BISSELL Little Green PROHEAT 1425 Series User's Guide

Thanks and Consumer Services

Thank you for purchasing a BISSELL Little Green PROHEAT. We are glad you chose our complete, high-tech home cleaning system. Your Little Green PROHEAT is well-made and backed by a limited one-year warranty and a dedicated Consumer Services department.

BISSELL has been a leader in homecare products since 1876, when my great-grandfather invented the floor sweeper.

Thanks again, from all of us at BISSELL.

Mark J. Bissell
President and Chief Executive Officer

BISSELL Consumer Services

For information about repairs, replacement parts, or warranty questions, please contact:

BISSELL Consumer Services

Phone: 1-800-237-7691

Hours: Monday - Friday 8 a.m. - 10 p.m. EST, Saturday 9 a.m. - 8 p.m. EST

Website: www.bissell.com or www.2xbissell.com

Mail: BISSELL HOMECARE, INC, PO Box 3606, Grand Rapids MI 49501, ATTN: Consumer Services

When contacting BISSELL, please have your model number available.

Please record your Model Number: ___________________

Please record your Purchase Date: ___________________

Note: Keep your original sales receipt. It provides proof of date of purchase in the event of a warranty claim. See "About Your Warranty" on page 12 for details.

Register your new BISSELL product at: www.bissell.com/productregistration

Important Safety Instructions

When using an electrical appliance, basic precautions should be observed, including the following:

Read all instructions before using your LITTLE GREEN® PROHEAT®

⚠️ WARNING: To reduce the risk of fire, electric shock, or injury:

• Do not use for any purpose other than described in this User's Guide.
• Use only BISSELL cleaning products intended for use in this appliance.
• Use only manufacturer's recommended attachments.
• Do not expose to rain; store indoors.
• Do not handle the LITTLE GREEN® PROHEAT® plug or appliance with wet hands.
• Do not leave the LITTLE GREEN® PROHEAT® plugged in.
• Do not insert any object into appliance openings or use with blocked openings. Keep free of dust, lint, hair, and anything that may reduce airflow.
• Do not expose hair, loose clothing, fingers, or body parts to openings or moving parts.
• Keep appliance on a level surface.
• Be extra careful when cleaning stairs.
• Do not carry the appliance while in use.
• Never spray at people or animals.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Do not pick up hot or burning objects.
• Do not pick up flammable or combustible materials (e.g., lighter fluid, gasoline, kerosene) or use in the presence of explosive liquids or vapor.
• Do not pick up toxic material (e.g., chlorine bleach, ammonia, drain cleaner, gasoline).
• Do not use appliance in an enclosed space filled with vapors given off by oil-based paint, paint thinner, some moth-proofing substances, flammable dust, or other explosive or toxic vapors.
• Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord around sharp corners or edges, run appliance over cord, or expose cord to heated surfaces.
• Do not use with a damaged cord or plug.
• Turn off all controls before unplugging.
• Unplug before attaching the TurboBrush.
• Unplug from outlet when not in use and before conducting maintenance and troubleshooting.

• Do not use the LITTLE GREEN® PROHEAT® if it has been dropped, damaged, left outdoors, or dropped into water. Have it repaired at an Authorized Service Center.
• Unplug by grasping the plug, not the cord. Do not unplug by pulling on the cord.
• Always connect to a properly grounded outlet; see grounding instructions.
• Do not modify the 3-prong grounded plug.

SAVE THESE INSTRUCTIONS

Grounding Instructions

This appliance must be connected to a grounded wiring system. If it should malfunction or break down, grounding provides a safe path of least resistance for electrical current, reducing the risk of electrical shock. The cord for this appliance has an equipment-grounding conductor and a grounding plug. It must only be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Diagram illustrating grounded outlets and a grounding pin.

⚠️ WARNING: Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or service person if you aren't sure if the outlet is properly grounded. DO NOT MODIFY THE PLUG. If it will not fit the outlet, have a proper outlet installed by a qualified electrician. This appliance is designed for use on a nominal 120-volt circuit and has a grounding attachment plug that looks like the plug in the drawing. Make certain that the appliance is connected to an outlet having the same configuration as the plug. No plug adapter should be used with this appliance.

This model is for household use only.

Product View

The diagram shows the BISSELL Little Green PROHEAT portable carpet cleaner. It labels the following components:

• Power Switch: Controls the main power.
• Clean/Solution Tank: Holds the cleaning solution and water.
• Dirty/Collection Tank: Collects dirty water and debris.
• Built-In Heater Switch (red): Activates the heating element to warm the water.
• Heat Indicator Light: Illuminates when the water has reached the correct temperature.
• Flex Hose Clip: Guides and stores the flex hose.
• 2-in-1 Crevice Tool* / TurboBrush®*: (*Select Models only) Attachments for specific cleaning tasks.
• Tough Stain Brush Tool: Standard brush attachment for the flex hose.
• Flex Hose with Spray Trigger: Delivers cleaning solution and suction.
• Tool Clip: Stores cleaning tools on the unit.
• Quick Release™ Cord Wrap: For storing the power cord.
• Power Cord: Connects the unit to a power outlet.

