Kaval Step Light Installation Instructions
Product Specifications
| Model No. | Name | Material | Colour | Installation Type | IP Rating | Input Voltage | Protection Class | Lamp Base | Lamp Wattage | Colour Temp | Lumens | CRI | Wiring | Dimmable | Warranty |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HV3285T-SS316-12V | Kaval | 316 Stainless Steel | Stainless Steel | Wall - Surface Mounted | IP65 | 12v DC Constant Voltage - Requires external 12v DC LED Driver | 3 (Low Voltage) | Built in LED | 1x 1.5w | 3000k, 4000k, 5500k | 100lm, 110lm, 105lm | > 80 | Parallel | Yes - Triac Dimmable | 3 Years Replacement* |
| HV3285T-AB-12V | Kaval | Solid Brass | Antique Brass | Wall - Surface Mounted | IP65 | 12v DC Constant Voltage - Requires external 12v DC LED Driver | 3 (Low Voltage) | Built in LED | 1x 1.5w | 3000k, 4000k, 5500k | 100lm, 110lm, 105lm | > 80 | Parallel | Yes - Triac Dimmable | 3 Years Replacement* |
| HV3285T-BR-12V | Kaval | Solid Brass | Brass | Wall - Surface Mounted | IP65 | 12v DC Constant Voltage - Requires external 12v DC LED Driver | 3 (Low Voltage) | Built in LED | 1x 1.5w | 3000k, 4000k, 5500k | 100lm, 110lm, 105lm | > 80 | Parallel | Yes - Triac Dimmable | 3 Years Replacement* |
| HV3285T-BLK-12V | Kaval | 316 Stainless Steel | Black | Wall - Surface Mounted | IP65 | 12v DC Constant Voltage - Requires external 12v DC LED Driver | 3 (Low Voltage) | Built in LED | 1x 1.5w | 3000k, 4000k, 5500k | 100lm, 110lm, 105lm | > 80 | Parallel | Yes - Triac Dimmable | 3 Years Replacement* |
| HV3285T-WHT-12V | Kaval | 316 Stainless Steel | White | Wall - Surface Mounted | IP65 | 12v DC Constant Voltage - Requires external 12v DC LED Driver | 3 (Low Voltage) | Built in LED | 1x 1.5w | 3000k, 4000k, 5500k | 100lm, 110lm, 105lm | > 80 | Parallel | Yes - Triac Dimmable | 3 Years Replacement* |
Dimensions
A diagram showing the dimensions of the Kaval Step Light. The diagram displays a trapezoidal shape with the following dimensions: height 45mm, base width 45mm, and top width 51mm.
Wiring Diagram
Three wiring diagrams are provided, illustrating how to connect the Kaval Step Light to a 12v DC LED Driver. Each diagram shows connections for 3000k, 4000k, and 5500k color temperatures. The diagrams detail the positive (+) and negative (-) connections from the LED driver to the light fitting, with specific instructions for achieving the 4000k color temperature by joining the 3000k and 5500k wires to the neutral from the driver.
Important Safety Issues:
- This product must be installed by a qualified electrician according to AS/NZS 3000.
- Ensure all electrical mains are disconnected before any installation.
- Modification of this product will void any warranty.
- Havit Lighting does not take responsibility for wrong installation, incorrect use, or use of installation material that does not belong to the system.
- When installing low voltage fittings, Voltage to fitting must be within +or- 5% of voltage required and cannot be installed more than 25m from LED Driver, if not within this allowance warranty will be voided.
- When installing brass fittings, gloves must be worn to avoid any oils transferring to fitting.
- All 316 stainless steel fittings must have regular cleaning maintenance to avoid any tea staining from forming on fitting. (Warranty does not cover Tea Staining)
- All o-rings and seals must be in place correctly to maintain warranty.
- These instructions may be updated at any time due to product improvements. Please visit website for most current installation instructions.
Steps for Installation:
- Make sure that the electrical circuit is free of voltage (master switch off).
- Using an appropriate 12v DC LED Driver - DO NOT CONNECT LIGHT FITTING DIRECTLY TO 240V.
- Connect the cable - If more than one fitting installed, wiring must be done in parallel.
- Strip back the cable on both fitting and cable run and twist the positive cables together.
- Neutral cables are marked for selection of colour temperature. If 3000k or 5500k is selected you must terminate extra cable to be IP Rated to avoid any water making contact with internal parts of the cable. To get 4000k, Join both 3000k + 5500k together and connect to neutral on cable run.
- Solder all joins using solder and either a heat gun or butane gas torch.
- Cover connections using an adhesive lined heat shrink or gel cap to make connection watertight. Failure to do this will void warranty.
- Heat the heat shrink or crimp the gel cap making sure all connections are covered.
- With cables connected remove mounting bracket from back of fitting and install in desired location using appropriate screws for application.
- Apply silicon around edge of fitting to prevent any water from getting inside to electrical connections.
- All connections must be carried out carefully, inspect all contacts before switching back on the electric circuit.
Havit Lighting
