Manuals+

Grundig Sonoclock 3500 Clock Radio

User Manual

Model: 01M-GCR1120-1121-04

Setup and Safety

Important Safety Information:

  • This device is designed for audio playback only.
  • Protect from moisture (water drops/splashes). Do not place liquid-filled vessels on the device.
  • Do not place naked flames (e.g., candles) on the device.
  • Disconnect the mains cable during thunderstorms.
  • Reset the device by unplugging and replugging the adapter if malfunctions occur due to static electricity or voltage surges.
  • Ensure adequate ventilation; do not cover ventilation slots.
  • Be aware that furniture surfaces may have chemical additives that can corrode device feet and leave residues.
  • Use the device only in moderate climates.
  • Clean with a clean, moist leather cloth; do not use cleaning agents.
  • Do not expose the backup battery to extreme heat.
  • Never open the device casing; warranty does not cover damage from incorrect handling.
  • The type plate is located on the bottom of the device.
  • Do not expose the device to extreme heat from sunlight or heaters.

Environmental Compliance and Disposal:

  • Complies with EU WEEE Directive (2012/19/EU) and RoHS Directive (2011/65/EU).
  • Dispose of used batteries and electronic equipment responsibly at designated collection points, not with household waste.

Package Information:

Packaging materials are recyclable. Dispose of them at local collection points.

This product fulfills EU directives 2014/53/EU, 2009/125/EC, and 2011/65/EU.

CE Declaration of Conformity available at: www.grundig.com/downloads/doc

Power Supply and Specifications

AC Adaptor:

  • Manufacturer: Dongguan Turnmax Electronic Co., Ltd.
  • Model: TM-K006VA-00501500PE-02
  • Input: 100 - 240V~, 50/60 Hz 0.25A
  • Output: 5V 1.5A 7.5W
  • Average Active Efficiency: 76.65%
  • No-load Power Consumption: <0.1W
  • Max. Power Consumption: <11 W (operation), <1W (standby)

Output:

  • USB Host: 5V 1A charge out

Backup Batteries:

  • Type: 2 x 1.5V UM4/R03/AAA

Frequency Bands:

  • DAB/DAB+: 174.928 – 239.200 MHz
  • Bluetooth (BT): 2402 - 2480 MHz (Max transmitted power: 4dBm)
  • FM: 87.5 ...108.0 MHz

Circuit Features:

  • Loudspeaker: 3 inch
  • Output Power: 2 W

Dimensions: W x H x L 200 x 120 x 65 cm

Weight: 450 gr

Technical and design modifications reserved.

Power Supply Operation

Mains Operation

Ensure mains voltage on the type plate matches your local supply. Plug the power adapter into a socket (100 - 240V~, 50/60 Hz).

Caution: The mains plug must remain readily operable for full disconnection.

Inserting the Back-up Battery

Backup batteries retain settings during power failure. Open the battery compartment, insert 2 x 1.5V AAA batteries observing polarity, and close the compartment.

Note: Remove backup batteries if flat or if the device will not be used for a long period.

Environmental Note: Dispose of used batteries according to local regulations.

DAB Mode

Antenna

Align the wire antenna for optimal DAB and FM reception.

Switching ON/OFF

Use the ON/OFF button to switch the device from standby or to put it into standby.

Searching and Saving Radio Stations (Automatically)

The radio performs Automatic Station Search (ATS) on first use, storing DAB stations first, then FM stations.

Selecting a DAB Station

  1. Press ON/OFF to turn on the radio.
  2. Press MODE/MENU until DAB mode is selected.
  3. Use TUNING + or TUNING - to select a station from the list.
  4. Press SNOOZE/SLEEP/INFO/SELECT to select the desired station.

Display DAB Information

Press SNOOZE/SLEEP/INFO/SELECT to cycle through display options: Station name, DLS, Program type, Multiplex name, Frequency, Bit rate, Signal strength, time, and data. Display reverts to clock after 10 seconds (except text). A signal strength display shows reception quality, with | indicating minimum required strength.

