ACID E-BIKE FRONT LIGHT PRO-E 200 HB X-CONNECT

Technical Data

Product Content

• Headlight with 150 mm light cable and X-Connect plug
• Wireless Remote PRO-E

Mounting Instructions

Mounting Reflector

Step 1

[Info] Important! Usage without K-reflector does not comply with the StVZO.

Step 2

[Diagram Description: Shows a reflector being attached to a mounting bracket using a screw. The bracket itself is then shown being attached to the bike's fork or frame.]

[Screw M2.5 x 6 mm] [2 mm Allen key]

Mounting Wireless Remote PRO-E

Step 1

[Diagram Description: Shows the wireless remote being attached to a handlebar bracket, likely with a clamp or screw mechanism. The bracket is then shown being mounted onto the handlebar.]

[Handlebar Bracket] [Screw M3 x 14/18.5 mm] [2 mm Allen key]

Mounting FPILink Adapter Universal

Step 1

[Diagram Description: Shows the FPILink Adapter Universal being attached to an FPILink-Faceplate using screws.]

[FPILink-Faceplate] [FPILink Adapter Universal] [Screw M5 x 17.5 mm] [4 mm Allen key]

Step 2

[Diagram Description: Shows a spacer being placed, followed by the assembled adapter unit being mounted onto the handlebar using screws.]

[Spacer] [Screw M4 x 10 mm] [2.5 mm Allen key]

Connecting Wireless Remote PRO-E

Step 1

[Diagram Description: Shows the wireless remote unit being connected to the main light unit, indicated by a 'Click!' sound.]

[Click!]

Step 2

[Diagram Description: Shows the remote unit being attached to its mounting bracket.]

[Click!]

Anti-theft Option

Step 1

[Diagram Description: Shows a small screw being inserted into the adapter assembly.]

[Screw M4 x 5 mm] [2.5 mm Allen key]

Step 2

[Diagram Description: Shows the main light unit being attached to the adapter, indicated by a 'Click!' sound.]

[Click!]

Connection to Power Supply

The light is switched on and off using the control unit of the power source.

Compatible with CUBE Hybrid Bikes with X-Connect integration.

Connects with ACID E-Bike Front Light Cable, X-Connect - BOSCH BES3.

Also compatible with ACID PowerBank.

Indicators and Settings

Low Battery Indicator

[Diagram Description: Shows a visual indicator for battery status, with three segments, where one segment is lit, indicating a low battery level.]

Product Setting: Light Cone Adjustment

[Info] Important! Adjust the light cone of the spotlight so that the center of the light cone in 5 meters is half as high as the spotlight itself.

[Diagram Description: Illustrates the correct aiming of the headlight beam. A line shows the beam hitting the ground at a distance of 5 meters. A measurement indicates that the center of the beam at 5 meters should be half the height of the headlight itself from the ground.]

Product Safety Warnings

Heat Generation

[Warning] The housing gets hot during usage; ensure to keep the light at a safe distance from any combustible or flammable materials at all times. Quiescent operation (without cooling via airflow) is possible and will not damage the product. When used stationary, the built-in heat management system will reduce power automatically.

General Information

General

Read and keep the manual. This and other instructions contain important information on assembly, initial operation, and maintenance. Failure to observe instructions may result in serious injury or damage.

Keep instructions for future use. Include all instructions when passing the product to a third party.

Instructions are subject to European legislation. Additional instructions may be needed for delivery outside Europe.

Explanation of Symbols

WARNING!

Medium risk of hazard, potentially leading to death or serious injury if not avoided.

CAUTION!

Low risk of hazard, potentially leading to moderate or minor injury if not avoided.

NOTICE!

Warning of possible damage to property.

[Info] Useful additional information for assembly or operation.

[Info] Read and observe the enclosed instructions.

[Info] Use a torque wrench. Use the torque values indicated in the symbol.

[Info] Observe indication sound.

Intended Use

This product is intended for mounting on approved vehicles only. Ensure your vehicle is suitable for retrofitting. Contact your dealer if unsure.

Product is approved as a light on bikes according to current StVZO.

Use only as described. Other uses may lead to accidents, injury, or damage. Not a toy. Manufacturer/dealer not liable for damage from incorrect mounting or use.

Safety Instructions for Accessories

[Warning] Risk of accidents and injury! Read all safety notes and instructions. Failure to comply can cause accidents, serious injury, and damage.

Safety Instructions for Assembly

CUBE recommends professional assembly by a dealer.

Electrical connection must be done professionally.

Check scope of delivery for completeness before assembly.

Check all components for damage, sharp edges, or burrs before assembly. Do not use if damaged.

Have product and vehicle checked by dealer.

Use only intended/included parts. Other manufacturers' components may affect function.

When combining with other manufacturers' vehicles, check their specifications and compatibility.

Screw connections must be tightened correctly with a torque wrench and correct values.

If inexperienced with torque wrenches, have loose connections checked by a dealer.

Note special torques for aluminum or carbon fiber components. Refer to vehicle manual.

Safety Instructions for Operation

Accessories can significantly influence vehicle characteristics.

Lighting equipment must be mounted correctly, fixed, and permanently ready for operation. Must not be concealed.

Before each ride, check secure connection of light to bracket and bracket to bicycle.

Never point the light beam into eyes.

Contact dealer if unsure or have questions.

Instructions may not cover all vehicle model combinations.

Safety Instructions for Maintenance

Prevent malfunctions due to wear, fatigue, or loose connections.

Check product and vehicle regularly. Do not use if excessive wear or loose connections are found.

Do not use vehicle if cracks, deformation, or color changes are noticed. Have vehicle inspected by dealer immediately if these are found.

LEDs are not interchangeable. Replace entire light if an LED fails.

Cleaning and Care

[Notice] Risk of damage! Improper handling of cleaning agents can cause damage.

Do not use aggressive cleaning agents, brushes with metal/nylon bristles, or sharp/metallic cleaning objects (knives, spatulas). These can damage surfaces.

Never use high-pressure cleaners, high air pressure, or alcohol-containing liquids. Do not use aggressive cleaners (including alcohol).

Clean regularly with a damp, soft cloth (mild detergent if necessary).

Storage

All parts must be completely dry before storage.

Always store the product in a dry place.

Protect the product from direct sunlight.

Disposal

Dispose of packaging sorted by type (cardboard to paper, films/plastic to recyclables).

Do not dispose of the product with normal household waste. Dispose of only at an electronic waste collection point. Contact your local municipality for disposal options.

Liability for Material Defects

If defects occur, contact your dealer. Present proof of purchase and inspection for smooth processing. Keep these safe.

For long service life, use only as intended. Observe vehicle operating instructions.

Observe installation instructions (especially screw torques) and prescribed maintenance intervals.

Other Information

Visit www.CUBE.eu for news, information, EU Declaration of Conformity, and dealer addresses.