BISSELL Little Green PROheat User Guide

Thank you for purchasing a BISSELL Little Green

BISSELL is pleased you purchased a Little Green machine. BISSELL's expertise in floor care and cleaning has been put to work designing and manufacturing this advanced, all-in-one home cleaning system.

Your Little Green machine features quality craftsmanship and is backed by a limited one-year warranty. BISSELL is also supported by knowledgeable and dedicated Customer Service representatives who will be eager and courteous in responding to you.

Our great-grandfather invented the mechanical sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high-quality homecare products, like your Little Green.

Thank you again, from all of us at BISSELL.

Mark J. Bissell
President and Chief Executive Officer

BISSELL Customer Service

For more information regarding repairs, replacement parts, or warranty questions, contact BISSELL Customer Service:

1-800-263-2535

Monday - Friday: 8 a.m. to 10 p.m. HNE
Saturday: 9 a.m. to 8 p.m. HNE

Address:
BISSELL Canada Corporation
P.O. Box 1003
Niagara Falls, ON L2E 6W2
Attn: Customer Service

Or visit the BISSELL website: www.bissell.ca or www.2Xbissell.ca

When contacting BISSELL, please have your model number ready.

Model Number: _________________________

Date of Purchase: _________________________

NOTE: Please keep your original sales receipt. Your sales receipt is your proof of purchase for warranty claims. Refer to page 12 for more details on your warranty.

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING YOUR LITTLE GREEN

WARNING: To reduce the risk of fire, electric shock, or injury:

• Do not use appliance for anything other than its intended use as described in this User Guide.
• Use only BISSELL cleaning formulas intended for use with this appliance.
• Use only manufacturer-recommended attachments.
• Do not expose to rain. Store indoors.
• Do not touch the plug or appliance with wet hands.
• Do not leave the Little Green unattended while plugged in.
• Do not insert any objects into appliance openings or use with blocked openings. Keep appliance free of dust, lint, hair, and anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
• Keep appliance on a level surface.
• Use extra care when cleaning on stairs.
• Do not carry the appliance while it is operating.
• Do not direct spray at people or animals.
• Do not allow children to use the appliance as a toy. Close supervision is necessary when used by or near children.
• Do not pick up hot or burning objects.
• Do not pick up flammable or combustible materials (liquid lighter fluid, gasoline, kerosene, etc.) nor use in the presence of explosive vapors or liquids.
• Do not pick up toxic material (chlorine bleach, ammonia, pipe cleaner, etc.).
• Do not use in a confined space filled with explosive, toxic vapors from paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic gas or vapor.
• Do not use the cord as a handle, carry by the plug, close a door on the cord, pull cord around sharp corners or edges, or run appliance over the cord. Keep cord away from heated surfaces.
• Do not use appliance if the cord or plug is damaged.
• Turn off all controls before unplugging.
• Unplug before attaching the TurboBrush attachment.
• Unplug after use and before performing maintenance or troubleshooting.
• Do not use the Little Green if it has been dropped, damaged, left outdoors, or dropped into water. Have it repaired at an authorized service center.
• To unplug, grasp the plug, not the cord. Do not unplug by pulling on the cord.
• Always connect to a properly grounded outlet; see Grounding Instructions.
• Do not modify the three-prong plug with a ground pin.
• Do not use an extension cord with this product. Using an extension cord may result in serious electric shock, especially if the extension cord is not of a higher gauge than the product OR if the extension cord is not equipped with a three-prong plug and a ground fault circuit interrupter (GFCI) outlet. This hazard cannot be eliminated by taking safety precautions, even by keeping all connections away from the ground and in a dry condition.

GROUNDING INSTRUCTIONS

This appliance must be connected to a grounded wiring system. If it should malfunction or break down, grounding provides a safe path of least resistance for electrical current, reducing the risk of electric shock. The cord for this appliance has a conductor, including an equipment-grounding conductor and a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.

