ACID E-Bike Front Light PRO-E 60 CMPT X-CONNECT
Article Number: 94891
Type Name: PRO E60
K-Number: K 1951
Model Type: Front Light
Technical Specifications
- Light Intensity: 60 Lux
- Luminous Flux: 175 Lumen
- Light Source: LED
- Input Voltage: 12 V (DC)
- Max. Peak Current: 0.3 A
- Wattage: 3.6 W
- Operating Temperature: -25 - +70°C
- Housing: Plastic / Aluminium
- Cable Length: 150 mm
- Plug: X-Connect
- Weight: 48 g
- Dimension: 50.5 x 48.0 x 60.0 mm
- IP Protection Class: IPX4
Product Content
- Headlight with 150 mm light cable and X-Connect plug
- K-reflector with screw (M3 x 8 mm)
Overview & Installation
Mounting On Fork
Use a screw and washer suitable for your fork. If unsure, contact your dealer.
Components needed:
- Fork bracket universal HPP
- Screw M5 x 19 mm
- Nut M5 x 0.8 mm (Wrench size 8)
- Lock Washer (not included in delivery)
Cable Routing
The fork bracket universal HPP offers the possibility to fix the cable.
Connection to Power Supply
The light is switched on and off using the control unit of the power source.
Compatible with CUBE Hybrid Bikes with X-Connect-integration and ACID E-Bike Front Light Cable X-Connect - BOSCH BES3.
Can also be connected to ACID PowerBank.
Product Setting
Correct Setting
IMPORTANT! Usage without K-reflector does not comply with the StVZO (German Road Traffic Licensing Regulations).
Adjust the light cone of the spotlight so that the center of the light cone at 5 meters is half as high as the spotlight itself. The maximum beam distance is 1200mm, with a minimum recommended distance of 400mm.
General Information & Safety
General
Read and keep all instructions. Failure to observe instructions may result in serious injury or damage to the product and vehicle. Keep instructions for future reference and include them when passing the product to a third party.
Explanation of Symbols
- WARNING! Medium risk of hazard, may result in death or serious injury.
- CAUTION! Low risk of hazard, may result in moderate or minor injury.
- NOTICE! Warning of possible damage to property.
- i Useful additional information.
- Nm Use a torque wrench with indicated torque values.
- › Observe indication sound.
Intended Use
This product is intended for mounting on approved vehicles only. Use only as described. Any other use is considered unintended and can lead to accidents or damage. The product is not a toy.
Safety Instructions for Accessories
Assembly: Have assembly done by a dealer. Ensure electrical connections are professional. Check all components for completeness and damage before assembly. Use only intended or included parts. Ensure correct torque values for screw connections, especially for aluminum or carbon fiber components.
Operation: Ensure the light is securely mounted and operational. Never point the light beam into eyes. If unsure, contact your dealer.
Maintenance: Check product and vehicle regularly for wear or loose connections. Do not use if damage is found. LEDs are not interchangeable; replace the entire unit if an LED fails.
Cleaning and Care
NOTICE! Risk of damage!
Do not use aggressive cleaning agents, metal/nylon brushes, or sharp objects. Never use high-pressure cleaners, high air pressure, or alcohol-based liquids. Clean regularly with a damp, soft cloth, possibly with mild detergent.
Storage
Ensure all parts are completely dry before storage. Store in a dry place, protected from direct sunlight.
Disposal
Dispose of packaging sorted by type. Do not dispose of the product with household waste; take it to an electronic waste collection point.
Liability for Material Defects
Contact your dealer for defects. Present proof of purchase and inspection. Use the product according to its intended purpose and follow installation and maintenance guidelines.
Other Information
Visit www.CUBE.eu for news, information, EU Declarations of Conformity, and the latest manuals.
