This document provides assembly instructions for the IKEA LÖNSET slatted bed base.
Model Number: AA-1137480-8
Parts List
The following parts are included in the package:
- Part 100006: Slats (Quantity: 24x)
- Part 100229: Frame Connectors (Quantity: 4x)
- Part 109049: End Caps (Quantity: 4x)
- Part 100823: End Caps (Quantity: 4x)
- Part 139219: Support Piece (Quantity: 1x)
Note: Quantities listed are as per the initial diagram. Some parts may be used in specific configurations or as spares.
Assembly Steps
Step 1
Attach two (2x) Part 100006 (slats) to two (2x) Part 100229 (frame connectors). The diagram shows the slats being inserted into slots on the connectors.
Step 2
Continue attaching slats. Attach three (3x) Part 100006 (slats) to the remaining two (2x) Part 100229 (frame connectors).
Step 3
Attach six (6x) Part 100006 (slats) to the frame structure.
Step 4
Attach four (4x) Part 100006 (slats) to the frame structure.
Step 5
Attach two (2x) Part 100006 (slats) to the frame structure.
Step 6
Attach three (3x) Part 100006 (slats) to the frame structure.
Step 7
Attach the end caps. Insert two (2x) Part 100823 and two (2x) Part 109049 into the ends of the assembled frame structure.
Step 8
The assembly is now complete. The diagram shows the fully assembled LÖNSET slatted bed base.
© Inter IKEA Systems B.V. 2014