LILLÅSEN Desk Assembly Instructions
This document provides instructions for assembling the IKEA LILLÅSEN desk.
Product Overview
The LILLÅSEN desk is a stylish and functional piece of furniture from IKEA, designed with a bamboo finish. It features three drawers for storage.
Illustration shows the assembled LILLÅSEN desk with three drawers.
Required Tools and Parts
Assembly requires a screwdriver. The following parts are included:
- 3x Screws (Part Number: 100408)
- 10x Screws (Part Number: 154571)
- 1x Allen Key (Part Number: 130445)
Illustration shows a person holding a screwdriver and a screw.
Diagrams show incorrect and correct methods for handling parts during assembly, emphasizing the need for assistance and proper handling to avoid damage.
Assembly Steps
-
Step 1: Assemble the Frame
Attach the side frames to the crossbars using the provided screws. Ensure the parts are aligned correctly as shown in the diagram. Do not overtighten screws.
Illustration shows the assembly of the desk frame. Close-up views highlight screw insertion points and correct alignment, with a warning symbol indicating potential incorrect assembly.
-
Step 2: Attach Additional Supports
Connect the remaining support bars to the frame. Use the specified screws and ensure a secure fit. Refer to the diagram for correct placement.
Illustration shows the desk frame with additional support bars being attached. A magnified view shows the screw being inserted into the frame, with a warning against incorrect assembly.
-
Step 3: Secure the Top Surface
Place the desk top onto the assembled frame. Secure it using the provided screws. Ensure all connections are firm.
Illustration shows the desk top being placed on the frame and secured with screws. Close-up views show screw insertion and a warning against improper attachment.
-
Step 4: Attach Drawer Runners
Install the drawer runners onto the inside of the desk frame. Use the designated screws for this step.
Illustration shows the attachment of drawer runners to the desk frame using screws.
-
Step 5: Install the Drawers
Slide the assembled drawers into the runners. Ensure they move smoothly.
Illustration shows the desk with drawers being inserted into their runners, indicated by arrows.
-
Step 6: Attach Drawer Knobs
Attach the drawer knobs to the front of each drawer using the provided screws. Tighten them securely.
Illustration shows the attachment of drawer knobs to the desk drawers using screws. Arrows indicate the direction of insertion and tightening.
-
Step 7: Final Check
Review all connections to ensure the desk is stable and all parts are securely fastened. The desk is now ready for use.
Illustration shows the completed desk with arrows indicating the smooth operation of the drawers.
Care and Maintenance
Wipe clean with a damp cloth. Wipe dry with a clean cloth. Check regularly that all assembly fastenings are properly tightened and retighten as necessary.
Contact Information
For further assistance or inquiries, please visit the IKEA website or contact your local IKEA store.
