Mcombo Accent Chair with Ottoman
Model: 6151-4400
Congratulations!
Mcombo Accent Chair with ottoman is a name synonymous with classic design and the carrier of value and quality. Our products are directly from factory and eliminated the cost of middlemen. The Accent Chair with ottoman is a high-quality shading solution to enhance comfortable feelings as you try to enjoy the nice day.
Warranty
- All warranties are to the original purchaser from MCOMBO ONLY ®
- MCOMBO® will replace the defective parts or send replacement item provided that the warranty parts have not been subjected to misuse, abuse or improper service by the consumer, for example, damaged wire arising in consequence of negligence or improper operation.
- MCOMBO® All of chairs come with a 30-day return/replace policy. During this time, we will cover the shipping cost of return and replacement for defective and damaged item, through provide pre-paid return label or pick up service for customer's convenience.
Parts List
| Part Label | Description | Quantity |
|---|---|---|
| A | Seat Cushion and Backrest | x1 |
| B | Lumbar Pillow | x1 |
| C | Screws M6*20mm | x28 |
| D | Wrench | x1 |
| E | Chair Legs (right) | x2 |
| F | Chair Legs (left) | x2 |
| G | Screws M8*25mm | x2 |
| H | Spanner | x1 |
| I | Ottoman Cushion | x1 |
| J | Ottoman Legs | x4 |
Diagram Descriptions for Parts:
- Part A: Depicts a combined seat and backrest cushion.
- Part B: Shows a rectangular lumbar pillow.
- Part C: Illustrates a screw with M6 thread and 20mm length.
- Part D: Shows an L-shaped wrench.
- Part E: Depicts a chair leg designed for the right side of the chair.
- Part F: Depicts a chair leg designed for the left side of the chair.
- Part G: Illustrates a screw with M8 thread and 25mm length.
- Part H: Shows a spanner (also known as a wrench).
- Part I: Depicts an oval-shaped cushion for the ottoman.
- Part J: Shows a leg for the ottoman.
Assembly Instructions
Please remove all protective foam.
Assemble the Chair
Step 1
Fasten the 4 chair legs (Parts E - right, F - left) to the underside of the seat cushion (Part A) using screws (Part C) and the wrench (Part D). An inset shows a close-up of the attachment points.
Step 2
Attach the backrest to the seat cushion using screws (Part G), the wrench (Part D), and the spanner (Part H). An inset shows a close-up of the connection.
Assemble the Ottoman
Step 3
Fasten the 4 ottoman legs (Part J) to the underside of the ottoman cushion (Part I) using screws (Part C) and the wrench (Part D). An inset shows a close-up of the attachment points.
Step 4
Place the lumbar pillow (Part B) on the assembled chair or ottoman.
Contact Information
Kindly Reminder: If you have any questions about the product or use, please feel free to contact Mcombo.
- Tell Free (US): 3235971109
- Website: www.mcombo.com
- Warranty Claim: sales@mcombo.com
- Sales & Technical Questions: sales@mcombo.com, sales@exacme.com
