Singtel Wi-Fi 6 Router RT5703W Quick Installation Guide
Your quick and easy step-by-step guide to setting up your Fibre Broadband.
What's in the Box
- Singtel Wi-Fi 6 Router x 1
- Quick Installation Guide x 1
- Power Cable x 1 (?)
- Ethernet Cable x 1 (? for connecting device to router)
Overview
Singtel Wi-Fi 6 Router RT5703W
Front View: Features include [WPS Button], Power LED, Internet LED, LAN LED, Mesh LED.
Back View: Features include [LAN Ports], [WAN Port], [USB 3.0 Port], [Reset Button], [Power Button] (ON/OFF).
Installing Your Router
Please set up your Wi-Fi 6 Router as per the diagram below:
Diagram Description: Illustrates the physical connections: Fibre Termination Point (?️) connects to Terminal (ONT) (?), which then connects via Ethernet cable (?) to the WAN port of the Wi-Fi 6 Router (?). A Singtel TV Set-Top Box (?) is also shown.
- Insert the Power Adapter into the Wi-Fi Router's Power Port and plug it into the power outlet.
- Connect one end of the Ethernet cable to the LAN 1 port on the ONT and the other to the WAN port of the Router.
- Power up the Router and wait for the Internet LED to light up.
- Connect your computer or mobile device to the Router via Wi-Fi (?) using the Username and Password printed on the device label, or use the Ethernet cable (?) to connect your computer to the Router's LAN port.
Optimal Placement
- The Router (?) should be placed at a central location within the office, and preferably unobstructed.
- For optimal connection and to eliminate Wi-Fi dead spots, consider adding Singtel Wi-Fi 6 Mesh Extenders (?) to the office network. Speak to a Singtel representative for more information.
Diagram Description: A floor plan shows a Router placed centrally, with two Mesh Extenders positioned to cover different areas, demonstrating optimal coverage.
How to Configure Your Wi-Fi Settings & Troubleshooting
Scan the QR code for detailed instructions on configuring your Wi-Fi settings.
Troubleshooting Steps if you encounter connectivity issues:
- Turn off and turn on your Wi-Fi on your handphone or device to reset the Wi-Fi connection.
- If the issue persists, reboot the router.
LED Indicator
| LED | LED Behaviour | Device Status |
|---|---|---|
| Power | White ON | Router device is ready |
| Red ON | System failure | |
| Red Flashing | Router is booting up | |
| Off | Power off | |
| White/Red alt. Flashing | Firmware upgrade | |
| White Flashing | Factory Reset | |
| Internet | White ON | WAN connection is functioning OK |
| White Flashing | Obtaining IP address | |
| Red ON | Internet connection failure | |
| Off | No internet link | |
| LAN | White ON | Ethernet connection established |
| Off | No LAN connection on the port | |
| Mesh | White ON | Mesh Network Connection |
| Off | No mesh connectivity | |
| White Flashing | Mesh Pairing |
