LYCKSELE Sofa-Bed Frame Assembly
This guide provides step-by-step instructions for assembling the IKEA LYCKSELE sofa-bed frame.
General Assembly Information
- Tools required: Screwdriver ?
- Assembly is recommended for two people ???.
- Avoid assembling on soft surfaces ❌. Assemble on a hard, flat surface.
- Ensure all parts are present before starting ❓.
- Contact IKEA for assistance if parts are missing or damaged.
Parts List
Part Name/Description | Part Number | Quantity |
---|---|---|
Bracket/Connector | 10003240 | 1x |
Small Screw | 153693 | 2x |
Long Bolt | 100179 | 4x |
Medium Bolt | 100241 | 6x |
Washer | 107681 | 10x |
Nut | 104304 | 10x |
Short Bolt | 110086 | 2x |
Medium Bolt | 10078097 | 2x |
Nut | 110085 | 4x |
Wrench | 122030 | 1x |
Allen Key | 108490 | 1x |
Step 1: Attach Side Frame Components
Connect the side frame components. Use Allen key (108490) and 4x bolts (100241) with 4x washers (107681) and 4x nuts (104304). Ensure the frame is at a 90-degree angle ?.
Step 2: Attach Back Support Bar
Attach the back support bar to the assembled side frames. Use Allen key (108490) and 4x bolts (100179) with 4x washers (107681) and 4x nuts (104304).
Step 3: Connect Main Bed Frame
Connect the main slatted bed frame to the side supports. Use Allen key (108490) and 2x bolts (100179) with 2x washers (107681) and 2x nuts (104304). The wrench (122030) may also be used.
Step 4: Attach Front Support Bar
Attach the front support bar to the frame. Use Allen key (108490) and 2x bolts (100179) with 2x washers (107681) and 2x nuts (104304).
Step 5: Insert Slatted Bed Base
Carefully insert the slatted bed base into the assembled frame. ℹ️
Step 6: Secure Bed Base
Secure the slatted bed base to the frame. Use Allen key (108490) and 1x bolt (10078097) with 1x nut (110085) on each side. Ensure a 1 mm (1/16 inch) gap is maintained. The wrench (122030) may also be used.
Step 7: Attach Mechanism Arms
Attach the folding mechanism arms to the frame. Use Allen key (108490) and 2x bolts (110086) with 2x nuts (110085).
Step 8: Attach Locking Mechanism
Attach the locking mechanism components. Use the provided bracket (10003240) and 2x screws (153693). A 'Click!' sound indicates proper attachment.
Step 9: Place Mattress
Place the mattress onto the slatted base. Ensure the mattress is correctly positioned. ℹ️
Step 10: Folding and Unfolding
Follow the visual sequence to fold the sofa-bed into a sofa and unfold it back into a bed. Ensure smooth operation.
© Inter IKEA Systems B.V. 2021