Manufacturer of heating controls and automation products, including programmable thermostats, motorized valves, and the EMBER smart heating system.
EPH Controls is a dedicated supplier of heating control and automation products serving the residential and commercial markets in the UK and Ireland. The company specializes in user-friendly, energy-efficient solutions comprising programmable room thermostats, timeswitches, motorized valves, and underfloor heating controls.
A standout offering is their EMBER Smart Heating system, which allows homeowners to control multi-zone heating and hot water remotely via a smartphone app. With a focus on reliability and ease of installation, EPH Controls provides comprehensive support and a wide range of devices to optimize home comfort and energy usage.
Selected manuals from manuals+ curated for this brand.
Additional documents are a limited selection. Search all manuals.
Common questions about manuals, registration, and support for this brand.
On the programmer, press MENU to find 'P01 rF COn', select 'P02 gAtE', and press OK. On the Gateway, hold the RF connect button until the White LED flashes. 'CONNECTED' should appear on the programmer screen.
Use a pen to hold the reset button on the Gateway for 5 seconds until all LEDs flash. After 10 seconds, the device will return to normal operation with the RF connection cleared.
The system uses the EMBER Smart Heating Control App, available for download on the Apple App Store and Google Play Store.
EPH recommends using high-quality alkaline batteries like Duracell or Energizer. For ETRVs, Li-FeS2 (Lithium Iron) batteries are recommended.
You can pair up to four R_7-RFV2 programmers to a single GW04 Gateway.