Yaheetech 614299 Gazebo Installation Guide
Please read this instruction manual carefully before attempting to install.
Recommendation: 2 or more people for installation. Estimated assembly time: 1 hour.
Safety Warnings:
- Not intended for use by children.
- Keep away from fire or other heat sources.
- We recommend wearing protective gloves.
- Follow instruction manuals and use a pad to avoid damage during assembly.
Unpacking Instructions:
Unpack and take out the canopy fabric and the frame storage bag. Other parts are packed in the frame storage bag. Please take them out for further assembly. Note: Do not use a knife when unpacking to avoid cutting the product and parts accidentally.
Assembly Steps:
Step 1: Frame Assembly
The frame consists of multiple interconnected parts. Ensure all parts are accounted for before proceeding.
Diagram Description: Shows the main frame structure being unfolded and assembled.
Step 2: Attaching the Canopy Top
Attach the small canopy top (2) onto the frame (1). Secure it to the large canopy top (3) using hook and loop fasteners. Pull out the extendable tube fully and plug it into the corner of the large canopy top (3).
Diagram Description: Illustrates attaching the smaller top section to the main canopy and securing it, then extending a pole into the corner.
Step 3: Extending and Securing the Frame
Step on the end of the frame leg and press the button to push up the leg until it is locked into place. Attach the hook and loop straps to the bar. Press the button on each corner to open the canopy.
Diagram Description: Shows a person stepping on a leg to extend it and a close-up of a button being pressed to lock a section. Another diagram shows attaching straps and pressing a button to open the canopy.
Step 4: Securing with Ropes
Thread rope (B) through adjacent corners of the frame (1) and the straps. Secure rope (B) by tying a knot.
Diagram Description: Shows a rope being threaded through connection points on the frame and straps, with a close-up of a knot being tied.
Step 5: Attaching Netting/Curtains
Loop curtain rings (C) to the sewn-in loops on the top edge of the netting (4). Secure the netting to rope (B) using the curtain rings. Lastly, tie back the netting/curtains.
Diagram Description: Shows curtain rings being attached to netting loops, then the netting being attached to the rope, and finally the curtains being tied back.
Step 6: Final Securing and Ground Anchoring
Step on the end of the stand legs and press the button to push up until locked at the highest height. Fix the canopy top (3) to the frame (1) with the buckle. Secure the frame (1) to the ground with ground nails (D). Fix both ends of rope (A) to the pull loop of canopy top (3) and the ground nail.
Diagram Description: Shows legs being extended to their highest point and locked. A buckle is used to attach the canopy top to the frame. Ground nails are hammered into the ground to secure the frame, and a rope is attached from the canopy top to the ground nail.
Step 7: Using Sandbags (Optional Stability)
Fill up the sandbags and tie them to the frame legs for added stability.
Diagram Description: Shows sandbags being filled and attached to the legs of the gazebo.
Customer Support and Manual Download
If you are not entirely satisfied with your purchase, please contact the seller through your order history on the platform where the purchase was made. Follow the steps: Go to Your Orders > Find your order > Select Problem with order > Choose your topic > Select Contact seller.
You can also download the electronic Installation Manual from the 'Product guides and documents' section of the advertising page.
Manufacturer Information:
Manufactured in PRC for Yahee GmbH. Importer: Yahee GmbH, Höpfigheimer Straße 11, 74321 Bietigheim-Bissingen.