Manual Tuning

Tune to a specific DAB frequency in Band III:

  1. Press and hold MODE/MENU (2 sec) to show DAB menu.
  2. Use TUNING + or TUNING - until 'MANUAL' is displayed.
  3. Press SNOOZE/SLEEP/INFO/SELECT to enter manual tuning.
  4. Use TUNING + or TUNING - to select the desired DAB channel.
  5. Press SNOOZE/SLEEP/INFO/SELECT to tune to the chosen frequency.
  6. Press SNOOZE/SLEEP/INFO/SELECT to save the station and return to normal tuning.

Dynamic Range Control (DRC)

DRC enhances quieter sounds in noisy environments.

  1. Press ON/OFF to turn on the radio.
  2. Press and hold MODE/MENU (2 sec) to show DAB menu.
  3. Use TUNING + or TUNING - until 'DRC' is displayed.
  4. Press SNOOZE/SLEEP/INFO/SELECT to enter adjustment mode.
  5. Use TUNING + or TUNING - to select DRC setting (DRC 0, DRC 1, or DRC ½).
  6. Press SNOOZE/SLEEP/INFO/SELECT to confirm.

Prune Stations (DAB)

Removes stations not found or not received for a long time (marked with [unknown station]).

  1. Turn on radio, select DAB mode.
  2. Press and hold MODE/MENU (2 sec) to show DAB menu.
  3. Use TUNING + or TUNING - until 'PRUNE' is displayed.
  4. Press SNOOZE/SLEEP/INFO/SELECT. 'SELECT' will be shown.
  5. Press SNOOZE/SLEEP/INFO/SELECT to remove invalid stations.

FM Mode

Tuning FM Radio Stations (Automatically and Manually)

You can store 10 stations on presets.

  • Automatic Tuning: Press and hold TUNING + or TUNING - until the frequency display runs rapidly. The search stops when a station is found.
  • Manual Tuning: Briefly press TUNING + or TUNING - to step frequency by 50kHz.

Display FM Information

Press SNOOZE/SLEEP/INFO/SELECT to cycle through display options: Station name, Radio text, PTY, Frequency, time, and data. Display reverts to clock after 10 seconds (except text).

FM Scanning Settings

Choose between 'Local FM' (for strong stations) and 'Distant' (for all stations).

  1. Turn on radio in FM mode.
  2. Press and hold MODE/MENU; 'Setting' is displayed.
  3. Press SNOOZE/SLEEP/INFO/SELECT to enter settings.
  4. Use TUNING + or TUNING - to select 'Local FM' or 'Distant'.
  5. Press SNOOZE/SLEEP/INFO/SELECT to confirm.

Searching and Saving Radio Stations (DAB or FM)

Store up to 10 stations on presets for DAB or FM mode.

  1. Turn on radio in DAB or FM mode.
  2. Select desired DAB station or tune to desired FM station.
  3. Press and hold PRESET to activate memory function.
  4. Use TUNING + or TUNING - to select the preset number.
  5. Press SNOOZE/SLEEP/INFO/SELECT to save the station. (Existing presets will be overwritten).
  6. Repeat for more stations.

Selecting Stored Stations

Press PRESET to cycle through saved stations.

Adjusting Volume

Use VOLUME -/AL1 or VOLUME +/AL2 buttons.

Bluetooth Mode

Connect to Mobile Device

  1. Turn on the device.
  2. Press MODE/TIME repeatedly until 'bt' is shown. The Bluetooth icon will flash.
  3. On your mobile device, find "Sonoclock 3500" in the Bluetooth device list and connect.
  4. The Bluetooth icon stops flashing when connected.

Playback Control via Bluetooth

  1. Turn on the radio and connect via Bluetooth.
  2. Press PRESET to toggle play/pause.
  3. Press TUNING - for the previous song.
  4. Press TUNING + for the next song.

Pairing Mode

  1. Turn on the radio.
  2. If connected, press and hold PRESET to disconnect the current Bluetooth connection. The Bluetooth icon will flash, indicating pairing mode.
  3. Repeat connection steps for a new device.

Adjusting Volume

Use VOLUME -/AL 1 or VOLUME +/AL 2 buttons.

Power Saving in Bluetooth

The device enters standby mode after 15 minutes if no Bluetooth connection is active.

