Aura Opti T8 Long Life G4 LED Tube Installation Manual
Model: Aura Opti T8 Long Life G4
Important Safety Information and Warnings
⚠️ WARNING! Please read the installation instructions carefully and follow them to ensure safety.
This LED tube is only suitable for 50/60 Hz operation.
Only for use in dry indoor environments. Outdoor applications require an IP rated luminaire.
The LED lamp must be installed by a professional electrician.
Once installed, do not change any components or structure of the LED lamp.
This lamp is designed for general lighting service (excluding e.g., explosive atmospheres).
Ambient Temperature (TA): -20 °C to 50 °C (-4 °F to 122 °F).
This lamp may not be suitable for use in all applications where a traditional fluorescent lamp has been used. The temperature range of this lamp is more restricted. In case of doubt regarding the suitability of the application, the manufacturer of this lamp should be consulted.
No modifications of the luminaire with which the LED lamp is to be used are to be made.
Compatibility and Replacement
This lamp is designed to replace:
- 600mm: T8 G13 18W
- 1200mm: T8 G13 36W
- 1500mm: T8 G13 58W
Series connected lamps require AC direct rewiring (Typically in 600mm installations).
Specifications
| Length (mm) | Base | Power (W) | Voltage (V) | Input Current (mA) | Colour Temperature (K) |
|---|---|---|---|---|---|
| 600 | G13 | 6,7 | 220-240 | 32 | 3000 / 4000 / 5000 |
| 1200 | G13 | 12,9 | 220-240 | 61 | 3000 / 4000 / 5000 / 6500 |
| 1200 | G13 | 15,3 | 220-240 | 70 | 3000 / 4000 / 5000 |
| 1500 | G13 | 18,8 | 220-240 | 87 | 3000 / 4000 / 5000 / 6500 |
| 1500 | G13 | 24,1 | 220-240 | 108 | 3000 / 4000 / 5000 |
Installation Steps
Switch off the electricity. [Power Off Symbol]
Rotate the lamp 90°.
Remove the conventional lamp.
Remove the starter.
Click the LED replacement starter into the starter holder.
Insert the LED lamp into the lampholder.
Secure the position by turning the lamp by 90°.
Switch on electricity. [Power On Symbol]
Check that the light switches on.
Product Certifications and Symbols
European Norms Electrical Certification: This product complies with European safety standards.
Conventional Control Gear: This product is designed for use with conventional control gear (magnetic ballast).
Lamp not suitable for emergency operation: This lamp is not approved for use in emergency lighting systems.
The LED tube is only suitable for 50/60 Hz operation.
Dimming not allowed: Dimming is not permitted with this lamp.
Operation only with LED replacement starter (included in the LEDTUBE packaging) (EM mode).
Lamps to be used in dry conditions or in a luminaire that provides protection.
Do not dispose of in household waste. Dispose of electrical waste for recycling. [Recycle Symbol]
Hållbara & innovativa belysningslösningar | Aura Light
