Mcombo Accent Chair with Ottoman
Model: 6151-4079
Congratulations!
The Mcombo Accent Chair with ottoman is a name synonymous with classic design and quality. Our products are sourced directly from the factory, eliminating middlemen costs. This Accent Chair with ottoman provides a high-quality seating solution to enhance comfortable feelings for your enjoyment.
Warranty Information
- All warranties are valid for the original purchaser from MCOMBO ONLY.
- MCOMBO will replace defective parts or send a replacement item if the warranty parts have not been subjected to misuse, abuse, or improper service by the consumer, such as damaged wiring due to negligence or improper operation.
- All Mcombo chairs come with a 30-day return/replace policy. During this period, Mcombo will cover the shipping cost for returns and replacements of defective or damaged items by providing a pre-paid return label or arranging a pick-up service for customer convenience.
Parts List
- A: Seat Cushion and Backrest x1
- B: Lumbar Pillow x1
- C: Screws M6*20mm x28
- D: Wrench x1
- E: Chair Legs (right) x2
- F: Chair Legs (left) x2
- G: Screws M8*25mm x2
- H: Spanner x1
- I: Ottoman Cushion x1
- J: Ottoman Legs x4
Assembly Instructions
Please remove all protective foam before assembly.
Step 1: Attach Chair Legs
Fasten the 4 chair legs (parts #E and #F) to the underside of the seat cushion (part #A) using screws (parts #C and #D). Diagram Description: An underside view of the chair's seat cushion shows four legs being attached to the corners with screws. An inset shows a close-up of a leg attachment.
Step 2: Attach Backrest to Seat
Fasten the backrest and seat cushion together using screws (parts #G, #D, and #H). Diagram Description: A side view of the chair shows the backrest being attached to the seat cushion with screws.
Step 3: Attach Ottoman Legs
Fasten the 4 ottoman legs (part #J) to the underside of the ottoman cushion (part #I) using screws (parts #C and #D). Diagram Description: An underside view of the ottoman cushion shows four legs being attached to the corners with screws. An inset shows a close-up of a leg attachment.
Step 4: Place Lumbar Pillow
Finally, place the lumbar pillow (part #B) on the assembled chair or ottoman. Enjoy your new Mcombo Accent Chair! Diagram Description: A line drawing shows the fully assembled chair and ottoman with the lumbar pillow positioned on the chair.
Kindly Reminder
If you have any questions about the product or its use, please feel free to contact sales@mcombo.com.