Important Information
IMPORTANT: RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
This product is intended for domestic use only.
Instructions for use:
- Put the sofa stably on a flat floor.
- Stay away from open flames and heat sources.
- Avoid overloading the sofa.
Precautions before assembly:
- Prepare a clean and dry mounting area.
- Verify that the product is not damaged.
- Check that none of the pieces are missing.
Maintenance:
- Clean with a soft fabric.
- Check the seating regularly.
Storage conditions:
- The fabric should be stored completely dry, in a clean and dry place to avoid the risks of mold.
Beware of crushing and cutting hazards during assembly.
The manufacturer declines all responsibility in case of damages due to a bad installation or weathering.
If the seating is fitted with powered seat height adjustments, only trained personnel may replace or repair those components.
Parts List
Part Label | Description | Quantity |
---|---|---|
A | Main seat/backrest base | 1 |
B | Armrest cushions | 2 |
C | Legs | 4 |
D | Support beam/bar | 1 |
Hardware List
Part Label | Description | Quantity |
---|---|---|
E | Screws (M6*20 mm) | 12 (+1 spare) |
F | Washer | 1 |
G | Circular plate/washer | 1 |
H | Allen key | 1 |
Assembly Instructions
Step 1: Attach Legs and Support Beam
1. Position the main seat/backrest base (A) upside down. Attach the four legs (C) and the support beam (D) to the designated locations on the underside of the base.
Step 2: Secure Components with Hardware
2. Use the screws (E), washers (F, G), and the Allen key (H) to securely fasten the legs (C) and support beam (D) to the main base (A). Ensure all connections are tight.
Step 3: Place Armrest Cushions
3. Place the armrest cushions (B) onto the designated positions on the sides of the sofa frame.
Step 4: Sofa Configuration Complete
4. The sofa is now fully assembled and in its primary seating configuration.
Step 5: Adjusting the Backrest
5. To adjust the backrest, [describe action based on visual, e.g., push down on the backrest until it clicks into the desired position].
Note: The visual suggests the backrest can be folded down or adjusted to different angles.
Step 6: Convertible Sofa Bed
6. The sofa can be converted into a bed by [describe action, e.g., folding the backrest down completely].
Note: The diagram shows the sofa in its fully reclined or bed configuration.
Step 7: Final Product
7. The assembly is complete. The product is now ready for use as a sofa or bed.
Customer Support (USA)
For any questions or assistance, please contact our customer care center:
Phone: 001-877-644-9366
Email: customerservice@aosom.com
Importer: Aosom LLC
Address: 27150 SW Kinsman Rd Wilsonville, OR 97070 USA
Origin: MADE IN CHINA