Human Touch®: Partners in Your Well-Being
For decades, Human Touch® has been a leader in the field of massage products. We create state-of-the-art products that embrace the latest technology while applying the ancient healing art of massage. Balancing your physical and mental needs requires the right mix of proper nutrition, exercise, and massage. Human Touch Massage Systems are vital components for achieving balance between physical and mental well-being.
To learn more about our company and our products, we invite you to visit us on the Internet at: www.humantouch.com or contact your local distributor.
Human Touch Technology® is the preferred technology of the ACCO. www.accoweb.org
Accreditation seals from the American College of Chiropractic, World Federation of Chiropractic, and Health & Wellness Club are displayed.
Please send any questions or comments regarding this manual to documentation@humantouch.com
Welcome to Human Touch®
Your Human Touch massage chair is the perfect bridge between state-of-the-art technology and the ancient healing art of massage. It's a key ingredient for a balanced life—and it's right in your own home!
Your Human Touch massage chair incorporates Human Touch Technology®, the very latest Robotic Massage® system. It emulates the same techniques used by massage and chiropractic professionals for back and spinal care. It's hard to believe it's not human!
To ensure that you don't overlook any of your chair's features, and that you use it safely, read this manual carefully. Then sit back, relax, and enjoy!
Keep It Safe
Important Safety Instructions
When using an electrical appliance, basic precautions should always be followed, including the following:
Read all instructions before using this appliance.
DANGER: To reduce the risk of electrical shock
Always unplug this product immediately after using and before cleaning.
WARNING: To reduce the risk of burns, fire, electric shock or injury to persons:
- Do not put hands or fingers near the massage mechanism or rollers while this product is running. Touching the mechanism can result in injury from the rollers squeezing together.
- If the power lead is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
- An appliance should never be left unattended when plugged in. Unplug when not in use, and before adding or removing parts.
- Do not operate under blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury to persons.
- Close supervision is necessary when this appliance is used by, on, or near children, invalids, or disabled persons. Keep children away from extended foot support (or other similar parts).
- Use this product only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
- Never operate this appliance if it has a damaged lead or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return this product to a service centre for examination and repair.
- Do not carry this appliance by supply lead or use cable as a handle.
- Always keep the power lead away from heated surfaces.
- Never operate the appliance with the air openings blocked. Keep the air openings free of lint, hair, and the like.
- Never drop or insert any object into any opening.
- Do not use outdoors.
- Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
- To disconnect, turn all controls to the OFF position, then unplug.
- Do not massage any area of the body that is swollen, inflamed or covered with skin eruptions.
- Do not use on unexplained calf pain.
- Do not use this product when standing on a damp floor, or when any part of the body is in contact with plumbing or any similar ground.
- Do not use this product if noise above normal sound is heard.
- Do not stand on or in appliance. Use only while seated.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
Save These Instructions
Do not attempt to repair this product yourself. This product is designed for personal in-home use. Commercial use will void warranty.
Safety Precautions
- Comfortable clothing is recommended while using this product.
- This product is designed to be used whilst the user is in a relaxed position. Never force any body part into the backrest area while the rollers are moving.
- If you feel any abnormal discomfort during the operation of this product, turn off the power immediately and do not use the product. Consult your doctor.
- Do not sit on the remote control.
- Do not pull on the AC lead.
- When using this product after it has been in storage, check to see that the product is operating properly prior to use.
- Always confirm that there are no obstacles behind the product and that there is sufficient space to recline.
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
Get Ready
Unpack the Box
Diagram showing the chair in a folded position and a separate backrest pad.
1. Unfold the Chair
Pull gently up on the headrest to unfold the chair to an upright position. When completely unfolded, the backrest locks into place.
2. Attach the Backrest Pad
Attach the backrest pad to the backrest using the two zips. From the front of the chair, push the flap located at the bottom of the backrest pad down behind the seat.
Diagram illustrating the chair being unfolded by pulling the headrest upwards.
Diagram showing the backrest pad being attached with zippers and a flap being tucked behind the seat.
Your Human Touch massage chair requires some simple assembly (no tools required). Just install the backrest pad and you've finished!
Take a Seat
1. Plug It In
Plug the power cord into a 230 VAC power source.
Illustration of a power plug being inserted into a wall socket.
2. Child Safety Lock
Make sure child safety lock is set to Unlock.
Diagram showing the child safety lock switch in 'Locked' and 'Unlocked' positions.
Setting the Child Safety Lock to the Lock position prevents the power switch from being turned on. Keep the child safety lock in the Locked position when unattended, to prohibit children from using the chair.
3. Power On
Turn the master power switch (on the left-hand side of the chair) to ON.
Illustration of the main power switch on the side of the chair being turned ON.
4. Get Comfortable
Use the remote control back angle buttons to adjust the backrest position.
Illustration of a hand using the remote control to adjust the backrest angle.
Using your Human Touch™ massage chair is easy! Just plug it in, turn it on, then use the recline buttons to adjust the backrest angle for maximum comfort.
Take Control
Massage Programmes massage the specified area of your back for 15 minutes, using a variety of massage techniques. The corresponding LED lights on the remote indicate which massage mode is currently in use.
- Full Back Refresh: Massages your entire back.
- Neck/Shoulder Relief: Focuses the massage on your upper back.
- Lower Back Release: Focuses the massage on your lower back.
- Zone: Targets your massage to a six-inch (15.24cm) zone. Use the Position buttons to focus your massage on the desired area.
