Next Level Racing Go Kart Plus

Instruction Manual

Your Sim Racing Journey Starts Here

We know you're eager to start racing! Take your time with the instructions and follow this guide to assemble your product. You'll be setting yourself up for success by following the instruction booklet to fully optimize your product.

Watch the assembly video: [Assembly Video Link]

Follow us on social media: @next_level_racing, @nextlevelracingOfficial, @nextlvlracing, Next Level Racing. Contact support: support@nextlevelracing.com

Pre-Race Checks & Assembly Tips

Please do not use power tools for assembly as over-tightening can damage your frame.
Do not force parts together.
Avoid cross-threading threaded items.
If in doubt, consult the installation video or contact support@nextlevelracing.com.
Hand wash seat cover separately in cold water only.

WARNING: CHOKING HAZARD - Small parts not for children under 3 years or any individuals who have a tendency to place inedible objects in their mouths. ⚠️

In the Box

(Note: Some items come with rust-resistant coating)

1 x Left Pedal Frame
1 x Right Pedal Frame
1 x Pedal Plate
1 x Centre Frame
1 x Rear Frame
1 x Centre Pole Base
1 x Centre Pole
1 x Wheel Plate
1 x Left Seat Frame
1 x Right Seat Frame
1 x Seat Cross Brace
1 x Go Kart Seat
1 x Seat Cover
2 x Frame Brace
1 x Front Bumper
1 x Front Bumper Mount
1 x Rear Bumper Mount
4 x M8 Knobs
9 x Flat Feet
5 x Foot Spacer
1 x ButtKicker Mount
8 x Castor Wheel
4 x End Caps
8 x M8 20mm Socket Head Bolts
1 x M10 20mm Socket Head Bolts
2 x M8 12mm Bolts
30 x M8 16mm Bolts
10 x M8 20mm Bolts
2 x M8 30mm Bolts
4 x M8 40mm Bolts
44 x M8 Ø20mm Washers
3 x M8 Ø30mm Washers
3 x M8 Ø35mm Washers
17 x M8 Flange Nut
1 x M10 Allen Key
1 x M8 Allen Key
1 x M6 Allen Key
1 x 13mm Spanner
1 x 14mm Wrench
8 x Velcro Ties
3 x Sticker Sheets

Mounting Locations

Wheel Plate

Diagram showing various mounting points on the wheel plate. Refer to the product legend for compatibility.

Product Legend:
• MOZA R5 / R9 / R16 / R21
• Fanatec DD1 / DD2 / CSL DD / DD Pro
• Logitech G Pro / G25 / G27 / G29 / G902 / G923
• Thrustmaster T-818 / T500 RS / TGT / TSPC / TX
• Simucube (with bottom mounting bracket)
• Simagic Alpha
• Nintendo Mario Kart
• SimXperience Accuforce Pro

Assembly Steps

Step 01

Align the nut inserts on the Right Pedal Frame with the mounting holes on the Left Pedal Frame. Bolt through to the nut insert on the underside of the frame and secure with one M8 Bolt and Washer. [Parts: 1x Left Pedal Frame, 1x Right Pedal Frame, 1x M8 16mm Bolt, 1x M8 Ø20mm Washer]

Step 02

Align the nut inserts on the Right and Left Pedal Frames with the mounting holes on the Centre Frame. Bolt through and secure with 4 x M8 Bolts and Washers. [Parts: 1x Centre Frame, 4x M8 16mm Bolts, 4x M8 Ø20mm Washers]

Step 03

Align the nut inserts on the Centre Frame with the mounting holes on the Rear Frame. Bolt through and secure with 4 x M8 Bolts and Washers. [Parts: 1x Rear Frame, 4x M8 16mm Bolts, 4x M8 Ø20mm Washers]

Step 04

Align the nut inserts on the Pedal Plate with the slots on the Right and Left Pedal Frames. Bolt through and secure with 4 x NLR Knobs. [Parts: 1x Pedal Plate, 4x M8 Knobs] (Note: If using Load Cell Pedals, replace M8 Knobs with M8 20mm Bolts and Washers supplied).

