MAUL Scale Operating Instructions

Battery

The scale comes with a standard CR2032 battery. The battery compartment is on the base of the scales. Please note polarity marking. Before using the scales remove the plastic protection.

Positioning the scales

Please ensure that the scales is in a horizontal position.

Weighing (ON)

After switching on the scales with the ,,ON/OFF/TARE" key, ,,88888" appears in the display. Please wait until zero appears. Then place the weight on to the scales and read off the weight.

Net weighing (TARE)

Place an empty container (i.e. first weight) on to the scales and then subtract this weight by pressing the key until zero appears. Fill the container (i.e. add second weight to the scales). Only the additional weight is indicated in the display.

Switch off (OFF)

Press the key ,,ON/OFF/TARE" until the display disappears. Automatic switch-off will occur after approx. 2 minutes, if no change of weight occurs in this time.

Switching the weight units g or oz

The scales can show the weight value in g or oz. Press the ,,UNIT" key when the scales is turned on. Press the key again to change the weighing unit.

User calibration

If needed, the scales can be recalibrated by the user. Switch the scales on and set the measurement to "g". Press the key "ON/OFF/TARE" rapidly four times in a row and hold. A number appears with or without a sign. Press the "ON/OFF/TARE" key again. "ZERO" appears, followed by "2000". Now place a 2kg calibrated weight on the scales and press the "ON/OFF/TARE" key. "CAL" first appears on the display, then "PASS" and finally "2000g". The scales has been recalibrated. Important: the scales must not be exposed to any vibration or draft during the calibration.

Explanation of the special symbols

1. Switching on: After pressing the ,,ON/OFF/TARE"- key all symbols appear. You can check whether all segments are clearly shown on the display. Zero indicates that the scales is ready for operation.
2. Negative value: Press the ,,ON/OFF/TARE"- key once again.
3. Overload: If the weight exceeds the total weighing capacity of the scales, ,,O-Ld" appears in the display.
4. Energy Supply: If appears on the display, the battery need to be changed.

Precision

This device corresponds to requirements stipulated in 2014/31/EU. Every scale has been carefully calibrated and controlled during the production process. The tolerance is ± 0,5% ± 1 digit (at Temperatures between +5° and +35° C). Incorrect display values due to damage attributable to improper handling, mechanical damage or malfunction is exempt from liability. Damages due to faults are also exempt from the guarantee. No liability is accepted for consequential damages or losses by the buyer or the user.

Compliance

This device complies with the requirements of EC Directive 2014/31/EU. Note: Unusual electro-magnetic influences (jammers in the immediate vicinity) may affect the display value. After the end of the interference period, the product can be used again as intended. These scales cannot be used for official metrology.

	MAUL Scale User Manual: Operation, Calibration, and Features Detailed user guide for the MAUL scale, covering setup, weighing, tare function, unit conversion, user calibration, and symbol explanations. Ensure accurate measurements with this reliable digital scale.
	MAULsquare Scale Operating Instructions and Specifications Comprehensive guide for the MAULsquare scale, covering operation, calibration, units, troubleshooting, and precision specifications. Includes multilingual instructions.
	MAUL Digital Scale: Operating Instructions & User Guide Comprehensive operating manual for the MAUL digital scale. Learn how to set up, weigh, calibrate, and troubleshoot your MAUL scale for precise measurements. This guide ensures optimal performance and safe usage.
	MAUL Weighing Scale Operating Instructions Detailed guide for operating the MAUL weighing scale, covering power supply, weighing, tare function, counting, calibration, error indicators, and precision specifications. This manual provides essential information for the safe and effective use of the MAUL scale.
	MAUL Package Scale Operating Instructions Comprehensive operating instructions for the MAUL Package Scale, covering power supply, battery replacement, positioning, weighing, tare function, unit conversion, counting, user calibration, and troubleshooting symbols.
	MAUL Digital Scale Operating Instructions and User Guide Comprehensive operating instructions and user guide for the MAUL digital weighing scale, covering transport protection, battery installation, positioning, weighing, tare function, unit switching, symbol explanations, overload indicators, precision, and compliance information.
	MAULalpha Digital Scale (Model 16405) - Technical Specifications Detailed technical datasheet for the MAULalpha digital scale, model 16405. Features include 500g capacity, 0.1g division, automatic shut-off, and a compact design. Includes dimensions, specifications, and operational features.
	MAULgloss Digital Scale: Operating Instructions and Features Comprehensive operating instructions and product information for the MAULgloss digital scale, covering features, usage, and troubleshooting. This manual is available in multiple languages.