Ecler VEO-XTI1CG2 / VEO-XRI1CG2 User Manual

Introduction to Ecler Video Extenders

This user manual provides comprehensive guidance for the Ecler VEO-XTI1CG2 transmitter and VEO-XRI1CG2 receiver. These devices are H.265 / H.264 over IP extenders designed for professional, high-quality video distribution. They support HDMI® signals over 1Gb Ethernet networks with up to 1080p@60Hz video resolution, offering a low-bandwidth solution ideal for various applications including educational, commercial, and corporate installations.

Key Features and Capabilities

The VEO-XTI1CG2 and VEO-XRI1CG2 offer a range of advanced features:

• High-resolution HDMI® support (up to 1920x1200p@60Hz 4:4:4).
• Long-distance signal transmission up to 100m over Cat5e/6/7 cables.
• Flexible network configuration supporting unicast and multicast over 1Gb networks.
• Video wall compositing capabilities for up to 9x9 setups.
• Audio embedding and extraction features.
• Support for mainstream and sub-stream encoding modes.
• RS-232, TCP/IP, and Web GUI management options.
• HDCP 1.4 compliance and PoE function support.

Getting Started and Operation

This manual details the setup and operation of the VEO-XTI1CG2 and VEO-XRI1CG2 units. It covers essential aspects such as:

• Precautions and safety instructions.
• Package contents and initial setup.
• Network requirements and IP address configuration.
• Web interface configuration for managing video and audio settings.
• Panel functions for both transmitter and receiver units.
• Remote control options via RS-232 and advanced network management.
• Utilizing the Ecler VEO1CG2 Discovery App for device detection and management.

For detailed technical specifications, installation options, and troubleshooting, please refer to the relevant sections within this manual.

For further assistance or technical inquiries, Ecler recommends contacting your local supplier or distributor, or visiting the official Ecler website at www.ecler.com.