.
2. With the phone facing up, insert the cardholder into the phone in the direction of the arrow.

Sending SMS and MMS

SMS:

• Open the SMS app.
• Select 'New Information'.
• Enter a phone number or browse contacts.
• Select 'Edit Information' and enter your text.
• Tap 'Send'.

MMS-video:

• When writing a text message, select images, videos, or other files to add. You can also take a new picture or video instantly.
• Select or Send.

Language Switching Settings

• Navigate to Main menu > Settings > System > Language and input method.
• Select 'Language and input method' > 'Language' > 'Add language'.
• Choose your desired language. The system will automatically return to the language interface.
• Select the icon next to the language bar and drag it to the first position.

SAR (Specific Absorption Rate)

The maximum electromagnetic radiation absorption rate (SAR) for this product is ≤2.0W/kg.

This complies with national standard requirements:

• EN62209-1:2016
• EN 62209-2:2010
• EN 62479:2010
• EN 50360:2017
• EN 50566:2017

Safety Information

To ensure safe usage of the product, strictly adhere to the following rules:

• Keep the device at least 15cm away from medical implants or rhythm adjusters. Never place the device in your coat pocket.
• Do not expose the device and other batteries to high temperatures or heat-generating equipment (sunlight, heaters, microwave ovens, ovens, water heaters). Overheating can cause explosions.
• When charging is complete or not charging, disconnect the charger from the device and unplug the charger from the outlet.
• If the device has a non-removable battery, do not attempt to replace it yourself to avoid damaging the battery or device.
• Using unapproved or incompatible power sources, chargers, or batteries may lead to fire, explosion, or other hazards.
• Do not disassemble, reset, insert foreign objects into, or immerse the battery in water or other liquids to prevent leakage, overheating, fire, or explosion.
• Do not drop, crush, scratch, or puncture the battery to avoid excessive external pressure, which can cause internal short-circuit and overheating.
• The company is not responsible for accidents caused by non-standard charging equipment.

For full CE compliance information, visit: http://www.oukitel.com

Maintenance

Understand the maintenance procedures to use the device more safely and effectively, extending its service life.

• Follow manual instructions for opening the device and disassembling accessories. Do not attempt other methods.
• Avoid dropping, knocking, or shaking the device. Rough handling can crack the screen and damage internal components.
• Do not use chemical solvents or detergents for cleaning. Wipe the device case with a soft cotton cloth dampened with water and mild soap.
• Clean the lens (e.g., camera lens) and display with a clean, dry, soft cloth.
• Troubleshooting Abnormal Images/Crashes:
• For devices with non-removable batteries: Press and hold the power button for at least 12 seconds to force a restart (unlock the device after restart). This may resolve general issues.
• For devices with removable batteries: Remove and reinsert the battery, then restart the device to resolve the issue.
• When the charger is not in use, unplug it from the power outlet. Do not leave a fully charged battery connected to the charger for extended periods, as overcharging reduces battery life.

Standard Package Contents: Package box, Tablet, Manual, Protective film, Protective case, Headset, USB data cable, OTG cable, Charger.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Specific Absorption Rate (SAR) Information: This Mobile Phone meets the government's requirements for exposure to radio waves. The guidelines are based on standards developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.

Body-worn Operation: To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user's body and the handset, including the antenna. Third-party belt clips, holsters, and similar accessories should not contain metallic components. Use only the supplied or an approved antenna.

FCC ID: 2ANMU-WP28

Other Language Information

This manual also contains information in German, Russian, French, Japanese, Italian, Spanish, and Arabic, covering similar topics such as device components, accessories, battery, SIM card insertion, booting, SMS/MMS, language settings, SAR, safety, and maintenance.