Step 05

Flip the assembly upside down. Align 5 x Foot Spacers and 2 x Frame Braces with the footing mounts on the bottom of the cockpit. Install 9 x Flat Feet or 8 x Castor Wheels into the mounting points. [Parts: 9x Flat Feet or 8x Castor Wheels, 2x Frame Braces, 5x Foot Spacers] (Note: If using Castor Wheels, leave middle rear mount empty).

Step 06

Align the mounting holes on the Centre Pole Base with the nut inserts on the Centre Frame. Bolt through and secure with 4 x M8 Bolts and Washers. [Parts: 1x Centre Pole Base, 4x M8 16mm Bolts, 4x M8 Ø20mm Washers]

Step 07

Align the nut inserts on the Centre Pole with the holes on the Centre Pole Base. Bolt through and secure with 4 x M8 Bolts and Washers. [Parts: 1x Centre Pole, 4x M8 16mm Bolts, 4x M8 Ø20mm Washers] (Tip: For high force feedback, use additional spare M8 16mm bolts on Centre Pole).

Step 08

Align the mounting holes on the Wheel Plate with the nut inserts on the Centre Pole. Bolt through and secure with 4 x M8 Bolts and Washers. [Parts: 1x Wheel Plate, 4x M8 16mm Bolts, 4x M8 Ø20mm Washers]

Step 09

Align the mounting holes on the Left and Right Seat Frames with the nut inserts on the Go Kart Seat. Align 2 x Ø30mm and 2 x Ø35mm washers between Seat Frames and Seat. Bolt through and secure with 4 x M8 Bolts and Ø20mm Washers. (Use 2 x M8 30mm Bolts for the upper mounts and 2 x M8 12mm Bolts for the lower mounts). [Parts: 1x Go Kart Seat, 1x Left Seat Frame, 1x Right Seat Frame, 2x M8 30mm Bolts, 2x M8 12mm Bolts, 4x M8 Ø20mm Washers, 2x M8 Ø30mm Washers, 2x M8 Ø35mm Washers]

Step 10

Align the mounting holes on the Seat Cross Brace with the through holes on the Left and Right Seat Frames. Bolt through and secure with 4 x M8 Bolts, Washers, and Flange Nuts. [Parts: 1x Seat Cross Brace, 4x M8 40mm Bolts, 4x M8 Ø20mm Washers, 4x M8 Flange Nuts]

Step 11

Install 4 x End Caps onto the Left and Right Seat Frames. [Parts: 4x End Caps]

Step 12

Pull Seat Slider Handle upwards and slide Seat Slider Assembly forward to access front mounting holes. [Parts: NIL]

Step 13

Align the mounting slots on the Left and Right Seat Frame with the middle mounting holes on the front of the Seat Slider Assembly. [Parts: NIL]

Step 14

Bolt through the front holes and secure with 2 x M8 Bolts, Washers, and Flange Nuts. Pull the Seat Slider Handle upwards and slide the seat backwards when done. [Parts: 2x M8 20mm Bolts, 2x M8 Ø20mm Washers, 2x M8 Flange Nuts]

Step 15

Bolt through the rear holes and secure with 2 x M8 Bolts, Washers, and Flange Nuts. [Parts: 2x M8 20mm Bolts, 2x M8 Ø20mm Washers, 2x M8 Flange Nuts]

Step 16

Align the Front Bumper Mount with the nut inserts on the front of the Pedal Frame. Bolt through and secure with 3 x M8 Bolts and Washers. [Parts: 1x Front Bumper Mount, 3x M8 16mm Bolts, 3x M8 Ø20mm Washers]

Step 17

Align the Front Bumper with mounting holes on Front Bumper Mount. Bolt through and secure with 4 x M8 Bolts and Flange Nuts. [Parts: 1x Front Bumper, 4x M8 20mm Socket Head Bolts, 4x M8 Flange Nut]

Step 18

Align the Rear Bumper Mount with the nut inserts on the Rear Frame. [Parts: 1x Rear Bumper Mount]

Step 19

Bolt through and secure with 2 x M8 Bolts and Washers. [Parts: 2x M8 20mm Bolts, 2x M8 Ø20mm Washers]

Step 20

Align mounting holes on Rear Bumper with Rear Bumper Mount. Bolt through and secure using 4 x M8 Bolts and Flange Nuts. [Parts: 1x Rear Bumper, 4x M8 20mm Socket Head Bolts, 4x M8 Flange Nuts]

