Manuals+
SAMBORD Pendant Lamp with 3 Lamps - IKEA Assembly Instructions

SAMBORD Pendant Lamp

Brand: IKEA

Safety Information

⚠️ IMPORTANT! If you encounter any issues with the electrical installation, please contact a qualified electrician. Always disconnect power to the circuit before beginning installation.

⚠️ CAUTION! Do not overtighten.

Tools and Components

Tools recommended for installation:

  • Phillips head screwdriver
  • Flat head screwdriver
  • Pencil
  • Scissors

Components:

  • Main bar assembly
  • 3x Lampshades
  • Mounting hardware (brackets, anchors, screws, connectors)

Assembly Instructions

  1. Step 1: Prepare the Main Bar

    Attach the two mounting brackets to the ends of the main bar. Ensure they are securely fastened.

    ℹ️ Ensure the ceiling fixture is positioned within a maximum distance of 500 mm (19 11/16") from the main suspension point.

  2. Step 2: Mark Ceiling Points

    Measure 920 mm (19 11/16") and mark two points on the ceiling for the mounting hardware.

  3. Step 3: Install Ceiling Mounts

    Install the ceiling anchors or hooks at the marked points. Screw the mounting fixtures into the anchors.

  4. Step 4: Hang the Main Bar

    Carefully lift the main bar assembly and hang it onto the installed ceiling fixtures. Secure the assembly by screwing in the provided parts.

  5. Step 5: Connect Wires (Initial)

    Connect the electrical wires using the provided connector block. Insert the wires according to the diagram.

  6. Step 6: Secure Wire Connector

    Ensure the wires are properly seated in the connector block. Push the connector into place.

  7. Step 7: Route and Secure Wires

    Route and secure the electrical wires as shown in the diagram.

  8. Step 8: Attach Lampshade Holders

    Attach the lampshade holders to the main bar. Push the holder upwards and rotate to lock it in place.

  9. Step 9: Connect Final Wires

    Connect the remaining electrical wires to the lampshade holder.

  10. Step 10: Attach Lampshades

    Attach the lampshades to the holders. Push the lampshade upwards and rotate to secure it. ⚠️ CAUTION! Do not overtighten.

  11. Step 11: Final Lampshade Attachment

    Repeat Step 10 for all three lampshades. Ensure all lampshades are correctly attached and oriented.

  12. Step 12: Bulb Replacement

    ⚠️ When changing bulbs, use only GU10 LED bulbs. Do not use GU10 Halogen bulbs.

  13. Step 13: Final Check

    Verify that the lamp is assembled correctly and all parts are securely in place.

  14. Step 14: Adjust Cable Length

    Adjust the length of the suspension cables as needed by using the adjustment mechanism.

PDF preview unavailable. Download the PDF instead.

sambord-pendant-lamp-with-3-lamps-black-white AA-2482413-3-100 Adobe InDesign 18.5 (Windows) Adobe PDF Library 17.0

Related Documents

Preview SAMBORD Pendant Lamp Installation Guide
Comprehensive installation guide for the IKEA SAMBORD pendant lamp with three lights. Includes safety precautions, required tools, step-by-step assembly instructions, and bulb replacement advice.
Preview IKEA SAMBORD Pendant Lamp Assembly Instructions
Comprehensive assembly guide for the IKEA SAMBORD pendant lamp with 3 lights. Learn how to safely install your new lighting fixture with step-by-step instructions and important safety tips.
Preview FELSISK Pendant Lamp Assembly Instructions | IKEA
Step-by-step guide for assembling and installing the IKEA FELSISK pendant lamp with 4 lamps. Includes important safety information and installation tips.
Preview BACKSTÖRN LED Pendant Lamp Assembly Instructions
Comprehensive assembly guide for the IKEA BACKSTÖRN LED pendant lamp, including safety warnings, installation tips, and detailed step-by-step instructions for mounting and setup.
Preview ASIGE Pendant Lamp Installation Guide - IKEA
Concise and accessible installation instructions for the IKEA ASIGE pendant lamp, including safety precautions and step-by-step assembly guidance.
Preview BÄCKNATE Pendant Lamp Assembly Instructions
Step-by-step assembly guide for the IKEA BÄCKNATE pendant lamp, including parts list and assembly diagrams. Model AA-2425743-5.
Preview AKTERSPRING Pendant Lamp Assembly Instructions | IKEA T2405
Step-by-step assembly instructions for the IKEA AKTERSPRING pendant lamp (T2405), including essential safety guidelines, parts list, and detailed visual descriptions for installation.
Preview SOLVINDEN Pendant Lamp Assembly Instructions
This document provides assembly instructions for the IKEA SOLVINDEN pendant lamp. It includes safety warnings, parts lists, and step-by-step guidance for putting the lamp together.