WARNING
To reduce the risk of fire, electric shock, or personal injury, users should strictly follow these instructions:
- The timer must be mounted in a vertical position with the outlets facing downward and at least 2 feet above the ground level.
- Do not connect any devices which exceed the maximum ratings of the timer.
- Do not immerse in water.
- Children are not allowed to use the timer without supervision.
- Do not disassemble or repair the product; only authorized service personnel should perform repairs.
- Always unplug and store indoors when not in use.
Product Layout
The Jewenwils Outdoor Mechanical Pin Timer consists of a main unit with a flexible cord and plug, and a detailed timer dial. Key components are:
- 1. Cover: The protective outer casing of the timer.
- 2. Timer dial: A circular dial with 48 pins, used to set ON/OFF times.
- 3. Switch: A toggle switch for selecting "Always ON" or "Timer Control" mode.
- 4. Outlet: The receptacle where lights or devices are plugged in for timer control.
The timer dial is marked with hours (e.g., 1-12, 1-12) and features a central "TIME" indicator. The outer ring of the dial contains 48 adjustable pins, each representing 30-minute increments. White semicircles typically indicate 7 AM - 6 PM, and black semicircles indicate 7 PM - 6 AM. The dial can be rotated to set the current time and program desired operation periods.
Installation
This outdoor mechanical timer features 48 pins with a 24-hour daily repeat function. It has a full 13 Amp rating, suitable for handling lighting and heavy-duty loads.
Operation Instructions
- Locate an electrical outlet that is close to the device to be controlled.
- Push the "ON / TIMER" switch to the "TIMER" position and plug the timer into the outlet.
- Set the current time by turning the dial clockwise until the arrow indicates the present time. The pins (slices around the dial) are in increments of 30 minutes. White semicircles represent 7 AM - 6 PM, and black semicircles represent 7 PM - 6 AM.
- Set the desired time period for the timer to be ON by lifting up the pins around the undesired time period. Pins in the down position represent ON, and pins in the up position represent OFF.
- Note: Pins indicated by an arrow cannot be pressed down; rotate the dial to enable adjustment.
- Plug the electrical device directly into the timer. Ensure the device is in the "ON" state for proper timer control.
- Operation of the timer can be overridden by setting the "ON" switch to ON. The switch should be set back to "TIMER" for proper timer function.
- In case of a blackout, reset the time of day as indicated in step 3.
Specifications
Input Voltage:
- 125V, 60Hz
Max Power Rating:
- 125V, 60Hz, 1625W
- 13A Resistance
- 13A General Use
- 1625W Tungsten
- 500VA Electronic Ballast
Cord:
- SJTW 16/3 AWG
One Year Limited Warranty
Supported by a professional R&D team and QC team, a One Year Warranty is provided for materials and workmanship from the purchase date. The warranty does not cover damage caused by personal misuse or improper installation. Customers should attach their Order ID and Name for assistance from the dedicated customer service team.
This product is UL Listed (CULUS LISTED) and manufactured in China. It is designed to be recyclable ♻️ and should be disposed of properly ?️.
