Issue 5
TCH2 CHRYSLER JEEP COMMANDER 2006>
CHRYSLER JEEP GRAND CHEROKEE 2005 - 2011
Parts List
| Item | Qty | Description | Item | Qty | Description |
|---|---|---|---|---|---|
| A | 1 | Towbar | C | 2 | M16 x 55 Bolts, Nuts & S/P Washers |
| B | 1 | Coupling Spacer | D | 4 | M12 x 100 Grade 10.9 Bolts & S/P Washers |
| E | 4 | 12 x 25 Flat Washers |
Installation Steps
- Lower the spare wheel.
- Locate Item A onto rear crossmember and using Item D and Item E bolt into place.
- Replace the spare wheel.
- Using Item C bolt the ball bracket (not supplied in this kit) to the mounting plate.
NOTE: Item B is used to space the Towball out if required.
Diagram
A line drawing illustrates the TCH2 towbar assembly. The main towbar component (labeled A) is shown mounted to a vehicle's rear crossmember. Bolts labeled D and E are depicted securing this component. A separate ball bracket is shown, designed to be attached to a mounting plate using bolts labeled C. Item B, a coupling spacer, is shown as an optional component to adjust the towball's position.
Notes
- Recommended torque setting for M12 Grade 10.9 is 139 Nm. (For other torque settings, see notes overleaf).
- Nose load limits and vehicle manufacturers' trailer/caravan weight limits must be observed.