Product Features

• Built-in-Heater Switch (red): Allows you to raise water temperature for improved cleaning performance.
• Heat Indicator Light: Illuminates when the water has reached the correct temperature after turning on the heater switch.
• Flex Hose Clip: Guides the storage of the vacuum flex hose around the unit.
• TurboBrush Clip: Attaches to the unit for storage of the 2-in-1 crevice tool or TurboBrush.
• Tough Stain Brush: The standard tool that attaches to the Flex Hose.
• Quick Release Cord Wrap: To remove the Power Cord, gently twist/rotate the wrap clockwise.
• Power Cord: Stores on the back of the unit by wrapping around the Quick-Release Cord Wrap. Note: Unwrap the Power Cord completely before operating the unit.

⚠️ WARNING: Do not use an extension cord with this product. The use of an extension cord may result in a severe electrical shock, particularly if the extension cord does not have an electrical rating higher than that of the product, OR if the extension cord does not have a three-prong grounding plug and if the extension cord is not plugged into a circuit box with a ground fault circuit interrupter. Safety precautions such as keeping all connections off the ground and dry will not eliminate the danger.

⚠️ WARNING: Do not use this product while on any type of ladder. Do not place the product in a place where it will be stepped on or kicked while in use. Do not place the product on an elevated surface where it may be pulled off the surface while in use.

⚠️ WARNING: Use only BISSELL Little Green formula in your cleaner. Use of cleaning formulas which contain lemon or pine oil may damage this appliance and void the warranty. Chemical spot cleaners or solvent-based soil removers also should not be used. These products may react with the plastic materials used in your cleaner, causing cracking or pitting.

Assembly

Assembling your Little Green PROheat is a simple process. The only tool needed is a Phillips head screwdriver.

1. Slide the back plate of the flex hose clip into the opening on the front of the unit. You will hear a "snap" when it is locked in place. (Diagram shows this step).
2. Take the flex hose storage bracket and slide the lower plate into the opening on the back of the unit. Make sure the screw holes line up. (Diagram shows this step).
3. Insert screw and tighten with a screwdriver. (Diagram shows this step).
4. Wrap the flex hose around the unit and place the hose grip into the bracket. Turn the bracket latch clockwise to lock it in place. (Diagram shows this step).
5. Slide the tool clip into the slit on the flex hose storage bracket and place the tool on the clip. (Diagram shows this step).

Operation

Getting Ready

1. To fill the clean/solution tank:
   • A. Remove the tank by lifting it straight up and then away from the unit. (Diagram shows this step).
   • B. Unscrew the black cap at the bottom of the clean/solution tank. (Diagram shows this step).
   • C. Add BISSELL 2X Little Green Formula to the FORMULA fill line on the clean/solution tank. Fill the clean/Solution tank with hot (NOT boiling) tap water to the WATER fill line. (Diagram shows this step).
   • D. Replace and tighten the black cap.
   • E. Replace the clean/solution tank by lining up the vertical guides on the left side of the unit with the indentations on the clean/solution tank and gently sliding it down into position. (Diagram shows this step).
2. Unwrap vacuum flex hose completely from onboard hose storage. (Diagram shows this step).
3. Attach your selected cleaning tool to the spray trigger unit by pressing the tool onto the spray trigger firmly until the button lock snaps into place. Make certain the tool is securely attached. (Diagram shows this step).
4. Twist the quick release cord wrap clockwise to unwrap the power cord completely from onboard cord storage and plug into a 120 Volt, 60 Hz grounded outlet as described in Important Safety Instructions, page 3. (Diagram shows this step).
5. Press the power switch to ON position. Press the red heater switch to "ON". Within 30 seconds, the heat indicator light will illuminate, indicating the heater has reached the proper temperature. (Diagram shows switch locations).
6. Begin by pressing the spray trigger for 5-10 seconds to allow the non-heated water to travel through the heater. (Diagram shows spray trigger).
7. Press and hold the spray trigger—spray will start in a few seconds. Raise the tool slightly to check for spray.

Pre-treating

Cleaning effectiveness will be enhanced if you pre-treat heavily stained or highly-soiled areas. Here's how to do it:

1. Hold the cleaning tool just above the surface of the carpet or upholstery to be cleaned. Press the trigger to release a spray of cleaning solution directly onto the soiled area. (Diagram shows this step).
2. Wait 3-5 minutes before cleaning.

⚠️ WARNING: Be sure to unplug the cord before attaching the TurboBrush (select models only).

Cleaning with your Little Green PROheat

1. Hold the tool approximately 1" above the soiled surface. Press the spray trigger to apply the cleaning solution to the soiled area. (Diagram shows this step).
2. Using the brush on the tool, gently scrub the area to be cleaned.

   Note: If using the TurboBrush, the switch should be in the “BRUSH” position. This activates the brush only.