WARNING: Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided. If it will not fit the outlet, have a proper outlet installed by a qualified electrician. This appliance is intended for household use only.

Product Diagram

Power Switch

Clean Water/Solution Tank (PVC Free)

Dirt/Water Tank (PVC Free)

Heater Switch* (Certain models)

Heater Indicator Light* (Certain models)

Flexible Hose (PVC Free)

2-in-1 Tool* or TurboBrush* attachment (Certain models)

Crevice Tool

Hose Storage Hook

Cord Wrap

Flexible Hose with Spray Trigger

Attachment Hook* (Certain models)

Power Cord

Product Features

Heater Switch (Red)* Certain models

The Little Green PROheat offers the ability to boost water temperature to provide increased cleaning performance for your cleaning needs.

Heater Indicator Light* Certain models

After you turn on the heater switch, the indicator light will illuminate to signal that the heater has reached the proper temperature. The heater indicator light will illuminate to signal that the heater has reached the proper temperature.

Flexible Hose Hook

This hook makes it easy to store the flexible hose around the unit.

TurboBrush* Attachment Hook Certain models

Attached to the unit, this hook allows storage of the 2-in-1 tool or the TurboBrush attachment.

Crevice Tool

This essential attachment can be attached to the flexible hose.

Quick Release Cord Wrap

To retract the power cord, gently turn the Quick Release cord wrap clockwise.

Power Cord

The power cord, with its three-prong plug, stores at the rear of the Little Green by wrapping around the Quick Release cord wrap. NOTE: Fully unwind the power cord before operating the appliance.

WARNING: Do not use a spray cleaner with this product. Using a spray cleaner can result in serious electric shock, especially if the spray cleaner is not of a higher gauge than the product OR if the spray cleaner is not equipped with a three-prong plug or plugged into a GFCI outlet. This hazard cannot be eliminated by taking safety precautions, even by keeping all connections away from the ground and in a dry condition.

WARNING: Do not use this product while standing on a ladder, or on any other unstable surface. Do not place this product in a location where it can be stepped on or kicked by someone while it is operating. Do not place this product on an elevated surface where it can be pushed off the surface while it is operating.

WARNING: Use only BISSELL 2X Ultra Concentrated Formulas with your appliance. Using cleaning formulas containing lemon or pine oil can damage this appliance and void the warranty. Also, do not use a solvent-based cleaner or a liquid rug/upholstery cleaner. These products contain the plastic which can react with the plastic parts used in your appliance, causing cracking or marking.

Assembly

Assembling your Little Green PROheat is a simple process. The only tool required to assemble your cleaning appliance is a Phillips head screwdriver.

1. Take the hose hook and slide the rear plate into the opening on the front of the unit. You will hear a click when the plate is properly seated.
2. Take the hose storage hook and slide the bottom plate into the opening on the rear of the unit. Ensure the screw holes are aligned.
3. Insert the screw and tighten with a screwdriver.
4. Wrap the flexible hose around the unit and place the hose connector into its holder. Turn the holder latch clockwise to lock it.
5. If your model includes a TurboBrush attachment, insert the attachment hook into the slot on the hose storage hook and place the attachment onto the hook.

Usage

Preparation

1. To fill the clean water/solution tank:
   A. Remove the tank by pulling it straight up and away from the unit.
   B. Unscrew the black cap located at the bottom of the clean water/solution tank.
   C. Add BISSELL 2X Little Green cleaning formula until the fill line for CLEAN WATER/SOLUTION TANK is reached. Fill the clean water/solution tank with hot (not boiling) tap water to the fill line for WATER. Replace and tighten the black cap.
   D. Replace the clean water/solution tank by aligning the vertical lines on the left side of the unit with the grooves in the clean water/solution tank and slowly sliding it into place.
2. Release the flexible vacuum hose by turning the holder latch clockwise. Fully unwind the flexible vacuum hose.
3. Attach the cleaning tool of your choice to the spray trigger assembly by pushing the tool onto the spray trigger until the button latch snaps into its socket. Ensure the tool is securely in place.
4. Turn the Quick Release cord wrap clockwise to fully unwind the power cord from its integrated housing and plug the cord into a grounded 120-volt, 60 Hz outlet as shown in the "Important Safety Instructions" section on page 3.
5. Turn the power switch to the ON position. If your model includes a heater switch, turn the red heater switch to the ON position. In 30 seconds or less, the heater indicator light will illuminate to signal that the heater has reached the proper temperature. Begin by pressing the spray trigger for 5-10 seconds to allow unheated water to circulate through the heater.
6. Press and hold the spray trigger: spraying will begin a few seconds later. Lift the tool slightly to check for spray.

