IKEA LYCKSELE Chair Bed Frame Assembly Instructions

Step 1

Attach the side supports to the main frame. Use the Allen key (122030) and bolts (100241) to secure the supports at a 90-degree angle. Ensure the bolts are tightened securely.

Visual Description: An illustration shows a person using an Allen key to screw a bolt into the frame. Another inset shows a close-up of the connection at a 90-degree angle.

Step 2

With the help of another person, lift the slatted bed base and align it with the frame. Secure the bed base to the frame using bolts (100179) and nuts (107681). Use the wrench (108490) to tighten.

Visual Description: Two people are shown lifting and positioning the slatted bed base onto the frame. Close-ups show the connection points with bolts and nuts being tightened.

Step 3

Attach the remaining side supports. Use bolts (100179) and nuts (107681) to secure these supports. Ensure a snug fit.

Visual Description: Similar to Step 1, but attaching the other side supports. Close-ups illustrate the use of bolts and nuts.

Step 4

Connect the front legs. Use bolts (104304) and nuts (110085) to attach the front legs to the frame. Ensure they are firmly attached.

Visual Description: The front legs are being attached to the frame using bolts and nuts. The illustration shows the correct orientation and tightening process.

Step 5

Attach the locking mechanisms. Insert the locking components (10003240) into the designated slots on the frame. Push them in until they click into place.

Visual Description: An illustration shows the locking components being inserted into the frame until they audibly click.

Step 6

Secure the locking mechanisms. Use bolts (10078097) and nuts (110085) to further secure the locking mechanisms. Ensure a tight fit, leaving approximately 1 mm (1/16 inch) of space.

Visual Description: Close-up views show the bolts and nuts being used to secure the locking mechanisms, with a measurement indicating the slight gap.

Step 7

Fold the bed base. Carefully fold the slatted bed base into the chair position. Ensure it locks securely.

Visual Description: An illustration shows a person folding the slatted base into the chair configuration. An arrow indicates the direction of movement.

Step 8

Final check. Ensure all bolts and nuts are tightened and the frame is stable. The LYCKSELE chair bed is now ready for use.

Visual Description: The fully assembled LYCKSELE chair bed is shown.

Important Information

Safety First: Always assemble on a soft surface to avoid scratching the parts. Two people are recommended for assembly. Do not overtighten screws or bolts.

Care Instructions: Wipe clean with a damp cloth. Avoid harsh chemicals.

Product Information: The LYCKSELE chair bed frame is designed for durability and comfort. For more information or to purchase mattresses and covers, please visit the IKEA website.