Important Information
Screws for wall mounting are not included. As wall materials vary, it is essential to use screws and fixings suitable for your specific wall type. For advice on appropriate screw systems, please consult your local specialized dealer or a qualified professional.
Preparation and Tools
Before you begin, gather your tools: a spirit level (?️), a pencil (✏️), and a measuring tape (?). If you are unsure about wall mounting, consult IKEA for guidance.
Assembly Steps
Step 1: Prepare for Vertical Mounting
Measure and mark two points on the wall that are 33.7 cm (13 1/4 inches) apart. Use a pencil to clearly mark these locations for screw placement.
Step 2: Install Wall Fixings (Vertical)
Insert screws into the wall at the marked points. Ensure the screws are securely fastened (?).
Step 3: Mount the Mirror (Vertical)
Align the mirror's mounting points with the screws on the wall and carefully hang it.
Step 1: Prepare for Horizontal Mounting
Measure and mark two points on the wall that are 67.5 cm (26 1/2 inches) apart. Use a pencil to clearly mark these locations for screw placement.
Step 2: Install Wall Fixings (Horizontal)
Insert screws into the wall at the marked points. Ensure the screws are securely fastened (?).
Step 3: Mount the Mirror (Horizontal)
Align the mirror's mounting points with the screws on the wall and carefully hang it.
Step 4: Adjust Mirror Angle
Use the adjustment screws to fine-tune the mirror's position for the best viewing angle. Turn the screws as needed (?).