Timer Mode

Synchronise Time from DAB or FM

  1. Turn on the device. Press and hold MODE/MENU (2 sec) to activate menu settings.
  2. Use TUNING + or TUNING - to find 'SYSTEM', then press SNOOZE/SLEEP/INFO/SELECT.
  3. Use TUNING + or TUNING - to find 'TIME', then press SNOOZE/SLEEP/INFO/SELECT.
  4. Use TUNING + or TUNING - to find 'UPDATE', then press SNOOZE/SLEEP/INFO/SELECT.
  5. Use TUNING + or TUNING - to choose time source ('ANY', 'DAB', 'FM', 'NONE'), then press SNOOZE/SLEEP/INFO/SELECT.

Manual Set Time

  1. Follow steps 1-3 of 'Synchronise Time'.
  2. Select 'SET TIME', then press SNOOZE/SLEEP/INFO/SELECT.
  3. Use TUNING + or TUNING - to select desired time and date, and SNOOZE/SLEEP/INFO/SELECT to confirm.

Set Time Display Format

  1. Follow steps 1-3 of 'Synchronise Time'.
  2. Select 'SET FORMAT', then press SNOOZE/SLEEP/INFO/SELECT.
  3. Use TUNING + or TUNING - to select '12' or '24', and SNOOZE/SLEEP/INFO/SELECT to confirm.

Setting the Alarm Time

  1. Put the device in standby mode.
  2. Press and hold VOLUME -/AL 1 (for alarm 1) or VOLUME +/AL 2 (for alarm 2).
  3. Example: Hold VOLUME -/AL 1, then press SNOOZE/SLEEP/INFO/SELECT to start alarm 1 setup.
  4. Choose 'ON' to activate or 'OFF' to deactivate the alarm, then press SNOOZE/SLEEP/INFO/SELECT.
  5. Use TUNING + or TUNING - to select the alarm time, then press SNOOZE/SLEEP/INFO/SELECT.
  6. Use TUNING + or TUNING - to choose frequency ('WEEKDAYS', 'WEEKENDS', 'DAILY', 'ONCE'), then press SNOOZE/SLEEP/INFO/SELECT. (If 'ONCE', set specific date).
  7. Use TUNING + or TUNING - to select alarm source ('DAB', 'FM', 'BUZZER'), then press SNOOZE/SLEEP/INFO/SELECT. (If 'DAB'/'FM', choose preset or last listened station).
  8. Use TUNING + or TUNING - to select alarm volume, then press SNOOZE/SLEEP/INFO/SELECT to confirm. 'SAVED' will be displayed.

Notes: Alarm duration is 60 minutes. The alarm icon will light up when activated.

Snooze the Alarm

Press SNOOZE/SLEEP/INFO/SELECT while the alarm is sounding. The SNOOZE LED will light up. The alarm will sound again after nine minutes.

Cancelling the Alarm

Press ON/OFF while the alarm is sounding. The alarm will sound again at the next set time.

Activating and Deactivating the Alarm

In standby mode, press VOLUME -/AL 1 or VOLUME +/AL 2 to activate or deactivate the alarm with the last used settings.

Sleep Timer

  1. Press and hold SLEEP/SNOOZE/INFO/SELECT (approx. 2 sec) to activate.
  2. Press TUNING + or TUNING - to select auto-switch-off timer (10 to 90 minutes). Press SNOOZE/SLEEP/INFO/SELECT to confirm.
  3. To switch off before the set time: press and hold SNOOZE/SLEEP/INFO/SELECT (approx. 2 sec), press TUNING +/- until 'OFF' is displayed, then press SNOOZE/SLEEP/INFO/SELECT to confirm.

Brightness Settings

  1. Turn on the device. Press and hold MODE/MENU (2 sec) to activate menu settings.
  2. Use TUNING + or TUNING - to find 'SYSTEM', then press SNOOZE/SLEEP/INFO/SELECT.
  3. Use TUNING + or TUNING - to find 'DIMMER', then press SNOOZE/SLEEP/INFO/SELECT.
  4. Choose 'NORMAL' for radio modes or 'STANDBY' for standby mode brightness.
  5. Use TUNING + or TUNING - to select brightness level ('HIGH', 'MID', 'LOW'), then press SNOOZE/SLEEP/INFO/SELECT to confirm.

