Congratulations!
Mcombo Living Room Chairs are synonymous with classic design, value, and quality. Our products are sourced directly from the factory, eliminating middlemen costs. These chairs offer a high-quality seating solution to enhance comfort and enjoyment in your living space.
Warranty Information
- All warranties are valid for the original purchaser from MCOMBO ONLY ®.
- MCOMBO will replace defective parts or send replacement items if the warranty parts have not been subjected to misuse, abuse, or improper service by the consumer (e.g., damaged wire due to negligence or improper operation).
- All Mcombo recliners come with a 30-day return/replace policy. During this period, Mcombo will cover shipping costs for returns and replacements of defective or damaged items by providing a pre-paid return label or pick-up service for customer convenience.
Parts List
Please identify all parts before assembly. Ensure all protective foam is removed.
A: Back Pad (1 piece)
B: Seat Pad (1 piece)
C: Ottoman Pad (1 piece)
D: Seat Cushion (1 piece)
E: Ottoman Cushion (1 piece)
F: Back Cushion (1 piece)
G: Back Frame (1 piece)
H: Left Chair Leg (1 piece)
I: Right Chair Leg (1 piece)
J: Crossbars (3 pieces)
K: Ottoman Legs (4 pieces)
L: Screws M8*30mm (2 pieces)
M: Screws M6*20mm (16 pieces)
N: Screws M6*14mm (2 pieces)
O: Screws M6*12mm (4 pieces)
P: Allen Wrench M6 (1 piece)
Assembly Instructions
Ottoman Assembly
Step 1
Use Screws #M (16 pieces) to fix the Ottoman Legs #K (4 pieces) onto the Ottoman Pad #C. Tighten with the Allen Wrench #P.
Diagram shows the underside of the Ottoman Pad (C) with four holes where the Ottoman Legs (K) are attached using Screws (M) and tightened with the Allen Wrench (P).
Chair Assembly
Step 2
Use Screws #O (4 pieces) to connect the Left Chair Leg #H to the side of a Crossbar #J (1 of 3). Tighten with the Allen Wrench #P.
Diagram shows the underside of the chair frame. The Left Chair Leg (H) is being attached to a Crossbar (J) using Screws (O) and the Allen Wrench (P).
Step 3
Use Screws #O (4 pieces) to connect the Right Chair Leg #I to the other side of the Crossbar #J (1 of 3). Tighten with the Allen Wrench #P.
Diagram shows the underside of the chair frame. The Right Chair Leg (I) is being attached to the same Crossbar (J) as in Step 2, using Screws (O) and the Allen Wrench (P). The bottom frame of the chair is now complete.
Step 4
Use Screws #M (16 pieces) to fix the Seat Pad #B onto the bottom frame of the chair. Tighten with the Allen Wrench #P.
Diagram shows the underside of the Seat Pad (B) being attached to the assembled bottom frame of the chair using Screws (M) and the Allen Wrench (P).
Tip: An inverted installation may be easier to operate.
Step 5
Place the bottom frame of the chair in its normal upright position. Use Screws #N (2 pieces) to connect the Back Frame #G to the top of the Left Chair Leg #H and the Right Chair Leg #I. Tighten with the Allen Wrench #P.
Diagram shows the chair frame upright. The Back Frame (G) is being attached to the upper sections of the Left Chair Leg (H) and Right Chair Leg (I) using Screws (N) and the Allen Wrench (P).
Step 6
Use Screws #L (2 pieces) to fix the Back Pad #A onto the Seat Pad #B. Tighten with the Allen Wrench #P.
Diagram shows the underside of the Seat Pad (B) where the Back Pad (A) is attached using Screws (L) and the Allen Wrench (P).
Tip: An inverted installation may be easier to operate.
Step 7
Place the Seat Cushion #D on the Seat Pad #B. Place the Ottoman Cushion #E on the Ottoman Pad #C. Place the Back Cushion #F on the Back Pad #A.
Diagram shows the fully assembled chair and ottoman with all cushions (D, E, F) placed on their respective pads (B, C, A).
Congratulations!
Now you can relax your body on this chair and even decorate your living room.
Kindly Reminder
If you have any questions about the product or its use, please feel free to contact sales@mcombo.com.
MCombo
