Battery Security Camera User Manual
Introduction
This document serves as the user manual for the Battery Security Camera. Please read the Quick Guide carefully before using the product and keep it properly. Reminder: Please charge the device for 2 hours before using it.
Table of Contents
1. Smart Battery Camera - Packaging List
The package typically includes:
- 1x Camera
- 1x Camera Mount
- 1x USB Cable
- 1x Screw Package
- 1x User Guide
- 1x Solar Panel (Optional)
- 1x Reset Pin
Packaging List for PTZ Camera
The package for the PTZ Camera typically includes:
- 1x Camera
- 1x Camera Mount
- 1x USB Cable
- 1x Screw Package
- 1x User Guide
- 1x Solar Panel (Optional)
- 1x Positioning sticker
2. Appearance Description
The camera features various components for its operation and mounting. Descriptions are provided for different models:
Model Q10/Q11/Q12/Q15 Appearance:
Front View:
- 1. Indicator light
- 2. Lens
- 3. Spot light
- 4. PIR (Passive Infrared sensor)
- 5. Microphone
Back/Bottom View:
- 6. Speaker
- 7. Screw of wall mount
- 8. Reset Button
- 9. SD Card slot
- 10. Power supply port (DC-5V)
- 11. Turn on/off switch
Diagrams show the front and bottom/back views of the camera, with numbered callouts pointing to each component.
Model SP1 Appearance:
Main Unit:
- 1. Antenna
- 2. Wall mount bracket
- 3. Indicator light
- 4. Lens
- 5. Spot light & Infrared light
- 6. Microphone
- 7. PIR (Passive Infrared sensor)
- 8. Power supply port
- 9. Turn on/off switch
- 10. Reset Button
- 11. SD Card slot
Diagram shows the camera unit with antennas, wall mount, and labeled components on the front and bottom. The power supply and turn on/off switch are shown on a separate side panel.
3. Safety Guidelines
- Please do not place any fluid container on the product.
- Please charge the camera for 2 hours when using it for the first time.
- Please use the product in a ventilated environment and prevent blocking the vents.
- Please use the included power supply with the product to prevent damage.
- Please use the product under its standard working temperature and humidity.
4. Installation
- Ensure that the equipment in the package is in good condition and includes all assembly parts. If accessories are missing, please contact customer support.
- During installation, ensure the distance between the camera and the router is within an area with good WiFi signal.
- Make sure the walls are strong enough to withstand four times the weight of the camera and bracket.
- Please install the camera as close to the router as possible, and install the solar panel in a well-lit location.
- The camera supports 2.4 GHz & 5.8 GHz (dual band) WiFi.
Diagram illustrates optimal camera placement for WiFi signal strength, showing a camera mounted on a wall, connected wirelessly to a router, with people and pets nearby. Recommended height is indicated as approximately 6 feet.
5. Applications
The camera is suitable for monitoring various locations, including:
- Doorway
- Garage
- Yard
- Bedroom
- Baby room
- Living room
A collage of images shows the camera's suitability for different home environments.
6. Add Device
Software Download
1.1 Download Free App EseeCloud: Search for the free APP "EseeCloud" in the App Store or Google Play. The phone app may be updated periodically; if your app menu differs from the manual, please contact support for the latest user manual.
Image shows the EseeCloud app icon and a QR code for downloading the app.
Register Account and Log In:
1. Go to the login interface and click "phone number".
- a: Choose the region code and input your phone number.
- b: Follow the on-screen instructions for verification, which may involve a drag-and-drop security check (e.g., dragging a tennis ball through a red dot to a tennis racket).
- c: You will receive a verification code. Input the verification code to proceed.
- d: Input the code and register successfully.
Screenshots illustrate the login/registration process, including the safety certification step with a visual guide.
2. Account: Register an account with your phone number or email to log in.
Screenshots show the account registration interface for phone number or email login.
3. Quick Login: After your first login, the app may automatically recognize your phone number, allowing you to choose "quick login" on subsequent attempts.
Screenshot shows the quick login option.
4. More login methods: You can also log in via Wechat, Google, or Line accounts.
Screenshot shows options for logging in with third-party accounts.
7. Add Camera to Mobile App
Method 1 - By Bluetooth Connection:
Please fully charge the camera for 12 hours for the first use.
- Turn on the camera.
- Click "Add camera" on your mobile app.
- Please turn on Bluetooth. Enable the necessary permissions for the app to find devices.
- Find the new device and click on "Add".