Language Settings

  1. Turn on the device. Press and hold MODE/MENU (2 sec) to activate menu settings.
  2. Use TUNING + or TUNING - to find 'SYSTEM', then press SNOOZE/SLEEP/INFO/SELECT.
  3. Use TUNING + or TUNING - to find 'LANGUAGE', then press SNOOZE/SLEEP/INFO/SELECT.
  4. Use TUNING + or TUNING - to select desired language, then press SNOOZE/SLEEP/INFO/SELECT to confirm.

Factory Reset

  1. Turn on the device. Press and hold MODE/MENU (2 sec) to activate menu settings.
  2. Use TUNING + or TUNING - to find 'SYSTEM', then press SNOOZE/SLEEP/INFO/SELECT.
  3. Use TUNING + or TUNING - to find 'FACTORY', then press SNOOZE/SLEEP/INFO/SELECT.
  4. Press SNOOZE/SLEEP/INFO/SELECT to confirm reset to factory defaults.

Charging a Mobile Phone

The USB socket on the back provides 5V DC for charging mobile phones. Connect your phone with an appropriate cable. USB power is available in all operating modes, including standby. Refer to your mobile phone's manual to confirm USB charging compatibility. The USB socket is for power output only and cannot be used for music playback from a USB stick.

PDF preview unavailable. Download the PDF instead.

Sonoclock 3500 BT DAB 202106150141267 User Manual - File Long fr FR Adobe PDF Library 15.0 Adobe InDesign 16.0 (Macintosh)

Related Documents

Preview Grundig Sonoclock 3500 User Manual: DAB Radio, Bluetooth, and Alarm Clock Features
This user manual provides comprehensive instructions for the Grundig Sonoclock 3500 clock radio, covering setup, safety, DAB/FM radio tuning, Bluetooth connectivity, alarm functions, timer settings, and technical specifications. Learn how to operate your Grundig Sonoclock 3500 effectively.
Preview Grundig Sonoclock 3500 BT DAB+ Clock Radio User Manual
User manual for the Grundig Sonoclock 3500 BT DAB+ clock radio. Learn how to set up, operate DAB and FM radio, connect via Bluetooth, use alarm and timer functions, and understand safety and technical specifications.
Preview Grundig Sonoclock 2500 BT Clock Radio User Manual and Instructions
User manual for the Grundig Sonoclock 2500 BT clock radio, covering setup, safety, operation, radio tuning, alarm settings, and Bluetooth connectivity. Includes models SCC 240, SCN 230, and Sonoclock 2000.
Preview Grundig Sonoclock 590 & 590 Q Clock Radio User Manual
Comprehensive user manual for the Grundig Sonoclock 590 and Sonoclock 590 Q clock radios, covering safety, setup, operation, alarm functions, sleep timer, and technical specifications.
Preview Grundig SCC 240 Clock Radio User Manual
User manual for the Grundig SCC 240 Clock Radio, detailing setup, safety, radio mode, Bluetooth mode, timer functions, and technical specifications.
Preview Grundig DTR 6000 & TR 3350 Internet Radio User Manual
User manual for Grundig DTR 6000 2.1 BT DAB+ WEB and TR 3350 BT DAB+ WEB internet radios. Covers setup, operation, features, safety, DAB+, FM, Bluetooth, and internet radio functions.
Preview Grundig Wake-up Light with FM Radio Instruction Manual
Discover the Grundig Wake-up Light with FM Radio (Model JW-6640MD, Item 871125208195), a versatile alarm clock featuring sunrise and sunset light simulations, natural sounds, FM radio, and a bedside lamp. This instruction manual provides comprehensive guidance on setup, time and alarm settings, light functions, and troubleshooting for an enhanced morning and evening routine.
Preview Grundig GBT Band Bluetooth Speaker User Manual
This user manual provides instructions and safety information for the Grundig GBT Band Bluetooth Speaker, covering its controls, connections, operation, troubleshooting, and technical specifications. It supports DAB/FM radio and Bluetooth connectivity.