Singtel WiFi 6 Mesh Extender
Quick Installation Guide
What's in the box
- Mesh Extender x 1
- Quick Installation Guide x 1
- Ethernet Cable x 1
- Power Cable x 1
- Ethernet Cable for Connecting Device to Router
Overview
Front View
The front view shows the Power LED, LAN LED, and Mesh LED indicators. It also has a WPS button and a Reset button.
Back View
The back view shows the LAN Ports and the Power ON/OFF switch.
Setting up your Mesh Extenders
Scenario 1: No Mesh Extender Installed
- Connect the LAN port (port 1-4) on the ONR to any LAN port at the back of the Mesh Extender using the Ethernet Cable.
- Insert the Power Adapter into the Mesh Extender's Power Port and plug it into the power outlet. Press the power button on the back of the device if it does not turn on.
- The POWER LED light will start flashing red. Once it turns solid white, the device is ready.
- Connect your computer or mobile device to the Mesh Extender via WiFi using the Username and Password printed on the device label, or use the Ethernet cable to connect your computer to the Mesh Extender's LAN port.
Scenario 2: Wi-Fi 6 Mesh Extender Already Installed
- Connect your new Mesh Extender to a power point close to the installed Mesh and turn it on. Press the power button on the back of the device if it does not turn on.
- Press and hold the WPS button at the back of your installed Mesh for 2 seconds. Then, press and hold the WPS button on the new Mesh Extender. Wait up to 5 minutes for the Mesh LED to turn solid white on both Mesh Extenders.
- Reposition the new Mesh Extender to a location in-between your original Router/Mesh Extender and the area with weak WiFi signal, then switch it on.
Optimal Placement
For optimal connection and to eliminate WiFi deadspots, the placement of each Mesh Extender device should be within line of sight of the next closest device.
Diagram Description: A diagram shows a home layout with a router and two mesh extenders. The router is placed centrally. The first mesh extender is placed in a room adjacent to the router. The second mesh extender is placed in a room further away, but still within a reasonable range of the first mesh extender, indicating a chain of connectivity.
How to Configure your Wi-Fi settings
Scan the QR code for detailed instructions on configuring your Wi-Fi settings.
QR Code Description: A QR code is presented for accessing detailed Wi-Fi configuration instructions.
Troubleshooting Steps if you encounter connectivity issues
- Turn off and then turn on your Wi-Fi on your mobile phone or device to reset the Wi-Fi connection.
- If the issue persists, reboot the router.
LED Indicator Guide
| LED | LED behaviour | Device status |
|---|---|---|
| Power | White ON | Mesh device is ready |
| Power | Red ON | System failure |
| Power | Red Flashing | Mesh is booting up |
| Power | Off | Power off |
| LAN | White/Red alt. Flashing | Firmware upgrade |
| LAN | White Flashing | Factory Reset |
| Mesh | White ON | Ethernet connection established |
| Mesh | Red ON | No LAN connection on the port |
| Mesh | White Flashing | Good signal strength in wireless mesh network (SNR > 25dB) / Wired backhaul |
| Mesh | Off | Weak signal strength in wireless mesh network |
| Mesh | White Flashing | No mesh connectivity |
| Mesh | White Flashing | Mesh Pairing |
