Sygonix LED Clip Lamp

1. Operating Instructions for Download

Download the complete operating instructions (or new/current versions) from www.conrad.com/downloads or by scanning the QR code. Follow the instructions on the web page.

2. Intended Use

This product is an LED clip lamp designed exclusively for indoor use. Avoid contact with moisture and outdoor use. Improper use can lead to damage, short circuits, fire, or other hazards. The product complies with national and European regulations. Do not rebuild or modify the product for safety and approval reasons. Keep these instructions safe and pass them on with the product.

3. Delivery Content

• LED clip light (main unit)
• Power adapter
• Operating instructions

4. Description of Symbols

Symbols used in the text or on the product:

• ℹ️ Read the operating instructions carefully.
• ⚠️ Warns of hazards that can lead to personal injury. Refer to the rating label for specifications and symbols.
• ⚡ Warns of dangerous voltage that can lead to personal injury by electric shock.
• III The main unit is constructed according to protection class III.
• Π The power adapter is constructed according to protection class II.

5. Safety Instructions

Read and observe all safety instructions and information for proper handling. Failure to do so may result in personal injury or property damage and will void the warranty.

5.1 General Information

• This device is not a toy. Keep away from children and pets.
• Do not leave packaging material lying around; it can become dangerous for children.
• For unanswered questions, contact technical support.
• Maintenance, modifications, and repairs must only be performed by qualified technicians.

5.2 Handling

Handle the product carefully. Jolts, impacts, or falls can damage the product.

5.3 Operating Environment

• Do not subject the product to mechanical stress.
• Protect from extreme temperatures, strong jolts, flammable gases, steam, and solvents.
• Protect from high humidity and moisture.
• Protect from direct sunlight.

5.4 Operation

• Consult an expert if you have doubts about operation, safety, or connection.
• If safe operation is no longer possible (visible damage, malfunction, improper storage, transport stress), take the product out of operation and protect it from accidental use. Do not attempt self-repair.

5.5 Power Adapter

• Do not modify or repair power supply components. Do not use damaged components. Risk of electric shock!
• Connect to an easily accessible wall socket.
• Use only the supplied mains adapter.
• Ensure the power adapter voltage matches your supply voltage.
• Never connect or disconnect with wet hands.
• Unplug by gripping the plug, not the cable.
• Disconnect during storms for safety.
• If the adapter is damaged, switch off power at the socket, unplug it, and use a new, identical adapter. Do not use the damaged adapter.
• Ensure cables are not pinched, kinked, or damaged by sharp edges.
• Lay cables to prevent tripping hazards.

5.6 Product

• Do not cover during use.
• Do not hang objects on the product.
• Do not touch the product with wet hands.

6. Product Overview

The product includes:

• 1. LED clip light (main unit)
• 2. Clamp
• 3. Power adapter (removable)
• 4. Power cord with On/Off switch

7. Getting Started

Preconditions: Suitable for tables with square edges and a maximum thickness of 27 mm.

1. Clamp the main unit to the edge of a suitable table.
2. Set the On/Off switch to OFF.
3. Connect the power adapter to the light unit's power cord.
4. Plug the power adapter into a suitable wall socket.
5. Use the On/Off switch to turn the light on or off.

8. Cleaning and Care

Important: Do not use harsh cleaning agents, rubbing alcohol, or other chemical solutions as they can damage the housing and cause malfunction. Do not immerse the product in water.

1. Disconnect the product from the power supply.
2. Clean the product with a dry, lint-free cloth.

9. Disposal

This symbol [WEEE symbol description] indicates that the device should not be disposed of as unsorted municipal waste at the end of its service life. Owners must dispose of WEEE separately. End users must remove batteries, accumulators, and lamps from WEEE before handover. Distributors are legally obliged to provide free take-back. Conrad offers return options via its offices, collection points, or public waste management authorities. End users are responsible for deleting personal data. Disposal obligations may vary outside Germany.

10. Technical Data

This product contains a light source of energy efficiency class E.

10.1 Power Adapter

10.2 Product

10.3 Light

10.4 Environment

10.5 Other