- Choose your home WiFi. Please note it supports 2.4GHz/5GHz WiFi. Select your network and enter credentials.
- Waiting for configuring successfully, then you can name your camera.
- Setup motion detection alert if you need the function. Customize smart detection and alert message settings.
Screenshot shows the "Add smart device" button within the app.
Screenshots show the process of enabling Bluetooth and granting app permissions.
Screenshot shows the device being found and an "Add" button.
Screenshot shows the Wi-Fi selection screen.
Screenshots show the device configuration progress (e.g., 80% networking) and the screen to name the device after successful addition.
Screenshot shows settings for Motion Detection Alert and APP push alert message.
Method 2 - Scan to add:
1. Please fully charge the camera for 12 hours for first-time use. Turn on the camera.
Click "Add camera" on your mobile app.
Screenshot shows the "Add smart device" button.
Choose the "Scan to add" option on your mobile app.
Screenshot shows various "Add Device" methods, including "Scan to add".
Scan the camera code.
Screenshot shows the app scanning a QR code, followed by a "Scan code successfully" message.
Turn on the camera. Keep the camera on and pay attention to the prompt sound. If you cannot hear the sound, press and hold the Reset button to reset. Check "hear the device prompt sound" and click on "Next".
Screenshot shows the camera's reset button and a prompt to confirm hearing the sound before proceeding.
If you cannot or do not want to use Bluetooth connection, you can choose "cancel" when the Bluetooth connection prompt appears. After connecting to your WiFi, there will be a code on your phone. You can use your camera to scan the code on your phone to finish configuring the device.
Screenshot shows the device scanning a QR code displayed on the phone, with instructions to keep the phone 15-25cm from the camera lens and wait for a prompt sound.
8. To view on EseeCloud Software on PC
To view remotely on a PC, you need to register an account on EseeCloud via your mobile phone and add the device first.
Software Download Links:
- Windows: http://download.dvr163.com/tool/eseecloud/EseeCloud_Setup_3.0.8.0.exe
- MAC: http://download.dvr163.com/tool/EseeCloud-mac-2.0.8_20200228.zip
Screenshot shows the EseeCloud Camera Monitoring System user login interface.
Please note that the username and password can only be entered by hand, not pasted.
- Input the same account and password used on your mobile EseeCloud app and click login.
- After logging in, the device will automatically synchronize to the computer.
Screenshot shows the EseeCloud software interface with multiple camera feeds displayed.
9. FAQ
Q1. The solar camera stop working?
A: 1. Take down the camera to charge it. The blue light flashes, indicating it is charging.
2. After the camera is charged, please delete the device on the app, then press the reset button for 6 seconds, and add the device again.
Q2. The camera consumes too much power?
A: 1. You can select the "Optimal Battery Life" mode and set the record time.
2. Adjust the motion detection sensitivity to low, reduce frequent camera detection, and customize a detection area.
Screenshots show settings for recording mode (Optimal Battery Life, Optimal Surveillance, Uninterrupted Recording), motion detection sensitivity, and custom detection areas.
Q3: I didn't receive the motion detection alarm from my smartphone
A: 1. Go to the App, click the icon on the upper right corner, and enable "Alarm push".
2. If you still don't receive alerts, go to "Me" -> "System authority settings" and check if all permissions are enabled.
Screenshots show the app's alarm push settings and system authority settings, including permissions for location, microphone, notifications, camera, and albums.
Q4: There are no recordings when I check playback?
A: SD card storage:
- Please go to the settings interface -> Storage settings -> Local storage and check the status of the SD card. If there is no SD card, please take it out and insert it again.
- If the SD card is in normal condition, for stability, please format the SD card before use.
Cloud storage:
Please go to the settings interface -> Storage management -> Cloud storage and check the order for cloud storage (Cloud storage service is not free; payment is required). If these steps do not resolve the issue, please contact the Technical Support Team for further assistance.
Screenshot shows the storage settings interface, indicating local storage status and cloud storage options.
Q5: Can I add this camera to other EseeCloud security camera systems?
A: Yes, this camera is compatible with other EseeCloud wireless security camera systems.
Q6: How can I set it to 24/7 recording?
A: Click the settings icon ⚙️, click "settings", click "Recording setting", click "Record mode", and select "Uninterrupted recording". Please note that when the battery level is below 80%, it will automatically switch to optimal surveillance mode. Therefore, 24/7 recording of this camera only works with plug-in power.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
