Introduction
Please read this instruction manual carefully before attempting to install the Yaheetech 614364 Gazebo.
Illustration: A line drawing of a multi-tiered gazebo with a roof and four support legs.
Important Safety Information
? We recommend 2 or more people to install.
⏰ The expected assembly time is 1 hour.
?? Not intended for use by children.
?❌ Keep away from fire or other heat sources.
??️ We recommend wearing protective gloves.
Please follow the instruction manuals and use a pad to avoid damage during assembly.
Illustration: Two sequences of illustrations. The first shows a cartoon figure placing parts on a floor without protection, marked with a red X. The second shows a figure placing parts on a protective pad, marked with a green checkmark.
Parts List
Please identify all parts before assembly. Quantities are indicated.
| Part ID | Description | Quantity |
|---|---|---|
| 1 | Pole Section | x1 |
| 2 | Pole Section | x1 |
| 3 | Pole Section | x2 |
| 4 | Beam | x2 |
| 5 | Beam | x2 |
| 6 | Roof Support | x4 |
| 7 | Roof Support Connector | x1 |
| 8 | Diagonal Brace | x8 |
| 9 | Shelf Bracket | x4 |
| 10 | Shelf | x1 |
| 11 | Shelf | x1 |
| 12 | Bottle Opener Attachment | x1 |
| 13 | Top Roof Panel | x1 |
| 14 | Roof Panel | x1 |
| 15 | Roof Panel | x1 |
| A | Hook | x10 |
| B | Bracket | x4 |
| C | Screw | x46 |
| D | Screw | x12 |
| E | Nut | x4 |
| F | Wrench | x1 |
| G | Allen Key | x1 |
| H | Expansion Bolt | x8 |
| I | Allen Key | x8 |
| J | Nut | x4 |
| K | Washer | x16 |
Assembly Instructions
Follow these steps carefully for proper assembly.
Step 1: Assemble Vertical Poles
Illustration: Four vertical pole sections (labeled 1, 2, 3, 3) are shown. A close-up shows how bracket B and screw C are used to connect pole sections.
Connect pole sections using brackets (B) and screws (C) as shown.
Step 2: Attach Horizontal Beams
Illustration: The assembled vertical poles are shown. Horizontal beams (4, 5) are attached to the poles using screws (C). A close-up shows screws being partially tightened.
During assembly, please first half-tighten all screws into the holes. After all the screws are set, fully tighten them.
Step 3: Install Roof Supports
Illustration: The main frame is shown. Roof supports (6) are attached to the top of the frame using screws (D), nuts (E), and the roof support connector (7). Close-ups show specific connection points.
Attach roof supports (6) using screws (D), nuts (E), and connector (7).
Step 4: Add Roof Panels
Illustration: Two roof panels (14, 15) are shown being placed onto the assembled roof frame.
Place roof panels (14) and (15) onto the frame.
Step 5: Attach Top Roof Section
Illustration: The top roof panel (13) is shown being placed onto the assembled roof structure.
Attach the top roof panel (13).
Step 6: Secure Diagonal Braces and Hooks
Illustration: Diagonal braces (8) are attached to the frame using screws (C) and washers (K). The bottle opener attachment (12) is also shown being secured. Hooks (A) are attached to a shelf support.
Secure diagonal braces (8) with screws (C) and washers (K). Attach the bottle opener attachment (12).
Step 7: Attach Shelf Brackets
Illustration: Shelf brackets (9) are shown being attached to the vertical poles using screws (D). Two possible attachment points are indicated.
Attach shelf brackets (9) to the vertical poles using screws (D).
Step 8: Install Shelves and Hooks
Illustration: Shelves (10, 11) are shown being attached to the brackets. Hooks (A) are shown attached to a shelf support. Two configurations for shelf placement are shown.
Install shelves (10, 11) and hooks (A). Note the two possible shelf configurations.
Step 9: Secure Gazebo Base - Method 1
Illustration: A close-up shows using an Allen key (I) to secure the gazebo base to the ground.
Method 1: Secure the gazebo base to the ground using Allen key (I).
Step 10: Secure Gazebo Base - Method 2
Illustration: Two close-ups show securing the gazebo base. Method 2.1 shows using a drill and screw. Method 2.2 shows using expansion bolts (H) and nuts.
Method 2: Secure the gazebo base using expansion bolts (H) and nuts, or screws.
Customer Support and Contact Information
If you are not entirely satisfied with your purchase, please feel free to contact us using the following steps:
- Go to Your Orders.
- Find your order in the list.
- Select Problem with order.
- Choose your topic from list displayed.
- Select Contact seller.
USA:
YAHEE TECHNOLOGIES CORP
Address: 1532 S VINEYARD AVE ONTARIO CA 91761
UK:
Monumart Limited
Address: Europa House, Europa Way, IP15DL, Ipswich.
Germany (Imported by):
Yahee GmbH
Address: Höpfigheimer Straße 11, 74321 Bietigheim-Bissingen
France:
Yahee SAS
Address: 6, Place de la Madeleine. 75008 Paris.
Italy:
Yahee SRL
Address: Via Generale Gustavo Fara, 26.20124 Milano.
Manufactured in PRC.
Additional Information
You can also download the electronic Installation Manual from the Product guides and documents section of the advertising page.
