RFRA - RF Room Thermostat
Installation Instructions
For use in normal environments.
CAUTION!
Installation and connection should only be carried out by a qualified person and in accordance with national wiring regulations.
If this device is used in a way not specified by the manufacturer, its safety may be impaired.
Ensure that this wireless enabled thermostat is installed 1 metre from any metallic object, television, radio or wireless internet transmitter.
Mounting Options
This thermostat can be mounted in the following ways:
- To a recessed conduit box
- To a surface mounted box
- Directly mounted on wall
- Table mounted with accessory provided.
Step 1: Product Overview and Specifications
Diagram shows the thermostat with dimensions (86mm x 86mm). It displays the CE mark, IP20 rating, type 1C, and compliance marks EN60730, EN60529, and B06484. It also indicates operating temperature ranges: 0-50°C (32-122°F) and 5-95% RH (Relative Humidity).
Step 2: Placement Guidelines
Illustrates placement recommendations. A radiator symbol with a cross (❌) indicates not to place near a radiator. A wall symbol with a cross (❌) indicates not to place on an external wall. A wall symbol with a cross (❌) indicates not to place on an internal wall. A window symbol with a cross (❌) indicates not to place near a window. A checkmark (✔️) symbol is shown for correct placement.
Step 3: Opening the Thermostat
Shows the thermostat casing. An arrow points to a release point on the side, with text "Press to open", indicating how to detach the front cover.
Step 4: Mounting the Backplate
Depicts the backplate being attached to a wall. A screwdriver is shown securing the backplate with screws.
Step 5: Attaching the Thermostat
Shows the thermostat unit being connected to the mounted backplate. An arrow indicates the motion to clip it into place.
Step 6: Table Mounting
Illustrates the use of accessories for table mounting. The thermostat is shown with "Mounting clips" and a "Stand" accessory, demonstrating how they fit together.