Power/park: Stops the massage and parks the massage rollers at the top of the backrest.
Backrest: Use this button to adjust the backrest angle for maximum comfort.
Position: Use this button along with any stationary massage mode, to target the massage to the desired area of your back. You can press this button before or after selecting the massage mode.
When changing backrest direction, there is a slight pause while the chair gears shift. This is perfectly normal.
Massage Techniques
Massage Mode | What it Does | Benefits |
---|---|---|
KNEADING Illustration depicting the kneading massage technique, showing hands applying circular motions. |
Kneads your back in a small, circular motion on both sides of your spine simultaneously. | Relieves tension and soreness by lifting and stretching muscles. Improves circulation and helps bring vital nutrients to the spinal area. |
PERCUSSION Illustration depicting the percussion massage technique, showing rapid tapping strokes along the spine. |
Alternates rapid-tapping strokes along the spine to stimulate both spinal muscles and spinal joint areas, emulating the percussive massage technique used in sports medicine for deep muscle therapy. | Flexes spinal joints and relieves pressure on the spinal column, invigorating the entire back area. |
COMPRESSION Illustration depicting the compression massage technique, showing hands applying pressure and rocking motion. |
Presses on spinal muscles and spinal joint areas using alternating strokes and a gentle rocking motion, emulating a technique used in sports medicine and in spinal therapy by chiropractors. | Spreads and puts pressure on deep muscle tissue, forcing it to relax, while the rocking motion loosens spinal joints. Aides in muscle and joint repair due to strain from exercise, long hours bent over a desk, or just day-to-day stress, and can improve mobility and overall posture. |
ROLLING Illustration depicting the rolling massage technique, showing hands rolling up and down the spine. |
Rolls gently up and down your back near your spine. | Warms and loosens your muscles, preparing your back for deeper massage. Relieves muscle tension, improves circulation and relaxes the back. |
Now choose a massage mode to suit your mood. Your Human Touch massage chair lets you customise your massage using a wide variety of massage modes. Choose from three stationary massage modes and a rolling massage, or combine them! Use the Zone and Position buttons to target your massage to a specific area, or select one of the three auto massage programmes and let the chair take control. No matter how you use it, your Human Touch massage chair offers maximum massage flexibility and refreshing benefits.
Customise Massage Intensity
The massage-softening pad softens the massage intensity. For a stronger massage, remove the massage-softening pad.
1. Flip the head pillow over the headrest, to the back of the chair.
Diagram showing the head pillow being flipped over the headrest.
2. Open the two backrest zips most of the way down the backrest; do not detach the backrest pad from the backrest.
3. Pull the backrest pad outward, then open the zip pocket inside.
Diagram showing the backrest zippers being opened and the pad pulled outward.
4. Insert or remove the massage-softening pad, as desired.
Diagram showing the massage-softening pad being inserted or removed from a pocket.
5. Close the zipped pocket and the two backrest zips.
6. Flip the head pillow over to the front of the chair.
Diagram showing the head pillow being flipped back to the front.
To experience the full power of Human Touch just remove the massage-softening pad. But keep it handy, in case you want to replace it in the future.
Replacement massage-softening pads are available from Human Touch, for an additional charge.
Your Human Touch massage chair may have zips that are closed with a plastic Security Tie. Cut the Security Tie with a nail clipper or other suitable instrument. Take care to not cut the chair upholstery.
Care and Maintenance
To keep your product working and looking its best, please follow these simple care guidelines.
Cleaning:
- Be sure to unplug before cleaning.
- Do not use benzene, thinner or any other solvents on your massage chair.
- Remove dust on the backrest or armrest with a vacuum cleaner.
- If the backrest or armrests become dirty, wipe with a damp cloth, then a dry cloth.
- Common upholstery cleaners may be used for tough stains.
- When cleaning the remote control or around the power switch, use a dry cloth only. Never use a damp cloth to clean the controller or power switch.
Fabric Care:
To maintain your Human Touch product in optimum condition, dust it frequently and/or vacuum it with a soft brush vacuum extension. Faux Suede products can also be brushed with a suede brush. Wipe with a slightly damp cloth as necessary. For tougher stains on non-leather products, use a mild detergent mixed with water. Leather products should be wiped down occasionally with a leather furniture cleaning solution.
WARNING:
Be sure to test any cleaning solution on a small, inconspicuous part of the product to ensure that the colour does not fade prior to using the solution on the entire product surface.
Maintenance and Repair:
- The mechanisms of this product are specially designed and constructed to be maintenance free. No periodic lubrication or servicing is required.
- Your chair should only be serviced by an authorised service centre.
Storage:
- When not in use for a long period of time, we recommend that the chair be covered, the power lead be coiled and that the unit be placed in an environment free of dust and moisture.
- Do not store near heat or open flame. Do not leave this product exposed to direct sunlight for long periods of time. This may cause fading or damage.
Miscellaneous:
- Foreign objects should not be inserted between the massage nodes or the unit housing.
- Care should be taken not to overload the unit.
Specifications*
- Operating Voltage: 220-240V~ 50/60Hz
- Power Consumption: 80 Watts
- Chair Size (Reclined): 133.4cm L x 74.3cm W x 80.6cm H (52.5"L x 29.25"W x 31.75"H)
- Chair Weight: 41.3kg (91 Lbs.)
- Required recline clearance: 27cm (10.5")
- Maximum Load Weight: 130kg (285 Lbs.)
*Specifications are subject to change without prior notice.
Warranty
For warranty information, please contact your distributor.