3. For thorough cleaning, spray additional solution while the brush and suction are in contact with the surface.
4. Apply downward pressure on the tool and pull it toward you. The suction will remove the dirt and cleaning solution. Continue until no more dirt can be removed.

   Note: If using the TurboBrush, move the switch to the “SUCTION” position. This activates the suction to remove the dirt and cleaning solution. Move the switch back to the "BRUSH" position for additional brushing action.

5. As a final step, use “drying strokes” (by not pressing the spray trigger) to remove as much liquid/moisture as possible. Repeat this step as often as necessary.

   Note: If using the TurboBrush, move the switch to the "SUCTION" position. This activates the suction to remove the dirt and cleaning solution.

IMPORTANT: Check the manufacturer's tag before cleaning upholstery. “W” or “WS” on the tag means you can use your Little Green. If tag is coded with an “S” (with diagonal strike-through), or says “Dry Clean Only,” do not proceed. If manufacturer's tag is missing or not coded, check with your furniture dealer.

? Tip: Deep cleaning stairs and high-traffic areas on a regular basis can prolong carpet life.

? Tip: Check upholstery stuffing before cleaning. Colored stuffing may bleed through the fabric when it becomes wet.

Maintenance and Care

After cleaning

1. Turn Power Switch to OFF position.
2. Unplug Power Cord from outlet.

   Note: If a significant amount of Little Green formula/water remains, it is all right to leave it in the Clean/Solution Tank for your next cleaning task.

3. Empty and rinse the Dirty/Collection Tank after each use, OR when dirty water reaches the indicated maximum fill line. To remove the tank, lift up the Dirty/Collection Tank retainer lever and remove the tank from the unit. (Diagram shows retainer lever).
4. Disconnect the cleaning tool from the spray trigger by pushing down on the button lock and pulling straight off. (DO NOT twist tools to remove them).
5. Once removed from the spray trigger, all tools can be cleaned by rinsing under clean running water. The TurboBrush tool's switch must be in “SUCTION” position before rinsing under clean running water.
6. Check spray nozzle for accumulated dirt or debris. If necessary, clean with a soft bristle brush.

Machine storage

1. Wipe all surfaces with a soft cloth.
2. Wrap power cord around the cord wrap on the back of the Little Green PROheat.
3. Wrap flex hose around the base of the unit and secure the spray trigger.
4. Store unit in a protected, dry area, at room temperature (40° to 110°F).

? Tip: Before turning off the Little Green, suction up clean water to thoroughly rinse out the interior of the flex hose. Then, lift the cleaning tool and point it upwards to drain any remaining water into the dirty/collection tank.

⚠️ WARNING: Keep spray away from face. Failure to do so may result in personal injury.

Troubleshooting

Reduced spray or no spray

Deep cleaner won't pick up cleaning solution

TurboBrush attachment-brush will not turn

TurboBrush attachment- no suction

Thank you for selecting a BISSELL product.

Please do not return this product to the store.

For any question or concern, BISSELL is happy to be of service. Contact us directly at 1-800-237-7691.

Replacement Parts

Accessories

Earn Rewards Points!

To qualify you for discounts, rebates, and other BISSELL perks. Visit www.bissell.com/rewards to learn more.

Warranty - BISSELL Little Green PROHEAT

This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below.

Limited One Year Warranty

Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL Homecare, Inc. will repair or replace (with new or remanufactured components or products), at BISSELL's option, free of charge from the date of purchase by the original purchaser, for one year any defective or malfunctioning part.

See information below on "If your BISSELL product should require service".

This warranty applies to product used for personal, and not commercial or rental service. This warranty does not apply to fans or routine maintenance components such as filters, belts, or brushes. Damage or malfunction caused by negligence, abuse, neglect, unauthorized repair, or any other use not in accordance with the User's Guide is not covered.

NOTE: Please keep your original sales receipt. It provides proof of date of purchase in the event of a warranty claim.

If your BISSELL product should require service:

Contact BISSELL Consumer Services to locate a BISSELL Authorized Service Center in your area.

If you need information about repairs or replacement parts, or if you have questions about your warranty, contact BISSELL Consumer Services.

Website or E-mail: www.bissell.com, Use the “Customer Services” tab. Or visit: www.2Xbissell.com

Or call: BISSELL Consumer Services 1-800-237-7691

Hours: Monday - Friday 8 a.m. - 10 p.m. ET, Saturday 9 a.m. - 8 p.m. ET

Or write: BISSELL Homecare Inc., PO Box 3606, Grand Rapids MI 49501, ATTN: Consumer Services

BISSELL HOMECARE, INC. IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELL'S LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY

THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER ORAL OR WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION OF LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE ONE YEAR DURATION FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

NOTE: Please keep your original sales receipt. It provides proof of date of purchase in the event of a warranty claim.

©2009 BISSELL Homecare, Inc. Grand Rapids, Michigan. All rights reserved. Printed in China. Part Number 120-4142. Rev 10/09.

Visit our website at: www.bissell.com