Jewenwils Indoor Mechanical Pin Timer

Please pay attention to the warning signs. Read the instructions with caution before operating and keep them properly.

Warning: To reduce the risk of fire, electric shock or personal injury, please strictly follow the instructions.

• Do not connect any devices which exceed the maximum ratings of the timer.
• Do not connect this timer to appliances that contain heating elements (cooking appliances, heaters, irons, etc.). Failure of the timer to shut off such devices may lead to overheating and potential fire.
• Do not immerse in water.
• Children are not allowed to use the timer without supervision.
• Do not disassemble or repair the product, but only by authorized service personnel.
• Always unplug and store indoors when not in use.

Product Layout

The Jewenwils Indoor Mechanical Pin Timer features a side switch, a timer dial, and outlets for controlled devices. The timer dial has a circular face with numbers indicating hours, and a series of pins around its circumference.

1. Side Switch

The side switch is used to set the timer function: Always ON or Timer Control.

2. Timer Dial

Day time is from 7:00 AM to 6:00 PM. Night time is from 7:00 PM to 6:00 AM. Each pin represents 30 minutes, so 2 pins equal 1 hour. A pin in the down position means the device is ON, and a pin in the up position means the device is OFF.

3. Outlets

Plug the lights or devices to be controlled by the timer into one of the outlets.

Operation Instructions

1. Set the current time: Turn the dial clockwise until the arrow indicates the current time.
2. Set ON/OFF periods: Begin with all pins pulled up. Push the pins down for the periods of time you want the timer to be ON. Pins in the down position represent ON, and pins in the up position represent OFF.

↑ Pins Up = Light/Device OFF
↓ Pins Down = Light/Device ON

Note: Pins indicated by the arrow cannot be pressed down; rotate the dial to make it work.

3. Activate Timer: Push the "ON / Timer Control" switch to the "Timer Control" position and plug the timer into the wall socket. Users may override the timer's operation by setting the switch to the "ON" position, which will keep the power supply always ON. Be sure to set the switch back to the "Timer Control" position for proper timer function.
4. Connect Device: Plug the electrical device directly into the timer. Ensure the device is in the ON state so the timer can control it properly.
5. Blackout Reset: If a blackout occurs, reset the time as indicated above.

Specifications:

• Input Voltage: 120VAC 60Hz
• Max. Current:
  • 15A Resistive
  • 15A General Use
  • 1875W Tungsten
  • 1/2HP

One Year Limited Warranty

Supported by its professional R&D team and QC team, Jewenwils provides a One Year Warranty for materials and workmanship from the purchase date. The warranty does not cover damage caused by personal misuse or improper installation. To receive customer service, customers should attach their Order ID and Name.

The product conforms to UL STD 917 and is certified to CSA STD C22.2 No.177 by Intertek.