Singtel WiFi 7 Router Quick Installation Guide

Setting Up Additional Routers (Mesh Network)

This section guides you on how to pair additional Singtel WiFi 7 Routers to create a mesh network.

Method 1: Pair via LAN Cable

Confirm the LED on the main router (connected to ONT/ONR) is solid green.
Place the additional device next to the main router and wait until its LED is flashing blue.
Connect a LAN cable from any LAN port on the main router to any available port on the second device. Wait for both units' LEDs to turn green, indicating successful pairing.
Reposition your second router anywhere in your house to boost coverage.

Method 2: Pair via WPS

Confirm the LED on the main router (connected to ONT/ONR) is solid green.
Place the additional device next to the main router and wait until its LED is flashing blue.
Press and hold the WPS button for approximately 5 seconds on the main router, then do the same on the additional device.
Both LEDs will flash blue rapidly to indicate pairing. Wait at least 5 minutes; both LEDs will turn green when successfully paired.

What's in the Box

Router x 1
Quick Installation Guide x 1
Power Cable x 1
Ethernet Cable x 1

Overview

This section details the router's ports, buttons, and LED indicators.

Router Ports & Buttons:

WPS Button
Reset Button
2x GbE LAN Ports
2.5G LAN Port
2.5G WAN/LAN Port
USB 3.0 Port
Power Port

LED Indicator Status:

LED Colour	Device Status
Flashing yellow	Starting up or resetting
Yellow	Connection quality is normal
Flashing blue	Ready for setup
Fast flashing blue	Establishing a WPS or mesh connection
Blue	Device is set up but internet unavailable
Flashing green	Firmware is upgrading
Green	Device is set up and connected
Flashing red	Lost connection

Device Model: WiFi 7 Router HB611-SGST, Powered by TP-Link.

Installing the Router

Singtel Fibre Broadband homes have two main setup configurations. Please identify your equipment type.

Router (i) - Setup with Optical Network Terminal (ONT)

In this setup, the Fibre Termination Point connects directly to an Optical Network Terminal (ONT). The ONT then connects to the Singtel TV Set-Top Box and the WiFi 7 Router.

Router (ii) - Setup with Optional Network Router (ONR)

In this setup, the Fibre Termination Point connects to an Optional Network Router (ONR). The ONR then connects to the Singtel TV Set-Top Box and the WiFi 7 Router.

Installation Steps:

Insert the Power Adapter into the WiFi Router’s Power Port and plug it into the power outlet.
Connect one end of the Ethernet cable to the LAN 1 port on the ONT or ONR. Connect the other end to the WAN port of the router. If you are using a XGS ONR, connect the Ethernet cable to the 10G LAN port on the ONR.
Power up the router. It may take up to 5 minutes for the connection to establish, indicated by the LED turning solid green. Avoid tampering with the router during this setup process.
A solid green LED signifies that your router has been successfully set up and is ready for use, either via WiFi or a wired LAN connection through the Ethernet port. The default WiFi username and password are printed on the device label located on the bottom of the router.

Optimal Placement

Position the router in a central location within your home, ensuring it is unobstructed for the best signal coverage.
To effectively eliminate WiFi dead spots and achieve optimal connection, consider adding more Singtel WiFi 7 Routers to your network.

For further assistance, speak to a Singtel representative.

Device Safety

Keep the router away from heat sources, dusty, or damp environments.
Before installation, turn off the power, unplug the power cord from the outlet, and ensure your hands are dry.
Do not plug a phone jack connector into an Ethernet port, as this may damage the router.

Troubleshooting Steps

Follow these steps if you encounter connectivity issues:

Turn your device's WiFi off and on again to reset the connection.
If the issue persists, reboot the router by unplugging its power and plugging it back in.
To perform a factory reset, press and hold the reset button located on the bottom of the router for at least 5 seconds, then release. The router will revert to its default factory settings.

For more information and support, visit singtel.com/routers-support.

	Singtel Fibre Broadband Plan Promotions and Terms Details of Singtel's Fibre Broadband plan promotions, including bundle offers, pricing, included equipment, and terms and conditions. Features a 5Gbps Mesh Plan with various bundled subscriptions and shopping vouchers.
	Singtel Wi-Fi 6 Mesh Extender Quick Installation Guide Step-by-step guide for setting up Singtel Wi-Fi 6 Mesh Extender (WE620242) to enhance your home broadband experience.
	Singtel Fibre Broadband Promotions and Terms & Conditions Detailed information on Singtel's Fibre Broadband offers, including speed ranges, 10Gbps Mesh Plan details, and bundled services like Microsoft 365, Amazon Prime, and Disney+. Learn about eligibility, terms, and conditions valid until September 2025.
	Singtel Promotions Terms & Conditions This document outlines the terms and conditions for various Singtel promotions, including mobile plans, data add-ons, handsets, devices, broadband, and other services. It details eligibility criteria, pricing, contract durations, and specific offer details.
	Singtel XGSPON Optical Network Router Quick Installation Guide A quick installation guide for the Singtel XGSPON Optical Network Router (ONR), covering setup, connection, and LED status indicators.
	Singtel Fibre Broadband Promotions and Terms & Conditions Explore Singtel's latest Fibre Broadband promotions, including 3Gbps and 10Gbps plans, bundle offers, and lifestyle product discounts. Details on terms, conditions, and eligibility for various Singtel services.
	Singtel Promotions Terms & Conditions Singtel offers a comprehensive range of mobile plans, add-ons, broadband services, and lifestyle products with detailed terms and conditions for each.
	How to Determine if You're Using an ONT or ONR Device A guide from Singtel to help users identify whether their home internet device is an Optical Network Terminal (ONT) or an Optical Network Router (ONR) by comparing it to listed models.