T233 Instruction Manual
Brand: 4MODERN HOME
Manufactured in: CHINA
Dear Customer
Thank you for choosing 4modernhome! We appreciate your business. Should you have any questions or encounter any issues, please don't hesitate to contact us. You can reach us via email at support@4modernhome.com or by calling 469-312-6428. Our team is dedicated to ensuring your complete satisfaction with your purchase. We value your feedback, as it helps future customers in making informed decisions. We encourage you to share your experience by leaving a brief product review on the platform where you made the purchase. Once again, thank you for choosing 4modernhome!
Best regards,
[4Modernhome/Support Team]
Important Safety Information & Warnings
⚠️ CAUTION: Risk of fire
? Please read all instructions carefully. Before you proceed to install, make sure that the power supply is turned off and remains off until installation is completed.
❗ Warning: If any special control devices are used with this fixture, follow the instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electric contractor.
❗ Warning: California Residents Proposition 65
This product contains lead, a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling this product.
Caution: It is highly recommended to get an electrician to install this light. Please make sure to turn the electricity off at the main circuit breaker before beginning installation. All glass is fragile. Use care when handling glass component(s) and/or lamp(s).
Product Overview & Parts
This instruction manual is for the 4modernhome T233 table lamp.
Diagram Description:
The diagram illustrates a table lamp assembly. The components are labeled as follows:
- Part A: Saddle (the base component where the harp attaches)
- Part B: Harp (the U-shaped metal piece that supports the lampshade)
- Part C: Shade (the lampshade itself)
- Part D: Finial (the decorative knob that secures the shade to the harp)
The lamp is designed to be powered by a standard electrical cord and plug.
Applicable Bulb Type:
A19, A60, T45, ST58 (Excluding bulb)
Parts Included:
| Code | Part Description | QTY |
|---|---|---|
| A | Saddle | 1 |
| B | Harp | 1 |
| C | Shade | 1 |
| D | Finial | 1 |
Assembly Instructions
- Unpack all parts from cartons carefully.
- During assembly, the power cord should be prevented from twisting.
- Place the harp (B) onto the saddle (A).
- Place the shade (C) onto the harp (B).
- Tighten the finial (D) into the harp (B) until tight.