Step 21

Your Go Kart Cockpit is complete. [Parts: NIL]

Seat Cover Installation

Install the Go Kart Seat Cover starting from the bottom first. Wrap the outer lip around the seat. Pinch drawstring release on the back and pull the drawstring to tighten. [Parts: 1x Go Kart Seat Cover] [Tip: Hand wash seat cover separately in cold water only]

Adjustments

Pedal Plate Lateral Adjustment

Loosen the NLR Knobs securing the Pedal Plate to the Pedal Frame. Adjust to the desired position and tighten to lock in place. [Parts: NIL]

Pedal Plate Angle Adjustment

Remove the front NLR Knobs and loosen the rear NLR Knobs securing the Pedal Plate to the Pedal Frame. Adjust to the desired angle, reinstall the front NLR Knobs and tighten to lock in place. [Parts: NIL]

Centre Pole Angle Adjustment

Uninstall the rear Bolts and Washers, loosen the front Bolts securing the Wheel Plate to the Centre Pole. Adjust to the desired angle, reinstall rear Bolts and tighten to lock in place. [Parts: NIL]

Centre Pole Height Adjustment

Uninstall Bolts and Washers securing the Centre Pole to the Centre Pole Base. Adjust to the desired height. Reinstall Bolts and tighten to lock in place. [Parts: NIL]

Seat Angle Adjustment

Remove End Caps and Bolts securing the Go Kart Seat to the Seat Frame. Adjust Go Kart Seat to the desired angle. Reinstall Bolts, tighten to lock in place. Reinstall End Caps. [Parts: Tip: Use the edge of the 14mm Wrench to help pry out the End Caps.]

Buttkicker Mount

Step 29

Uninstall Rear Bumper. Uninstall Bolts and Washers securing Rear Bumper Mount to Rear Frame. [Parts: NIL]

Step 30

Align Buttkicker Mount with Rear Bumper Mount holes. Reinstall previously removed Bolts and Washers. Reinstall Rear Bumper. [Parts: 1x Buttkicker Mount]

Assistance

For further support with your product, please contact the Next Level Racing team at: support@nextlevelracing.com. Watch the assembly video: [Assembly Video Link]

	Next Level Racing F-GT LITE iRacing Edition Assembly Manual Step-by-step assembly instructions and adjustment guide for the Next Level Racing F-GT LITE iRacing Edition racing cockpit. Includes warnings, parts list, and contact information.
	Next Level Racing Challenger Cockpit Instruction Manual Comprehensive assembly instructions, parts list, and adjustment tips for the Next Level Racing Challenger Cockpit. Includes safety warnings and contact information for support.
	Next Level Racing ERS3 Hypercool Instruction Manual Get started with your sim racing journey with the Next Level Racing ERS3 Hypercool ventilated seat. This comprehensive manual provides detailed assembly instructions, safety guidelines, and product information to optimize your racing experience.
	Next Level Racing F-GT Pro Cockpit Assembly and Adjustment Guide Comprehensive instruction manual for assembling and adjusting the Next Level Racing F-GT Pro racing simulator cockpit. Includes parts list, warnings, and step-by-step assembly instructions for a realistic sim racing experience.
	Next Level Racing F-GT Lite Keyboard & Mouse Tray Assembly Instructions Comprehensive guide to assembling the Next Level Racing F-GT Lite Keyboard & Mouse Tray, featuring step-by-step instructions, parts list, and pre-race checks for sim racing enthusiasts.
	Next Level Racing Wheel Stand DD Instruction Manual Comprehensive instruction manual for assembling the Next Level Racing Wheel Stand DD, including parts list, assembly steps, and adjustment tips.
	Next Level Racing ES1 Instruction Manual This manual provides instructions for assembling and installing the Next Level Racing ES1 racing seat. It includes pre-race checks, parts list, and mounting instructions for universal seat brackets and custom seat rails.
	Next Level Racing Performance Series Instruction Manual Comprehensive instruction manual for assembling and using Next Level Racing Performance Series reclining seats and cockpits. Includes pre-race checks, parts lists, and assembly guides for various models.