Assembly Instructions
Please remove all protective foam.
Step 1
Use screw #M to fix Seat Cushion #A and Chair Base #D with Allen Wrench #L.
Diagram Description: The illustration shows the Seat Cushion (labeled A) and the Chair Base (labeled D) being joined. A screw (labeled M) is inserted through the base and into the cushion, tightened by an Allen Wrench (labeled L).
Step 2
Connect the Back Frame #B and the chair base with Allen Wrench #L using Screws #J and Nuts #K. Insert 2 Washers #N between the screws and nuts.
Diagram Description: The illustration depicts the Back Frame (labeled B) being attached to the chair base assembly. Screws (labeled J) and Nuts (labeled K) are used, with two Washers (labeled N) placed between them. An Allen Wrench (labeled L) is shown for tightening.
Step 3
Place the Back Cushion #C onto the Back Frame #B.
Diagram Description: This step shows the Back Cushion (labeled C) being positioned and attached to the Back Frame (labeled B).
Step 4
Part 1: Use Screws #M to attach the Ottoman Cushion #H to the Ottoman Base #F (left) and #G (right) using wrench #L.
Part 2: Use Screws #J to secure the Crossbar #E to the left #F and right #G base frames of the ottoman.
Diagram Description: The illustration details the ottoman assembly. In Part 1, the Ottoman Cushion (labeled H) is affixed to the left Ottoman Base (labeled F) and right Ottoman Base (labeled G) using Screws (labeled M) and the wrench (labeled L). In Part 2, the Crossbar (labeled E) connects the left and right Ottoman Bases (F and G) using Screws (labeled J) and the wrench (labeled L).