Pre-treatment

Cleaning effectiveness will be increased if you pre-treat heavily soiled or stained areas. Here's how:

1. Hold the cleaning tool approximately 1 inch above the soiled surface. Press the spray trigger to spray a stream of cleaning solution onto the soiled surface.
2. Wait 3 to 5 minutes before proceeding to clean.

CAUTION: Remember to unplug the cord before attaching the TurboBrush attachment (certain models).

Usage (continued)

Cleaning with your Little Green PROheat

1. Hold the tool about 1 inch above the soiled surface. Press the spray trigger to spray the cleaning solution onto the soiled surface.
2. Using the brush on the tool, gently brush the surface to be cleaned. NOTE: If using the TurboBrush attachment, the switch should be in the BRUSH position. This will activate the brush only.
3. For a more thorough cleaning, spray additional solution while the brush and suction tool are in contact with the surface being cleaned.
4. Apply downward pressure on the tool and pull it toward you. The suction will remove the dirt and cleaning solution. Continue until no more dirt is visible. NOTE: If using the TurboBrush attachment, turn the switch to the SUCTION position. This will activate the suction to remove dirt and cleaning solution. Turn the switch back to the BRUSH position to use the brush action again.
5. For "drying strokes" (without pressing the spray trigger), remove as much liquid and moisture as possible. Repeat this step as needed. NOTE: If using the TurboBrush attachment, turn the switch to the SUCTION position. This will activate the suction to remove dirt and cleaning solution.

IMPORTANT: Check the furniture manufacturer's tag before cleaning upholstery. The tag code "W" or "WS" means you can use your Little Green. If the tag has a code "S" (with a diagonal line through the code) or the words "Dry Cleaning Only," do not proceed with cleaning. If the furniture manufacturer's tag is missing or does not have a code, consult your furniture dealer.

Tip: Regularly deep cleaning stairs and high-traffic areas will extend the life of your carpets.

Tip: Check upholstery material before cleaning. Colors may transfer to fabric when wet.

Appliance Care and Maintenance

After Cleaning

1. Turn the power switch to the OFF position.
2. Unplug the power cord from the outlet. NOTE: If there is a significant amount of Little Green formula and water remaining, you may leave it in the clean water/solution tank for your next cleaning task.
3. Empty and rinse the dirt/water tank after each use or when the dirty water reaches the fill line. To remove the tank, lift the dirt/water tank latch and pull the tank away from the unit.
4. Disconnect the cleaning tool from the spray trigger assembly by pressing the button latch and pulling straight out on the tool to disengage it (DO NOT PULL THE TOOL BY TWISTING IT).
5. Once disconnected from the spray trigger assembly, any attachment may be cleaned by rinsing it in running water. The TurboBrush attachment switch must be in the SUCTION position before the brush can be rinsed in running water.
6. Check the spray nozzle for any debris or obstructions. If necessary, clean with a soft bristle brush.

Storing the Appliance

1. Clean all surfaces with a soft cloth.
2. Wrap the power cord around the cord wrap located at the rear of the Little Green.
3. Wrap the flexible hose around the base of the unit and lock the spray trigger.
4. Store the unit in a protected, dry area at a room temperature between 4°C and 43°C (40°F and 110°F).

Tip: Before turning off the Little Green, run it with clean water to rinse the inside of the hose. Then lift the cleaning tool and point it upwards to allow any remaining water to flow into the dirt/water tank.

