Product Identification
IP20 ? CE ✅ CLASS II ?
Please read the instruction manual before installation and keep it for future reference.
Intended Use
The luminaire is intended for standard use in dry environments. The luminaire is not suitable for outdoor environments.
Note: The icons IP20, CE, and CLASS II indicate the product's protection rating, conformity, and safety class respectively.
Driver Compatibility
The luminaire shall only be used together with SELV drivers.
Safety Instructions
These instructions assume expert knowledge corresponding to a completed professional education as an electrician.
- Never work when voltage is present on the luminaire. ⚠️ Caution - Risk of fatal injury!
- Ensure that the luminaire is undamaged before installation and commissioning!
- The manufacturer is not liable for any damage caused by incorrect or unauthorized use or by non-observance of these instructions.
- Work on the luminaire (installation, maintenance, servicing, troubleshooting) may only be carried out by an authorized electrician.
DALI Interface
DALI: Basic insulation between supply-and control terminals.
Installation Guide
Follow these steps for installation:
- Step 1: Preparation and Wiring
Diagram shows a circuit breaker switch in the 'Off' position. The next image shows a person installing a fixture into a suspended ceiling grid. The final image in this step shows a person connecting wires to the fixture.
- Step 2: Electrical Connections
Diagram shows close-ups of electrical connection terminals. Wires are inserted into terminals. The terminals are labeled "L N (Da+ Da-)".
- Step 3: Ceiling Mounting
Diagram shows the panel light being inserted upwards into a ceiling grid opening.
- Step 4: Completion
Diagram shows the "Complete" installation of the Brahe Panel luminaire in the ceiling.
Dimensions
Dimensions are provided for two panel sizes:
Panel Size 1
Overall dimensions: 595mm x 595mm.
Visible light area: Consists of two distinct rectangular sections.
Fixture depth: 61mm.
Mounting depth: 43mm.
Diagram shows a 595mm x 595mm panel with a 43mm mounting depth and 61mm fixture depth, featuring two light-emitting sections.
Panel Size 2
Overall dimensions: 620mm x 620mm.
Visible light area: Consists of two distinct rectangular sections.
Fixture depth: 61mm.
Mounting depth: 43mm.
Diagram shows a 620mm x 620mm panel with a 43mm mounting depth and 61mm fixture depth, featuring two light-emitting sections.
Warranty Policy
Aura Light offers a 5-year warranty regarding manufacturing and material defects in products manufactured and/or sold by Aura Light. For product information, visit www.auralight.com.
Note: The icons LED ? ? indicate the product uses LED technology.
Important Notes
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent.
- If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by the manufacturer or his service agent.
Technical Information
Technical information can be found at www.auralight.com.
Hållbara & innovativa belysningslösningar | Aura Light