CAUTION: Keep the sprayer away from the face of any person. Failure to do so could result in personal injury.

Troubleshooting

Weak or No Spray

Possible Causes:

1. Spray nozzle is clogged.
2. Clean water/solution tank is empty.
3. Internal part of clean water/solution tank is clogged.
4. Pump needs priming.

Solutions:

1. Clean the spray nozzle.
2. Check/refill the tank.
3. Clean the internal part at the bottom of the clean water/solution tank.
4. Gently lift the clean water/solution tank while pressing the trigger OR gently press the clean water/solution tank while pressing the trigger.

Appliance Does Not Pick Up Cleaning Solution

Possible Causes:

1. Tank latch is not properly latched.
2. Incorrect position of the upholstery tool.
3. Dirt/water tank is full.
4. Brush on upholstery tool is worn out.
5. Too much solution in the hose.
6. Incorrect cleaning formula.

Solutions:

1. Lift the tank latch and press down firmly to latch it.
2. Reposition the upholstery tool on the surface, following the recommended cleaning procedures. Empty the dirt/water tank.
3. Replace the brush.
4. Lift the tool upwards so that any water in the hose can flow into the dirt/water tank.
5. Use only BISSELL 2X Little Green cleaning formula.

TurboBrush Does Not Rotate

Possible Causes:

1. Incorrect position of the TurboBrush switch.

Solutions:

1. Turn the switch to the BRUSH position.

TurboBrush Does Not Suck

Possible Causes:

1. Incorrect position of the TurboBrush switch.

Solutions:

1. Turn the switch to the SUCTION position.

Thank you for choosing a BISSELL product. Please do not return this product to the store. If you have any questions or comments, BISSELL will be happy to help you. Please contact us directly at 1-800-263-2535.

Replacement Parts

Accessories

Warranty - BISSELL Little Green PROheat

For more information about this warranty and what it covers, please contact BISSELL Customer Service by email, phone, or mail at the address listed below.

One-Year Limited Warranty

Subject to the *DISCLAIMERS AND EXCLUSIONS listed below and upon receipt of the product, BISSELL Canada Corporation will, at its option, repair or replace (with new or remanufactured parts or products) any defective or malfunctioning part free of charge from the date of purchase by the original purchaser.

Refer to the section below titled "For BISSELL Product Service."

This warranty applies to products used for personal, non-commercial, or rental purposes only. This warranty does not cover components replaced during normal wear, such as belts or brushes. Warranties do not cover damage or malfunction caused by negligence, abuse, neglect, unauthorized repair, or any other use not in accordance with the User Guide.

For BISSELL Product Service:

Call BISSELL Customer Service at the number listed below or visit www.bissell.ca to identify the nearest authorized BISSELL Service Center. If no authorized BISSELL Service Center is located in your area, contact a BISSELL representative at canada.custhelp@bissell.ca or call the number below. BISSELL will issue a Return Authorization Number and a prepaid shipping label to return the product to BISSELL for warranty repair. The product must be returned with a photocopy of the proof of purchase. (The dated sales receipt is your warranty - do not send the original.) For more information regarding repairs or replacement parts, or for any warranty questions, call BISSELL Customer Service.

Website: www.bissell.ca

Email: canada.custhelp@bissell.ca

Telephone:
BISSELL Customer Service
1-800-263-2535

Monday - Friday: 8 a.m. to 10 p.m. HNE
Saturday: 9 a.m. to 8 p.m. HNE

Address:
BISSELL Canada Corporation
P.O. Box 1003
Niagara Falls, ON L2E 6W2
Attn: Customer Service

BISSELL CANADA CORPORATION IS NOT RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE WHATSOEVER CONNECTED WITH THE USE OF THIS PRODUCT. BISSELL'S LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT.

*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY: THE WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTY, ORAL OR WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION OF LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE.

NOTE: Please keep your original sales receipt; it is your warranty.